I'm pretty sure that there are RCA jacks in the back of the unit for the aux input. Don't have my owners manual so can't really say, but if there is an aux input, there is sure to be some RCA jacks in the back. So if you take the stereo out, look for those jacks then attach a 1/8 "Y" connector. Then route that wire to the front. Then you'll have something to connect your mp3 player to. =)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your audio system has aux input then buy a compactible cable to connect your 3.5mm output oprt to the audio systems aux input. then change the audio source is Aux input in your audio system and play the audio using our ipod.
You need to get the Direct Cable for iPod® (CA-DC300U) from panasonic. This allows you to plug in and control your ipod from your headunit. There is also the expansion module (CY-EM100U), however I am not sure if this is necessary if you have the Direct Cable. The Direct Cable might plug directly into the back of the headunit without the need for the expansion module. Check with the company before purchasing one or both. If the direct cable requires the expansion module, then get both, however, I think the direct cable works independent from the expansion module. Again, contact the company about this. The expansion module also lets you plug your ipod as well as other devices into your headunit, however I don't think it allows you to control them via the unit. I think if you want to control the ipod from your headunit, you just need the Direct Cable for Ipod®.
not sure if my last post was posted, but my unit has the same problem. It can randomly shut off after 2, 5 or 10 min. I have read somewhere, that it might be the fan on the back of the unit. still looking for solution....
It could be the dimmer - Press and hold [MENU] (DIM) for more than
2 seconds to change dimmer level setting.
I suppose you tried playing with the display button as well.
Besides these, there's also a decent chance that either the display lamp is not getting power, or that it's out.
That takes taking the thing apart, and you probably don't want to do that. Better take it to a repair shop in that case.