Question about Zanussi F1045W Front Load Washer
I have a Zanussi WDA1055W washer/dryer. I never use the dryer programmes. On a wash programme It seems to be spinning only when it feels like it! Sometimes it will drain and spin fine on one programme, then decide not to bother the next time! So i have to wait for the wash cycle to finish then set it to the drain cycle then set it onto a spin. It does not seem to be able to just follow a whole programme through! Any ideas?
The water should only be filling up to approc 2in above the drum bottom...........look inside when its filling..........if its filling to nearly the bottom of the door you either have a faulty pressure switch or grit/dirt in the internal filter.......as a result the machine will not spin if there is too much weight in the drum
Posted on Mar 31, 2009
Tips for a great answer:
Jun 30, 2014 | Zanussi ZWD12270 Front Load Washer / Dryer
Mar 03, 2011 | Zanussi ZWD1680W Front Load Washer / Dryer
Oct 24, 2010 | Zanussi WDA1055W Front Load Washer / Dryer
Oct 20, 2010 | Zanussi WDA1055W Front Load Washer / Dryer
Jul 20, 2010 | Zanussi ZWF1430W Front Load Washer
Jan 13, 2010 | Zanussi WJD1257W Front Load Washer
Nov 18, 2009 | Zanussi WDA1055W Front Load Washer / Dryer
Jan 21, 2009 | Zanussi WDA1055W Front Load Washer / Dryer
Jan 19, 2009 | Zanussi WDA1055W Front Load Washer / Dryer
223 people viewed this question
Usually answered in minutes!