Question about Kenmore 79012 / 79014 / 79019 Gas Kitchen Range

1 Answer

Door locks and F9 fault codes

I set the self-cleaning option. I had to cancel it. When I pushed the cancel button, the F9 error code came up. Then it started beeping. Door lock light began flashing. There was a noise like the door lock mechanism was trying to engage or disengage. Continued beeping. Beeping finally stopped. Door lick light still flashing. Unable to use oven

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

The F9 code indicates there is a problem with the door lock.

Try disconnecting the power to the range for 10 seconds and reconnecting. Open the oven door and hold the door switch plunger in while you try these things. Put the control into clean for 5 minutes then cancel clean. You must hold the door switch plunger in for the 5 minutes.

Try canceling the clean cycle without putting the control into clean.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Oct 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore Range Model 95012102. After canceling the self cleaning oven process the code E1-F5 appeared on the display panel and the oven remains locked.


Hello,

The F5-E1 error code means that one of the switches on the door latch hasn't fully set itself to the door open(non clean) mode. One thing to try is to open the oven door and push the light switch in by hand while pushing the clean button on the control and see if the latch will open just a little more thusly the switch will open a bit more into the normal mode.

If by pushing the clean button...waiting 5 minutes (whith the door open)then push cancel and see if the latch fully opens..the door latch switch would need to be replaced.

The part number for the latch asm. which includes the switch is W10107820


GENE

Sep 05, 2011 | Kenmore 95012 / 95014 Electric Kitchen...

1 Answer

Tried to cancel self cleaning and now the door is locked. F9 appears frequently. Have turned off the breaker and unplugged the stove. Door is still locked.


Hi mariebeane,

The F9 error code description is a door latch failure. Replace the door latch switch or assembly if necessary.

Hope it helps.

Thank you for using FixYa.

Jan 09, 2011 | Amana ACS3350AS Gas Kitchen Range

1 Answer

Kenmore Electric Range model 790 has F9 & F1 code error


Hi,
Before you go working too hard to get you oven to go into the self clean mode....check out this tip...


http://www.fixya.com/support/r3969401-self_cleaning_oven_problem

heatman101

" Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!! "

Apr 20, 2010 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...

1 Answer

Kenmore oven self cleaning oven dispalys F9


The F9 code indicates there is a problem with the door lock.

Try disconnecting the power to the range for 10 seconds and reconnecting. Open the oven door and hold the door switch plunger in while you try these things. Put the control into clean for 5 minutes then cancel clean. You must hold the door switch plunger in for the 5 minutes.

Try canceling the clean cycle without putting the control into clean.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Nov 12, 2009 | Kenmore 90154 / 90152 Electric Kitchen...

1 Answer

F9-6 fault code on maytag gemini double oven range


I waited until the next morning and hit the cancel button. It cleared the error

Apr 09, 2009 | Kitchen Ranges

1 Answer

How do I clear error beeping (F9) on my Amana gas range


try to hold in on the oven light switch plunger that the door would hit if it was closed properly. what you probably did was to pull the door open while it was trying to lock. once you hold the plunger in, then hit the clean cycle again and then push to cancel button to get the door latch to unlock the door. it may take a minute or two but that should clear up the error code and let you use the oven again.
next time if you push the clean by mistake, just let it go and then when it says "locked" just push the cancel button. it will unlock and be ready to use.

Jan 27, 2009 | Maytag MER6772 Gemini Electric Kitchen...

3 Answers

I get failure code F9-3


What a scam by service personnel.
-Simply press "Stop/Clear", then gently push the door handle until "Lock" appears on the screen. Press "Stop/Clear" again and the door unlocks itself!
J. Kalicak

Jan 22, 2009 | Jenn-Air JES9800A Electric Kitchen Range

2 Answers

Frigidaire Range FEF357BBD error code F9


I had the situation where the oven thinks the door is locked but it was not locked. Setting and holding clear eventually gave a f9 error.
I solved this by turning the circuit breaker off and taping over the oven light switch ( so it thinks it really is locked ) and turning on the breaker. The oven unlocked and appears fine now.

Nov 09, 2008 | Frigidaire PLEF398AC Electric Kitchen...

1 Answer

Cancelled self-clean, F9 code came up, door lock light flashing, can't use oven


HI,
your model number confirms that your range was manufactured by WCI (Frigidaire). although this doesn't help you now, it may help if parts are needed.

now, there is an indepth guide online to fixing this common problem and I would like you to go through it and see if it helps you solve your problem.

http://www.applianceaid.com/clean-lock.html

If you have found this site previously then I apologise, if you still need help, by all means post again and someone more qualified may help.

Hope this is of use to you ;)

Phil

Oct 25, 2008 | Kitchen Ranges

2 Answers

Amana stove stuck in 'lock' mode, door won't open


try hitting cancel is it displaying any error codes like e2 f3 try turning the breaker for five seconds then back on

Dec 28, 2007 | Whirlpool RF378 Electric Kitchen Range

Not finding what you are looking for?
Kenmore 79012 / 79014 / 79019 Gas Kitchen Range Logo

685 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Mike Carew

Level 3 Expert

958 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...