Question about Cisco Computers & Internet

Open Question

CUBAC Issues When I enter the 60-day Evauluation Registration numbers for Cisco Unified Business Attendant Console, all my options disappear on the (5-day eval) GUI except for: Service Parameters Database Parameters Help I've formatted and installed this server 4 times already and have not figured out how to get this Eval Copy of CUBAC from Arc-Solutions/Cisco to install/work properly. Are there any known issues for CUBAC during installation?

Posted by on

4 Suggested Answers

  • 5 Answers

SOURCE: Dell Poweredge sc1420 and novell

Hello Moshe88, Can you give me your server's Service Tag please, so I can get a look at the hardware spec of the system please? I'll then be able to assist further. Thanks reaxion

Posted on Jun 20, 2007

  • 118 Answers

SOURCE: Installation Issues

you can load the bios manual from this link

Posted on Nov 21, 2007

  • 4 Answers

SOURCE: Setup can not find any hard disk while installing win 2003

During setup you must specify any raid drivers that are required. Have the raid controller driver on floppy and insert when prompted.

Posted on Apr 23, 2009

  • 13 Answers

SOURCE: While i was formatting a TC2120 server, i used low

This error message usually relates to the wrong third party scsi drivers being use.

Check what SCSI card you have installed and make sure you have the correct drivers and that you select the correct driver from the list at the appropriate time.

It is also possible that the SCSI card itself has a problem, but it is far more likely to be the wrong driver.

Posted on Aug 11, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Server will not PXE boot

Many routers fail because they do not support the DHCP option. Any CISCO product running ISO 12.2 and above has that ability. Contact CISCO for the PXE assignment.

Dec 21, 2013 | Dell PowerEdge M905 (becw9k1_7) Server

1 Answer

When I connect it the port goes up and down, and also in which models it can be installed.

Go to Cisco . com and download the current drivers. Make certain you know if you are a 32 or 64 bit system.

Sep 13, 2013 | Cisco 2fe 2w 800-04797-01 G0 F0 Ethernet...

1 Answer

Not able to use two cisco 4-port clear channel T1/E1 HWIC

Drivers not installed correctly. Go to Cisco for current drivers and do a full installation.

Sep 12, 2013 | Cisco 4-Port Clear Channel T1/E1 HWIC

1 Answer

M11ix driver winxp dirver

Hello the drivers should be available here:

If i am wrong by my selection, enter the machines number here:

You have to select what windows system you are searching the driver for.
The machines number, is located at the back of the server.
It should be something like this:
IBM eServer 206m -8485PBK-

Here are many different drivers, so you just have to try.

Hope this will help you

Jun 05, 2013 | Computers & Internet

1 Answer

Console to asa 5520

Your are correct, it is a 5520 ASA and thus it requires immediate attention. Console is dependent on the 5520 without a doubt and should you fail to connect them accordingly; the entire process will be in vein. Good luck Captain.

Jan 16, 2013 | Cisco As2511-rj Universal Access Server...

1 Answer

Where can i get 2 onboard Broadcom NetXtreme 10/100/1000 for IBM server

Variety of places, depending where in the world you are, and the MPN of the part you want I guess.

Local IT Supplier,
Discount Cisco,

Jan 09, 2012 | Cisco MCS 7816-I4 Media Convergence Server...

1 Answer

How to install ssl certificate on ACS 32

Installation of a certificate on Cisco ACS Note: ACS only supports PKCS12 certificates. Before installing a certificate, ensure that the certificate is of this type.
To install a signed certificate: Step 1: Choose System Administration > Server Management > Certificate.
The Certificate page appears.
Step 2: Click Install Certificate.
Step 3: On the Install Certificate page, enter values for:
• Server Certificate Format
This is a display-only field, and displays the PKCS12 certificate type.
• Server Certificate File
Enter the path to the local directory in which you saved the certificate file; optionally, click Browse.
• Private Key Password
Enter the private password key, which can be up to 32 characters.
• Confirm Private Key Password
Confirm the private key password.
Step 4: Click Install.
Step 5: To activate the certificate, you must restart all the processes on the ACS View server.
To restart the server from the:
•GUI-Choose System Administration > System Reports > Process Status, and click Restart ACS View Server.
•CLI-Access the CLI in the EXEC mode, and run these commands:
-process stop all
-process start all

Mar 08, 2011 | Avocent Cyclades® ACS32 (ATP0156) Server

1 Answer

Could not detect ATA drive

Get into the bios/setup of the server (hit either of f2 or f10 or del keys during start up) and somewhere you should have an option to set the ATA/SATA hd to legacy mode, that should do it.


Mar 13, 2009 | Cisco MCS-7825I1 (MCS7825H1ECS1) Server

1 Answer

Connecting my router

Did you unplug the power to the cable modem for at least 15 secs, prior to plugging in the router?
This in fact does fix alot of startup problems.


Feb 28, 2009 | Cisco Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts


Level 3 Expert

2072 Answers

Kirk Augustin
Kirk Augustin

Level 3 Expert

2019 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides