Question about U.S. Robotics USR8054 Wireless Router

1 Answer

Cannot connect to the internet with usr8054 and speedstream5200

Usr8054 is on lone, it worked at my nieces.
I have vista

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 174 Answers

First, make sure that cables are properly seated between the phone jack and to your modem, between modem to your router, and between router to your computer
second, access the software for your router
third, configure the wireless settings for your computer and to your router
fourth, check if your wireless settings is configured by disabling the Local Area Connection
if successful unplugged the cable connecting your router to your computer
if unsuccessful please inform me immediately.

Posted on Feb 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Unable to connect to the internet with a new loptop.


is your wifi broadcasting non-secured signal? try protecting your wireless network with a password. In your case, it might be caused by incompatible protocol like 802.11 a/b/g and if your encryption method is incompatible with your router.

Setup your encryption to WAP not WAP2 in your router interface (http;//192.168.1.1) and configure your Vista to connect to your network using that encryption.

Jul 30, 2009 | U.S. Robotics USR8054 Wireless Router

1 Answer

How to enable security on a USR8054?


have you checked the config page and chosen "basic settings"

Jul 08, 2009 | U.S. Robotics (USR8054) Router

1 Answer

My US Robotics USR8054 Wireless Modem stopped working


DHCP may not be working on the router. What IP address does the router give your computers? It should be a 192.168.123.xxx address as default. If you are not getting an IP, then you will have to set a static IP in the range above to connect to the router setup webpage and reenable DHCP.

Mar 07, 2009 | U.S. Robotics USR8054 Wireless Router

1 Answer

Having trouble with usr8054 wireless networking


Yes you should be fine. You have to configure the router before you can access the router, That should be covered in your manual. Also look for a button or switch on your computer that turn your wireless on and off. Make sure this is set to on.

Jan 15, 2009 | U.S. Robotics (USR8054) Router

1 Answer

How do I connect a MaxG wireless router into a SmartAX MT880 DSL modem


  • Connect cable from router to computer ...
  • Connect cable from router (internet port) to the modem ....
  • U will be able to go online ....
  • And after it is done ...u can do the wireless settings ....
  • then connect to network and u will be perfectly able to go online ....

Oct 24, 2008 | U.S. Robotics (USR8054) Router

1 Answer

Usr8054 router losses connection


What you can do to this problem is reflash the firmware of this router, then you need to reset the router by pressing the reset button for 15 seconds and after that reconfigure the settimgs of the router and observe if you still have the problem , hopefully that will fix the issue of your router...

Oct 19, 2008 | U.S. Robotics (USR8054) Router

2 Answers

Wireless doest not work (USR8054)


When you set your security, try using WEP personal as this is the most compatible with your things. Also, it is a good idea to put your computers on the network before you set your password.

Apr 03, 2008 | U.S. Robotics (USR8054) Router

Not finding what you are looking for?
U.S. Robotics USR8054 Wireless Router Logo

Related Topics:

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top U.S. Robotics Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Sunday Ojelabi
Sunday Ojelabi

Level 2 Expert

301 Answers

Are you an U.S. Robotics Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...