Question about Xerox WorkCentre 220 All-In-One Laser Printer

2 Answers

Xerox pe220 cannot copy

I have workcenter xerox pe220, the problem is i cannot copy any document, it says "function impossible" always appears when i press start button, and no page copied. i have tried to enter the tech mode and clean count of used toner count but no effect and the machine still cannot copy. when i try to print and install the driver the machine cannot print too?? by the way i use refill toner and once replace the chip... so can you help me with this problem???

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have the same problem too with my pe220. fortunately, i just purchased a new one which i planned to give to it to a relative, and I was able to figure out that the cause of the "function impossible" displayed.
the problem just occured this morning and I have tried downloading and updating the firmware too, clearing the memories, etc but cannot get the copier to work (can't print thru the pc also).

i then borrowed the new toner cartridge of the new pe220 and installed on my old one and i was able to print and copy again. the problem then is due to the chip memory.

the problem now is how to reset the serial eeprom chip in order to reuse the toner cartridge again.
hope this helps.

Posted on Mar 10, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Hi,i have Xerox Pe220,i am not able to copy as paper comes out blank but i can print from computer,PLEASE HELP!.

Posted on Mar 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Xerox 6505 printer


lunch the cleaning function from your device utilities.

Apr 06, 2016 | Xerox WORKCENTER 6505N COLOR LASER MFP,...

1 Answer

How do I fix a printing problem where the error message load tray 1 keeps appearing?


You Really need to have this Machine Cleaned. there is too Much Paper dust On the sensor

Jun 06, 2015 | Xerox 6505/dn Workcenter 6505dn Color...

1 Answer

Where can I get printer driver for Xerox WorkCenter M118, I'm using Win 7


The M118 is a PostScript printer, which is an older (but fully functional!) protocol that allows Windows to print the correct fonts and typesetting.

In order to use this device as a printer, you will need to have the PostScript module installed in the printer, and then install the printer drivers.

Drivers can be found at this link, and support documentation at this link. The two particular support documents you'll want to review are the User Guide and the PostScript User Guide.

Hope this is helpful!

May 09, 2011 | Xerox WorkCenter M118 All-In-One Laser...

1 Answer

My workcenter PE220 Xerox is displaying scanner locked and it is not printing or copying. What do I do?


The manual says to unlock it. You will probably need the same password that you used to lock it.
Good luck!

Mar 23, 2011 | Xerox Phaser 3300mfpv/x Print Copy Scan...

1 Answer

Hi,i have Xerox Pe220,i am not able to copy as paper comes out blank but i can print from computer,i have replaced new cartridge but same result and put back the old cartridge,PLEASE HELP!!


Iffi,

Are you making copies on the glass or ADF? If you are getting blank copies using both the glass and ADF than your CIS(scanner) unit is bad.

-

Mar 22, 2011 | Xerox WorkCentre PE220

2 Answers

My xerox PE220 machine give LSU error. not any work in done plz give solution


plz solve my problume in my printer workcenter pe220 lsu eror and not working this time to help me plz

Dec 18, 2010 | Office Equipment & Supplies

2 Answers

XEROX WORKCENTER PE220 , ITS SHOWING LSU ERROR . ITS NOT PRINTING OR COPYING ANYTHING . PLEASE GIVE SOLUTION


This is an Issue with the Laser Unit. you can try to Plug it off from the socket and leave it for 10 min and try reconnect if this does not work it could be a genuine error and needs and technical visit

Aug 31, 2010 | Office Equipment & Supplies

2 Answers

Xerox PE220 workcenter shows LSU Error message.


XEROX WORKCENTER PE220 , ITS SHOWING LSU ERROR . ITS NOT PRINTING OR COPYING ANYTHING . PLEASE GIVE SOLUTION

Dec 17, 2009 | Xerox Phaser 8500/DN Printer

1 Answer

Soft copy of the printer


The guides can be located at Xerox.com under documentation. They can be downloaded easily

Jun 03, 2008 | Xerox WorkCenter PE120i All-In-One Laser...

Not finding what you are looking for?
Xerox WorkCentre 220 All-In-One Laser Printer Logo

2,313 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...