Question about HP 48gx Calculator

1 Answer

Hp48gx got wet and wont communicate wit sokkia surveying equip?

Help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 7,987 Answers

Hello,
.
You can reset the calculator:

Turn the back of the calculator towards you. Extract the top left rubber pad on the back of the calculator and use a paper clip to press the Reset button. If that does not restore the calculator to health, you should perform the dagnostic tests.

The following procedure valid for the 48G should work for the HP48GX.
Make the calculator perform a
Self test.

  1. Turn calculator on
  2. Press and HOLD the key [ON]
  3. Press and release the key with "E" to its right (the one before last in first row)
  4. Relaese the [ON] key.
It tests the RAM and ROM. You will see various patterns on screen. Afterwards you should see
IROM OK,
IRAM OK,
HP48GX OK
The self test will continue repeatedly until you perform a
System Halt
  1. Press and HOLD the [ON] key
  2. Press and release the "C" key
  3. Release the [ON] key.
The empty stack should appear.

If you do not see IROM OK and IRAM OK, the calculator requires service.

If the above procedure is successful, you may want
to test the keyboard.
  1. Turn calculator on
  2. Press and HOLD the [ON] key
  3. Press and release the "D" key.
  4. Release the [ON] key
  5. Press and release the "E" key. KBD 1 should appear on the top left corner of the screen.
  6. Starting at the upper left corner of the keyboard, and moving Left to right, press every key in sequence. If you follow the sequence and the keys are functioning properly you should hear a hight pitch sound at each press.
  7. If everything is OK, when you press the last key (+) the screen displays KBD 1 OK.
To exit the keyboard test proceed as described above under System Halt.

If you follow the proper sequence and a hexadecimal number appears after pressing a key, the calculator requires service.-

For repairs
There is an HP customer self repair (CSR) which you can contact. On the site it is sais that the service is available for products under warranty or on contract. but you have nothing to lose by contacting them. Here is the link to the web site

You can also try this site. They do repairs on most models, except the newer ones.

Posted on Nov 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to disable beeping sound on HP48gx?


Press right-shift MODES to bring up the mode screen, then uncheck the "BEEP" option.

Apr 13, 2012 | HP 48gx Calculator

1 Answer

Need a Manual for my TDS GX card used with HP48GX


http://www.tdsway.com/binaries/tdscogoforhp48gx/documents/manuals/COGOManual&Reference.pdf

Mar 09, 2011 | HP 48gx Calculator

1 Answer

I would like to buy another programme module topographic Topo 1 and Topo 2 for my calculature HP 48 SX giorgiombr@yahoo.it ...


Here is the link to a web site where you can find resources for the HP48GX ( apparently your calculator is an HP 48SX).

On this other site you can view surveying software for the HP 48GX that is still available for sale.

Aug 14, 2010 | HP 48gx Calculator

1 Answer

Hp48gx is autistic


Hello,
The following procedure valid for the 48G should work for the HP48GX.
Make the calculator perform a
Self test.
  1. Turn calculator on
  2. Press and HOLD the key [ON]
  3. Press and release the key with "E" to its right (the one before last in first row)
  4. Relaese the [ON] key.
It tests the RAM and ROM. You will see various patterns on screen. Afterwards you should see
IROM OK,
IRAM OK,
HP48GX OK
The self test will continue repeatedly until you perform a
System Halt
  1. Press and HOLD the [ON] key
  2. Press and release the "C" key
  3. Release the [ON] key.
The empty stack should appear.

If you do not see IROM OK and IRAM OK, the calculator requires service.

If the above procedure is successful, you may want
to test the keyboard.
  1. Turn calculator on
  2. Press and HOLD the [ON] key
  3. Press and release the "D" key.
  4. Release the [ON] key
  5. Press and release the "E" key. KBD 1 should appear on the top left corner of the screen.
  6. Starting at the upper left corner of the keyboard, and moving Left to right, press every key in sequence. If you follow the sequence and the keys are functioning properly you should hear a hight pitch sound at each press.
  7. If everything is OK, when you press the last key (+) the screen displays KBD 1 OK.
To exit the keyboard test proceed as described above under System Halt.

If you follow the proper sequence and a hexadecimal number appears after pressing a key, the calculator requires service.
Hope it helps.

Jul 16, 2009 | HP 48gx Calculator

2 Answers

Spilled beer


Never try to turn on electronics when they are wet because you can cause more damage.

Nevertheless, remove the batteries and dissasemble the calculator. Rinse with water. Use a lint-free swab soaked in isopropyl alcohol to gently remove stubborn grime. Dry with a blow dryer on cool setting. Air dry 2-3 days. Reassemble and test.

Good luck

Apr 11, 2009 | HP 48gx Calculator

1 Answer

I HAVE A HP-48GX THAT WANT TURN ON.


Hello,

You can reset the calculator:

Turn the back of the calculator towards you. Extract the top left rubber pad on the back of the calculator and use a paper clip to press the Reset button. If that does not restore the calculator to health, you should perform the dagnostic tests.

The following procedure valid for the 48G should work for the HP48GX.
Make the calculator perform a
Self test.
  1. Turn calculator on
  2. Press and HOLD the key [ON]
  3. Press and release the key with "E" to its right (the one before last in first row)
  4. Relaese the [ON] key.
It tests the RAM and ROM. You will see various patterns on screen. Afterwards you should see
IROM OK,
IRAM OK,
HP48GX OK
The self test will continue repeatedly until you perform a
System Halt
  1. Press and HOLD the [ON] key
  2. Press and release the "C" key
  3. Release the [ON] key.
The empty stack should appear.

If you do not see IROM OK and IRAM OK, the calculator requires service.

If the above procedure is successful, you may want
to test the keyboard.
  1. Turn calculator on
  2. Press and HOLD the [ON] key
  3. Press and release the "D" key.
  4. Release the [ON] key
  5. Press and release the "E" key. KBD 1 should appear on the top left corner of the screen.
  6. Starting at the upper left corner of the keyboard, and moving Left to right, press every key in sequence. If you follow the sequence and the keys are functioning properly you should hear a hight pitch sound at each press.
  7. If everything is OK, when you press the last key (+) the screen displays KBD 1 OK.
To exit the keyboard test proceed as described above under System Halt.

If you follow the proper sequence and a hexadecimal number appears after pressing a key, the calculator requires service.
Hope it helps.

Feb 05, 2009 | HP 48gx Calculator

1 Answer

Need to know how to pragram my HP48GX Hammer for construction math.


Had someone who knows how to program it for con. math to take it & do it for me. (I hope). Thanks Ronald Greer.

Dec 31, 2008 | Calculators

1 Answer

My HP 48GX with COGO Card is running slow.


Hello,
You should perform the dagnostic tests.

The following procedure valid for the 48G should work for the HP48GX.
Make the calculator perform a
Self test.
  1. Turn calculator on
  2. Press and HOLD the key [ON]
  3. Press and release the key with "E" to its right (the one before last in first row)
  4. Relaese the [ON] key.
It tests the RAM and ROM. You will see various patterns on screen. Afterwards you should see
IROM OK,
IRAM OK,
HP48GX OK
The self test will continue repeatedly until you perform a
System Halt
  1. Press and HOLD the [ON] key
  2. Press and release the "C" key
  3. Release the [ON] key.
The empty stack should appear.

If you do not see IROM OK and IRAM OK, the calculator requires service.

If the above procedure is successful, you may want
to test the keyboard.
  1. Turn calculator on
  2. Press and HOLD the [ON] key
  3. Press and release the "D" key.
  4. Release the [ON] key
  5. Press and release the "E" key. KBD 1 should appear on the top left corner of the screen.
  6. Starting at the upper left corner of the keyboard, and moving Left to right, press every key in sequence. If you follow the sequence and the keys are functioning properly you should hear a hight pitch sound at each press.
  7. If everything is OK, when you press the last key (+) the screen displays KBD 1 OK.
To exit the keyboard test proceed as described above under System Halt.

If you follow the proper sequence and a hexadecimal number appears after pressing a key, the calculator requires service.
Hope it helps.

Nov 12, 2008 | HP 48gx Calculator

1 Answer

ON switch


Hello,
.The selft tests will show you what is wrong, and if the calculator requires repairs.

You can reset the calculator:

Turn the back of the calculator towards you. Extract the top left rubber pad on the back of the calculator and use a paper clip to press the Reset button. If that does not restore the calculator to health, you should perform the dagnostic tests.

The following procedure valid for the 48G should work for the HP48GX.
Make the calculator perform a
Self test.
  1. Turn calculator on
  2. Press and HOLD the key [ON]
  3. Press and release the key with "E" to its right (the one before last in first row)
  4. Relaese the [ON] key.
It tests the RAM and ROM. You will see various patterns on screen. Afterwards you should see
IROM OK,
IRAM OK,
HP48GX OK
The self test will continue repeatedly until you perform a
System Halt
  1. Press and HOLD the [ON] key
  2. Press and release the "C" key
  3. Release the [ON] key.
The empty stack should appear.

If you do not see IROM OK and IRAM OK, the calculator requires service.

If the above procedure is successful, you may want
to test the keyboard.
  1. Turn calculator on
  2. Press and HOLD the [ON] key
  3. Press and release the "D" key.
  4. Release the [ON] key
  5. Press and release the "E" key. KBD 1 should appear on the top left corner of the screen.
  6. Starting at the upper left corner of the keyboard, and moving Left to right, press every key in sequence. If you follow the sequence and the keys are functioning properly you should hear a hight pitch sound at each press.
  7. If everything is OK, when you press the last key (+) the screen displays KBD 1 OK.
To exit the keyboard test proceed as described above under System Halt.

If you follow the proper sequence and a hexadecimal number appears after pressing a key, the calculator requires service.
Hope it helps.

Jul 01, 2008 | HP 48gx Calculator

1 Answer

Fx603p to fx7400p


how to key in sinh in fx603p ?

Feb 09, 2008 | Casio Calculators

Not finding what you are looking for?
HP 48gx Calculator Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Calculators Experts

Lawrence Oravetz

Level 3 Expert

7686 Answers

David Payne
David Payne

Level 3 Expert

13437 Answers

Ngoro
Ngoro

Level 3 Expert

1111 Answers

Are you a HP Calculator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...