Question about RCA DRC277 DVD Player

1 Answer

How do i hook up my rca dvd to my samsung tv its hooked up right but i can'y figure out how to get the tv on the right channel for it to work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,992 Answers

This DVD player only has audio and video outputs. You'll need to connect it through one of your TV's A/V inputs, then switch to that input to see the DVD signal.

If your TV doesn't have A/V inputs available, you'll need to connect the DVD player using an RF converter. This takes the audio and video signals from the DVD and produces a channel 3 or 4 output you tune in on your TV. Converters cost around $10 to $20 and are available at Radio Shack or retailers who sell TV's.

Posted on Mar 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rca j25420 (Older device)


Basic DVD player connections consist of three wires: Right audio (red), left audio (white), and video (yellow). These plug into corresponding connections on the rear of the TV. Your RCA TV may be so old it does not have these input connectors on the rear. Tne "game channel" you are attempting to find does not exist.

Dec 18, 2013 | Televison & Video

1 Answer

Dvd hookup


It sounds that you are connected the TV with DVD player Via AV cable. In this case, no RF channels won't go. You have to select its AV option. Check it. Refer the user manual for TV.

Aug 12, 2013 | RCA F19251GY 19" TV

1 Answer

Connecting dvd player to a television need a diagram t.u


Hi,

If you are going to hook up the DVD player to your TV through RCA cords, see the picture below.


jdvillanueva_120.jpg


Hook up the yellow RCA cord at the Video-in at the back of the TV and the other end at the Video out of the DVD player to get the video.

Hook up the red RCA cord at the Audio-in(right channel) at the back of the TV and the other end at the Audio-out of the DVD player.
Hook up the white/black RCA cord at the Audio-in(left channel) at the back of the TV and the other end at the Audio-out of the DVD player.

Red and white/black RCA cord is for the sound.

Hope I helped you.
Have a nice day!
Thanks for using Fixya.

Sep 07, 2011 | Televison & Video

1 Answer

Hi I have a orion tv and I can not figure how to get it to play a DVD player or to program a remote to turn the channels I need help


How to hook up a DVD Player:
http://www.wikihow.com/Hook-Up-a-DVD-Player

How to program a universal remote:
http://www.ehow.com/how_9191_program-rca-universal.html

Mar 20, 2011 | Orion STV2763 27" TV

2 Answers

Trying to hook up an emerson dvd player to tv and its not working? older tv it has no cable hook up or control box for channel set up, shouldnt the dvd player still be able to work though?


IM GUESSING THIS MIGHT BE AN RCA TELEVISION? if you dont have an rca in hook up on the tv give up and buy a new tv or you can find an older item what it is is a switch that has an rca input and a coax output it was used to hook up the older video game systems it is still sold in most stores and that will work if you do have rca inputs and lost the remote you need to get a universal remote to switch the input on certain older rca tv's you could go to channel 00 and it would set it to the input with the switch you shoudl be able to use it by putting the tv on channel 3

Feb 28, 2010 | Emerson EWD7001 DVD Player

1 Answer

Hooking up my DVD/VHS player to TV & Convertor box


I would just hook up the dvd/vhs player with the red,white,yellow rca cables that should of come with your unit and just go to the input on the tv to watch your dvd/vhs player. This will give you a better picture and sound while allowing you not to have to watch dvd/vhs on a channel which helps make the dvd/vhs player independent. Also if possible I would hook the converter box up with the red,white, yellow rca cables to the tv as well if your tv has more than one set of red,white,yellow plugs since it is a better connection that coax and you probably watch more tv than vhs/dvd anyway. So bottom line try to hook up both boxes red,white,yellow and watch each box on different inputs instead of like channel 3 or 4. Also to record of converter box you can run coax from converter box to dvd/vhs combo and make sure your dvd/vhs player is on tuner input or channel 3.

Nov 16, 2008 | Insignia Digital-to-Analog Converter for...

1 Answer

RCA F32450 TV can not get the TV to display the DVD menu


You can get a remote from Electronicadventure.us for $29.95. The remote number you are looking for is RCA-GE-PROSCAN 242524

Nov 15, 2008 | RCA F32650 32" TV

1 Answer

Magnavox MWR10D6 can't record from camcorder wrong channel


OK...try this...plug your RCA cables from your camcorder into the RCA input jacks on the back of the recorder. If you have a VCR, it can be plugged into the coax input on the back of the recorder. Use the coax output and plug it into a RF modulator (about $20 at Wal Mart). Plug the RCA output cables from the recorder into the RF modulator as well (Don't ask me why, but it seems to work on mine). Connect a coax cable from the RF modulator to the TV. Make sure the TV and Recorder are both on the right channel. The RF modulator will have a channel switch to use channel 3 or 4 on the TV. Make sure the recorder is set to E1 (Rear). You can check this with the channel +/- buttons on the bottom right of the remote. Good luck.

Jan 06, 2008 | Philips Magnavox MWR10D6 DVD Recorder

2 Answers

I need help with my tv and dvd/vcr combo


Hmmmm...I dont understand exactly what you are saying, but it sounds like your TV doesnt have RCA ports and you want to hook up a newer DVD player that uses RCA ports. If you have only a cable port (silver threads with a hole sticking out of back) on TV and RCA ports on DVD player, you have to buy a converter. You can get one at Wal-Mart for 20-30 dollars. Or you can just update your TV which it sounds like you badly need to do! :)

Dec 24, 2007 | Sanyo DVW-7200 DVD/VCR

1 Answer

Cyberhome dvr 1600


How is the unit working is it hooked up by a cable,optic,RCA cables,composit,or component, Let me know, You may have to just turn the channel on the television to aux or channel 3 of 4, If that don't help let me know, we can figure something else out once I find out how you are hooked up. Happy Holidays

Dec 05, 2007 | Cyberhome DVR 1600 DVD Recorder

Not finding what you are looking for?
RCA DRC277 DVD Player Logo

Related Topics:

518 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71088 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2273 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...