Question about Harman Kardon AVR 35 Receiver
Receiver can not receive signal from remote control
SOURCE: harman kardon avr-147
Hi Javis. This is perfectly normal ! This mode change is done because the receiver auto detects the digital audio signal and sets the receiver's DSP to decode the signal correctly. You can go into the OSD menu to bypass the auto detection of it, but it's not recommended at all ! You're getting the best audio quality by doing so. Thanks ! cheebster.
Posted on Jul 10, 2007
SOURCE: How to I reset my
I got this from the manual page 43.
Resetting the Remote Memory
As you add components to your home-theater
system, occasionally you may wish to totally
reprogram the remote control without the confusion
of any commands, macros or ”Punch-
Through“ programming that you may have done.
To do this, it is possible to reset the remote to the
original factory defaults and command codes by
following these steps. Note, however, that once
the remote is reset, all commands or codes that
you have entered will be erased and will need to
1. Press any of the Input Selector buttons 4
and the ”O“ button Hat the same time until
the Program/SPL Indicator 2begins to flash
2. Press the ”3“ button Hthree times.
3. The red LED under the Input Selector4
will go out and the Program/SPL Indicator
2will stop flashing and turn green.
4. The Program/SPL Indicator 2will remain
green until the remote is reset. Note that this may
take a while, depending on how many commands
are in the memory and need to be erased.
5. When the Program/SPL Indicator 2goes
out, the remote has been reset to the factory settings.
I am more than happy to answer any other questions you may have about it, please get back to me here, or use the ASK function to go straight to me :) If you are still unsure, have problems, or we need to look at the situation more deeply, then before you give a rating for this advice, hit the ASK button Thanks for using FixYa, If you consider the advice I have given you as sound, a FixYa rating is a great reward for my efforts to help you. Cheers.
Posted on Jun 29, 2008
Yes, although it (AVR) does not support HDMI only component video.
Connect the audio to the receiver and the video directly to the TV if you have inadequate video inputs, or want to take advantage of the HDMI.
Posted on Jan 01, 2010
Testimonial: "cheers, have a good year."
Tips for a great answer:
Apr 08, 2015 | Harman Kardon Audio Players & Recorders
Jan 11, 2015 | Harman Kardon Audio Players & Recorders
Nov 07, 2012 | Audio Players & Recorders
Jan 10, 2011 | Harman Kardon AVR 55 Receiver
Dec 30, 2010 | Harman Kardon AVR 120 Receiver
Apr 10, 2010 | Harman Kardon AVR 35 Receiver
Mar 14, 2010 | Harman Kardon AVR 130 Receiver
Jan 21, 2010 | Harman Kardon AVR 35 Receiver
Dec 19, 2009 | Harman Kardon AVR 35 Receiver
253 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 2 Expert
Level 3 Expert