Question about HP PSC 750 All-In-One InkJet Printer

1 Answer

Hp 750 psc will not copy; it just says scanner failure over

Hp 750 scanner will not copy; it just says scanner failure and keep turning on and off but just says the same thing pver and over

Posted by on

  • 1 more comment 
  • Mabe Ryall Feb 24, 2009

    I tried to install an Hp Laserjet 3330.I couldn't get it to work, but I had already uninstalled my HP psc 750.Now I can't get it to reinstall. I get an error Windows does not support 5.1, 5.2 etc. It won't accept the disk .I have Windows XP.

  • Mabe Ryall Feb 24, 2009

    I can't install my old printer back.I completely uninstalled HP Laserjet 3330 . But my psc 750 won't install on my Windows XP. I am getting really frustrated and would appreciate any help.

  • Anonymous Mar 11, 2009

    I too am having the SAME problem and it is driving me crazy! One solution suggested new ink cartridges, and that had to be HP cartridges. I changed and it worked! for a short time... now back to doing the same thing. And now it won't even print unless I have the printer turned off BEFORE I send the document to print, then get the printer failure message, turn on the printer and then it will print. I am ready to throw in garbage!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Scanner failure


The only thing you can try is make a copy using only your PSC . If the problem persists , it may be a problem with scanner lamp . Contact an Assistance Support.

Dec 09, 2010 | HP PSC 750 All-In-One InkJet Printer

1 Answer

I keep getting a "Scanner Failure" error message every time I try to make a copy. I have tried all the trouble shooting the HP manual suggests but still no luck. Anyone know how to get rid of this...


This series of HP all-in-one units have a common problem that, over time, the exposure lamp. which is florescent, goes dim. The scanner looks for the right amount of light, and if it doesn't see it, it gives you the scanner failure. In some rare cases, you can dismantle and clean the mirrors and lens in the scanner, but most of the time it doesn't work.
There are no parts available for this unit.

Oct 18, 2010 | HP PSC 750 All-In-One InkJet Printer

2 Answers

Scanner failure on HP psc 750


* Does the unit scan properly from front panel button?

* Does the unit scan properly from HP Director software?

* Does the unit make stand alone copy properly? (please make a copy from the unit with out connecting to the computer)

Please get back to me with the above information

:) Dr Tony

Apr 15, 2010 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

HP PSC 750 PRINTER WORKS GOOD. SCANNER FAILURE. SAYS TURN OFF AND ON.


Inside in the scanner section have a too much ash on the mirrors.You need to disassembly the scanner, then the scanner section and clean the ash from mirrors.Other way is replace the scanner section.

Oct 09, 2009 | HP PSC 750 All-In-One InkJet Printer

1 Answer

Wont scan or copy,


Hello,

I have seen other HP scanner/printers with very similar problems in our shop. On many of them it is caused by dirty scanner glass or dirty mirrors. We have a tech page with step by step cleaning that should help you. You can find it at
www.ccl-la.com I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com
Over 21 years of PC and printer support/repair

Jul 03, 2009 | HP PSC 750 All-In-One InkJet Printer

2 Answers

My hp psc 750 will print from my computer, but I cannot make a copy. It keeps saying, "Scanner Failure. Turn off and on again." I have done this several times and it still will not make a copy.


My hp psc 750 will print from my computer, but I cannot make a copy. It keeps saying, "Scanne Failure. Turn off and on again." I have done this several times and it still will not make a copy.

Apr 20, 2009 | HP PSC 750 All-In-One InkJet Printer

1 Answer

Scanner Failure


The only thing I can surgest is that you check installed programs I found that the 750 is very fussy about being the only kid on the block. Maybe worth trying a commercial program that says it will remove "junk" from your hard drive

Aug 24, 2008 | HP PSC 750 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 750 All-In-One InkJet Printer Logo

Related Topics:

721 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...