Question about Cyberhome CH-DVD 300 DVD Player
SOURCE: Cyberhome Ch- DVD 300
Your advice was very helpful. After two+ months of tooling around and navigating around the menu blind I was on the brink of trashing it.
At first I tried the stop button with a dvd in the player with no success. After taking the dvd out, turning in off/on then pressing the stop button for 20 seconds the screen turned blue as said.
This help saved me a great amount of fustation.
Posted on Jun 07, 2008
Try this method to change the region.
1. Switch player on, making sure that there's no disc in the tray.
2. Close tray.
3. Using the remote control, key in the following: MENU, 1, 9.
4. A menu will appear with the region option near the bottom of the screen.
5. Press ENTER, enter the desired region AND PRESS ENTER again to save the desired region.
6. Next press OPEN / CLOSE.
Posted on Nov 20, 2008
Working remotes for cyberhome dvd players can be purchased on the e-bay website. You can also try having some one look at the unit , it may be a simple problem of cold solder joints or loose contacts with battery holder causing your remote failure. If not for a few dollars you can find a working one on e-bay. I hope this helps you with your problem.
Posted on May 18, 2009
Tips for a great answer:
on Apr 11, 2010 | DVD & Blu-Ray Players
on Apr 10, 2010 | Cyberhome CH-DVD 300 DVD Player
Oct 20, 2010 | Cyberhome CH-DVD 300 DVD Player
Dec 28, 2008 | Cyberhome CH-DVD 300 DVD Player
29 people viewed this question
Usually answered in minutes!