Question about Proscan PS50700 50" Rear Projection Television

1 Answer

How to remove front screen on proscan projection tv model 50700

Posted by on

  • 5 more comments 
  • kevcarrier Feb 24, 2009

    I cant

  • kevcarrier Feb 24, 2009

    I cant get

  • kevcarrier Feb 24, 2009

    I cant get the

  • kevcarrier Feb 24, 2009

    I cant get the front

  • kevcarrier Feb 24, 2009

    I cant get the front trim

  • kevcarrier Feb 24, 2009

    THANKS. I have used alot of pressure, but fear breaking it if I try too hard

  • valleymutt21 May 11, 2010

    the picture shows this as a table top model, i have a floor standing

    type with the speakers below the screen. the top of the sceen will

    pop off, it's the lower part that won't come off.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

The front trim pops off and behind that there are screws that hold the glass in place. once you remove the screws you can access the screen and clean the tubes.

Posted on Feb 23, 2009

  • Ronnie Houston Feb 24, 2009

    it should just pop loose you might have to pry it a bit

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 50 inch proscan and it just beeps but will not come on how can i fix it


I suspect wrong model number is listed here as this set makes no beep at turn on; older set made around 2000 but if it is your model here is some information to look at.

http://en.allexperts.com/q/TV-VCR-Stereo-1749/Proscan-PS50700-projection-TV.htm


If not this model let me know.

Apr 17, 2012 | Proscan PS50700 50" Rear Projection...

1 Answer

Splitting a RCA Proscan 60 in 2


If there are plastic plugs on the sides of the tv (4) then you can take them out and expose a screw that if taken out will allow for this, otherwise you will have to get creative. good luck

Aug 29, 2009 | Proscan PS52690 52" Rear Projection...

1 Answer

Need to know how to adjust the mirrors on model PS 50700


Hi, you don`t adjust the mirror, you have whats called a pin cushion failure and that means you need to call a tv tech, parts need to be replaced in that circuit and this isn`t something a layperson should attempt, video-tek

Feb 07, 2009 | Proscan PS50700 50" Rear Projection...

2 Answers

TV made a loud popping sound and quit working


Bad IHVT ( transformer ) = Part # 239111 use original only, no cheap subs !...............T.

Oct 02, 2008 | Proscan PS50700 50" Rear Projection...

2 Answers

ProScan Projection TV PS60690 shuts off


It won't turn back on now? Any clicking, indicator lights, etc?....accordianman

Feb 15, 2008 | Proscan PS60690 60" Rear Projection...

1 Answer

Proscan Projection screen warped


Just had mine do this same thing today. Looks like its time for a flat screen. Sucks to spend the money though :(


Feb 03, 2008 | Proscan PS50700 50" Rear Projection...

1 Answer

Proscan PS61700 Beeping no picture


I have a 60in Proscan Projection TV. My picture is out and the TV only beeps.

Brian Allen

Feb 03, 2008 | Proscan PS61700 60 in. Rear Projection...

1 Answer

Tv won't turn on


Usually this problem is caused by part failure on circuit board. Most often in power supply or deflection circuit. You will need test equip. and soldering/desoldering tools to fix this set. Most repair services charge 275.00-475.00 to do this repair on a PS60690. Crate is removable by removing rear cover, disconnecting spk. plugs and keyboard plug. Loosen two screws and whole thing slides out. This can save you service call fee.

Jan 24, 2008 | Proscan PS60690 60" Rear Projection...

1 Answer

Cleaning lens and mirrors


You have to remove the back cover by removing the screws.
Use a microfiber clothe and be gentle.

Jan 20, 2008 | Proscan PS50670 50" Rear Projection...

1 Answer

Convergence Problem w/Proscan PS56670


IN THAT CASE YOU NEED TO REPLACE THE CONVERGENCE STK'S AND SOME TV'S NEED A INTERNAL ADJUSMENT AFTER REPLACE THE CONVERGENCE.

Aug 30, 2006 | Proscan PS56670 56" Rear Projection...

Not finding what you are looking for?
Proscan PS50700 50" Rear Projection Television Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proscan Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

John Miller

Level 2 Expert

253 Answers

Are you a Proscan Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...