Question about Akai Projection Televisions
When i turn "on" my tv 1 or 2 mnts then rigth back "off " by it self
The problem is the light tunnel is collapsing. This is a VERY common issue with the Samsung/Akai DLP TV's. It is four mirrors used to transfer the light after it passes the color wheel to the DMD board. When part of it collapses the grey bar that you are seeing is the end result. This is a part that usually requires a technician to replace as there is a little tear down of the light engine itself and you would be handling delicate parts. The part number for the tunnel assembly is BP96-01961A and I have included a link so you can purchase it through the Samsung website. Please take a few moments to rate my answer. Thanks..
Posted on Nov 21, 2009
Testimonial: "Great solution and response time!! Thanks!"
AKAI PT50DL14XSMS - LAMP INDICATOR (GREEN) FLASHES ABOUT 20 TIMES - CAN HEAR FAN RUNNING AND LOOKING THRU LAMP GRILLES CAN SEE BRIGHT BULB LITE - NO PICTURE COMES ON - AFTER ABOUT 30 SECONDS EVRYTHING SHUTS DOWN
Posted on Feb 10, 2011
Please replace lamp in tv to solve the problem.
This has been discussed in chat session a while ago and you found broken lamp in tv.
Posted on Apr 06, 2011
SOURCE: where does the hdmi cable
PT5299HDX/SMS does not have any HDMI input port because it is an old model tv from 2005
It does have Component Video and Composite video inputs but wont have HDMI input as latest TVs have.
Posted on Jul 24, 2011
SOURCE: r tv akai pt4298hdxj/smsmanual
Check for bad connections on your yoke plugs. Each pic tube has its own yoke and will go to the main pc board, It will be a 4 wire plug w red, blue, etc. Two for vertical two for horizontal.
Posted on Nov 12, 2011
Tips for a great answer:
Jul 08, 2013 | Projection Televisions
Apr 06, 2011 | Akai PT50DL24 Television
Nov 20, 2009 | Projection Televisions
Nov 02, 2009 | Akai PT50DL24 Television
Jun 19, 2009 | Akai PT50DL24 Television
Feb 15, 2009 | Akai PT4298HD Rear Projection Television
Jun 28, 2008 | Akai PT50DL24 Television
143 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: