Question about Radio Communications

1 Answer

I have a yaesu ft 890 transeiver

I sent it to someone in perfect working condition and they returned it that it does not turn on now.
You can hear the power relay click when you try to turn the unit on but it does not turn on, what can it be.

Posted by on

  • gccc13 Mar 15, 2009

    My problem with the FT-890. I accidently turned off the power supply befor turning off the 890.

    Now when I turn it on , only the S- meter light comes on, nothing else works.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I've had good luck repairing a FT-890 with the same problem. I repair electronics for a living so there's a very good chance I can help you. Feel free to contact me at 941.748.1941 or at andros2112@yahoo.com.

73s - Steve

Posted on Aug 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

People can hear me but i cant hear them


I'm taking a long shot at checking the receive PL tone. Make sure that it's turned off and try it

Feb 07, 2014 | Yaesu Ft-270r Vhf Ft 270r Ft 270 R

1 Answer

VHF/UHF RF Power falls to Zero when the Auto ATU tunr logo is on the display. When the tunr logo is off the VHF/UHF RF power is only 10 watts on 2M and 3 watts on 70cms. The Yaesu FT 857 D should have no...


Check for open or shorted Veractor diodes and steering diodes there may be no direct interaction as you say but if a diode is open or shorted the RF circuits might still be selected for the higher bands and the lower output power on your vhf/uhf is an indication of this.
If you do not have a service manual you can get one hear, you will likely kneed one
http://www.tradebit.com/filedetail.php/127575994-vertex-yaesu-ft-857-ft-857d-2005-service-repair
Good Luck Best regarsds Falco

Nov 04, 2013 | Yaesu FT-857D transceiver

1 Answer

FT-890AT maunal


here:


Yause FT-890 - Operation Manual

Aug 07, 2012 | Yaesu FT-890AT

1 Answer

Yaesu FT-11R amateur radio squelch problem


It sounds like perhaps you have CTCSS turned on so it's blocking received signals that aren't using sub-audible tones. Make sure the "TSQ" indicator is not showing. Most Yaesu radios have the SQU or "T.SQ" option easily found in their menu structure..

Nov 12, 2009 | Vertex FNB-38, YAESU,FT-11R,FT-41R,FT-51R,...

1 Answer

Service manual/parts list for yaesu ft41r or ft11r


You should be able to get the keypad from Yaesu parts: \
(714)827-7600

You may be able to download the manuals at: www.mods.dk

Sep 02, 2009 | Vertex FNB-33, YAESU,FT-11R,FT-41R,FT-51R,...

1 Answer

Yaesu FT-416 not Transmitting


Check the connection going to the BNC antenna connector from the circuit board. I have seen this wire break before. KB9EKH

Feb 24, 2009 | Vertex FNB-27SM,...

2 Answers

Yaesu FT-26 I got a Yaesu FT-26 that is used. The Problem by it is that its frequence between 140.000 and 148.000, i cant get lower or higher than, I cant even send or recieve anything!!! even when i press...


Same problem for me also blocking on the tape amateur 144/148 MHz not of emission nor of green reception led does not ignite malgres the modifs. Have a solution thank you

Feb 23, 2009 | Vertex FNB-27SM,...

1 Answer

Yaesu ft-815


Double check that "TSQ" is not enabled. In the menus you can fine "SQL" and select the type of squelch. If you have "TSQ" selected you'll only hear signals from radios that a re transmitting the CTCSS tone selected.

Jan 21, 2009 | Vertex FNB-27SM,...

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

1,228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1640 Answers

Brad Brown

Level 3 Expert

13809 Answers

Mike Charette

Level 3 Expert

1769 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...