Question about Samsung LA26R71BD 26 in. HD-Ready LCD TV

1 Answer

"Weak or No Signal" message on Samsung 26" LCD TV

Why is it that more often than not, I get the "Weak or No Signal"message on some of my channels? I am hooked up to cable (no box -- just have it for the reception). I tried the cable setting, as well as the TV setting. Didn't have this problem with my old analog 13" television It is VERY frustrating! The TV has a mind of its own!

Posted by on

  • Scott Frye
    Scott Frye May 11, 2010

    Hi....
    Are you using the chrome screw-on type connect for the cable?
    Does the one on the TV seems loose and, have you tried a new cable between the cable box and TV yet?

    Let me know


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I pressed mute on my television and about 5 minutes later it said weak or no signal.What do I do?

Posted on Nov 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do I loose the signal on channel 26 only?


sounds like a weak signal might help if your antenna was on a mast for a better reception

May 05, 2014 | Vizio L32 32 in. LCD HDTV

3 Answers

Samsung LCD TV ''Weak or No Signal''


try swicth cable box for testing....if sam problem..need replaced tv main board

Jan 01, 2010 | Samsung LN32A330 32 in. LCD TV

1 Answer

I get a 'weak or no signal' message and can't get an AV2 choice at all , just 'free to air' tv channels


reception issues require a better signal source, attic or roof antenna should solve your dilema
Samsung should stop at AV2 when something is plugged in the correct socket, if it doesn't check for a bad cable.
E

Aug 01, 2009 | Samsung LA26R71BD 26 in. HD-Ready LCD TV

3 Answers

Samsung lcd tv is saying low or weak signal when trying to tune it in


you can only use your tv to scan for channels with an antenna or if you have that tv hooked to cable television. use your Directv receiver to scan for channels, if you have an antenna hooked up to it. --------------- click this link for more help http://www.highdefforum.com/directv-forum/77638-new-lcd-tv-d-sd-no-weak-signal.html thaNKS.

Jul 11, 2009 | Samsung LE40R74BDX 40 in. LCD Television

1 Answer

Digital - Weak or no signal digital coax when hdmi dvd player on


if u have placed your DVD next to your tv ... just maintain distance between then and check out

Apr 01, 2009 | Samsung LE40R74BDX 40 in. LCD Television

2 Answers

No signal or weak signal


Sorry I see the model,
hold the Menu button on the TV (not on the remote) down for three seconds.
Note: Shop Mode is activated in the same manner: Pressing and holding the Menu button on your TV for three seconds. To avoid accidentally setting your TV to Shop Mode, avoid pressing and holding the Menu button on the TV for three seconds or more.

Sep 21, 2008 | Samsung LN-T4061F 40 in. LCD HDTV

3 Answers

Weak or no signal message


  1. Since my problem (Samsung/Comcast) began with a channel selection button pushed on the TV remote when it should have been pushed on the cable remote, I figured the problem lay with the TV.  Although I was getting the "weak or no signal" msg., the actual signal strength bar graphic showed it to be strong. Disconnecting did no good. I surmised that the TV was simply not recognizing the box.
  2. I looked at the manual for my Samsung 750 model. 
  3. Page 20 discussed "Selecting the source". I accessed the TV menu and selected "Input", then chose the "HD..." item from the highlighted list. Voila! My tv works again. 

Jun 08, 2008 | Samsung LN-S4092D 40 in. LCD HDTV

1 Answer

Weak or no signal message


Is this a joke? How am i suppose to get help?

Dec 17, 2007 | Samsung LN-S4092D 40 in. LCD HDTV

Not finding what you are looking for?
Samsung LA26R71BD 26 in. HD-Ready LCD TV Logo

3,144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69745 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...