Question about Xerox Phaser 7700 Laser Printer

1 Answer

7700 MAINTAINANCE ENGINEER LONDON

Hi I am looking for some one to maintain my 7700gx in the south London area.  Xerox will no longer support the machine  Any Ideas 
Ta

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Do what I did and but another inexpensive 7700 on ebay...they are cheap!

Posted on Nov 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Xerox C2424 error code 19,003.48 and 07,010.43


for error code 07,010.43

Access the power switch by opening the Interface Cover on the right side of the machine.
c2424-interface-cov-open.jpg
  1. Power OFF the machine. c2424-pwr-sw-arrow.jpg
click on this:
for maintainance
http://www.office.xerox.com/userdoc/C2424/C2424_Web/pdfs/en/ug_maintenance.pdf

for troubleshooting:

http://www.office.xerox.com/userdoc/C2424/C2424_Web/pdfs/en/ug_trouble.pdf

Jan 30, 2008 | Printers & Copiers

1 Answer

Duplex printing in xerox 7700gx


Try add a printer and add a generic printer driver ( deskjet 990c), and try the Duplex printing. It should work.

Aug 03, 2009 | Xerox Phaser 7700 Laser Printer

1 Answer

Printer error - call for service, 9-911 what does this mean?


It will be best to run diagnostic tests on the printer and especially the electronics before coming to any conclusions. My first guess would be that some part of the memory went south. The test procedures are in the service manual which can be downloaded at: www.lpscomputer.com/ec/Phaser_7700_Service_Manual.pdf

Apr 16, 2009 | Xerox Tektronix Phaser 7700GX Laser...

1 Answer

Hi, I have the Xerox Phaser 7700GX. I have a scrolling message that says 'cartridge 1,2,3,4 is missing' and tray 4 is missing. I've tried troubleshooting through Xerox'x support site - where I've switched...


That really sounds like corrupted software
Go to Xerox.com
Click "support and drivers"
Enter "phaser 7700" then click the orange "search"
Then "drivers and downloads"
Scroll to "firmware update"
Download it and follow the instructions to load your printer software.
That should correct your problem.

Apr 30, 2008 | Printers & Copiers

1 Answer

Phaser 6250 service manual


Hi I live near north london give me a call no 07764303923 i have a collection of tech manuals canon,apple G5+i book,hp,
Thank You

Feb 24, 2008 | Xerox Phaser 6250DP Laser Printer

2 Answers

Phaser 7700 Accumulator Belt Replaced, upon startup there is an error


POSSIBILITIES

Problem:
1st BTR Contact Failure or 1st BTR Retract Failure Message is displayed after replacing the Accumulator Belt Cause:
A Phaser 7700 Accumulator Belt was installed in a Phaser 7750. The Phaser 7700 Accumulator Belt does not have retractable 1st Bias Transfer Rollers; so these errors will be reported if one is installed in a Phaser 7750 printer. Solution: thumbsup.gif Fixed! thumbsdn.gif Did not fix. Remove the Phaser 7700 Accumulator Belt and install a Phaser 7750 Accumulator Belt. TRY FIRST (Solutions without parts):
1. Check that all shipping restraits have been removed.



TROUBLESHOOTING TIPS AND HINTS:
1. Test the 1st BTR motor in diagnostics to verify proper operation. 2. Test the 1st BTR sensor in diagnostics, then run the 1st BTR motor test and recheck the 1st BTR sensor. Sensor state should alternate between L and H. The sensor is part of the accumulator belt.

PARTS:Parts are listed in the order of highest probability for repair.
NUMBER QTY DESCRIPTION
116177400 1 *KIT IBT - UNIT



REPAIR/INSPECT/PREVENT PROCEDURE:
1. Clean feed rollers, exit rollers and guides; replace if
necessary.
2. Clean feed rollers and exit rollers only when dust or
debris is visible.
3. Remove and clean all paper trays.
4. Clean the Laser Scanner Unit window.
5. Inspect the image density sensors; clean if necessary.
6. Inspect the accumulator belt home sensor; clean if
necessary.
7. Inspect the fuser assembly; clean if necessary.
8. Print the Error Log, diagnose and repair any problems as
indicated.
9. Print the Usage Profile, diagnose and repair any
problems as indicated.
10. Check version of all installed firmware; as
appropriate, install the latest version of firmware.
11. Check cleanliness of interior and exterior of printer,
including fans; if necessary, clean (dust or vacuum) these
areas.
Problem:
1st BTR Contact Failure or 1st BTR Retract Failure Message is displayed after replacing the Accumulator Belt

Jan 25, 2008 | Tektronix Phaser 860DP Thermal Printer

1 Answer

Phaser 7700GX Color Printer prints wrinkled pages!


when this occurs the problem is most of the time with the transport roller, fuser / fixing assembly roller.question is the image still toner only and not fused to the paper.
In these areas there is offen a jammed and not removed piece of paper dislodged in the paper path or jammed in the fuser or the transfer rollers teflon coating has perished inspect the areas carefully and remove any found if the unit still is faulty (fanning of paper the fuser would be the first to be replaced are past there usable life) if so then Post a reply

Sep 10, 2007 | Xerox Phaser 7700 Laser Printer

Not finding what you are looking for?
Xerox Phaser 7700 Laser Printer Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

Philip Hughes

Level 2 Expert

63 Answers

Are you a Xerox Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...