Question about Konica Minolta bizhub 350 All-In-One Laser Printer

1 Answer

In minolta bizhub 350 pc drum change

Plz change
pc drum

Posted by on

  • elaineprejea Mar 31, 2009

    Please chang PC Drum on Bizhub 200

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Two Options:
1) Reset the PC/life; I/C Life and DV counter and run F8.
2) The same than before but change the PC drum.

by : George Rivas ( OSI )

Posted on Apr 15, 2009

  • xolisile
    xolisile Jan 16, 2014

    what if the machine say pls change pc drum what is that

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi. i have bizhub 350. my problem is the toner hopper is not spinning/rotating. hv already changed the developer,the toner replenishing box and the drum assy, whole unit. what seems to be my problem here....


Sir, the toner bottle motor assy. needs to be replaced. will take quite a bit of work to get to, recommended a service tech qualified on Biz hub 350. This series is well known for the toner bottle assy. fault as is the di3510 series prior to the Bizhub 200/300 series.

Mar 25, 2015 | Minolta bizhub 350 Black and White Copier

1 Answer

Need to replace the drum on a minolta bizhub 350 copier


First get into service mode. Utility/Counter then meter count then check details. Then Stop 00 stop 01. Counters. Clear Drum and Developer. Then touch end do not exit all the way out of service mode. Turn off the machine using the main on/off rear of machine left hand side. Then remove the image cart. and replace the drum and developer. then turn machine on reenter service mode. Run F-8 found under Function. Do not print copy or allow fax to print before this is done. Or you will have to replace the developer again. So remove network cable and fax line if machine is as printer and FAX. after powering off

Jan 15, 2014 | Minolta bizhub 350 Black and White Copier

1 Answer

Change pc drum


Press bediener - details - stop 00 - stop 01 - enter 00000000 then touch end. Go to Counter- Counter Reset (higlight the six box) - function - f8 - press the start key (wait) go back to counter - pm - highlight ic life or pc life - press cancel button.
Hope it can help you.

May 29, 2013 | Minolta bizhub 350 Black and White Copier

1 Answer

Minolta bizhub 164 black and white, change drum


Remove the imaging unit from the copier. Unscrew the sides. Remove the old drum. Replace with the new one. Clean the blade and everything of imaging unit including the waste or recycle part.

Jan 23, 2012 | Minolta bizhub 350 Black and White Copier

1 Answer

NEED TO RESET THE DRUM LIFE AND STARTER . NEED THE PROCEDURE TO RESET THESE WARNINGS


Unfortunately The minds at Konica Minolta have figured out how to make the machine Inoperable if you reset the drum and or developer counters, the only way to reset the "change drum" condition on a Biz 350 is to replace the drum AND the developer and calibrate them both when you do it automatically resets the counters... sorry.

Sep 29, 2010 | Konica Minolta bizhub 350 All-In-One Laser...

2 Answers

Konica/Minolta biz 350 C2557 after replacing DV unit and drum F8


tha minolta di3510 developer unit looks the same as the unit for the konica minolta bizhub 350 but the toner sensor in the minolta unit uses a different voltage range for the toner sensor and it will throw this code make sure you have the correct unit for this machine also you can try this
go back into tech rep mode and change these settings:
select tech rep choice mode
select printer tab
select atdc sensor gain
set the value to about 165
then back all the way out to the ready screen and power the machine off then back on and replenish toner in the user management screen.

Apr 22, 2009 | Konica Minolta bizhub 250 All-In-One Laser...

4 Answers

Konica Bizhub Password Reset


You can try the default admin password which is 12345678

Mar 24, 2009 | Konica Minolta bizhub 350 All-In-One Laser...

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

3,292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...