Question about Protron PLTV-37 37 in. LCD Television

1 Answer

I can't find were to plug up the cable for cable TV in the back? I lost my manual.

Posted by on

  • My reply is May 11, 2010

    Is there an unused scart socket available?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Its on the left side of the tv if your facing the screen in a little slot, there two different receptors one for digital signal and one for analog.

Posted on Feb 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv starts on ext2 not hdmi


I had Ext at startup for weeks until i realised was a scart cable plugged into back that had'nt been taken out. took it out and rebooted and voila

Oct 29, 2012 | Samsung LE40A557P2CXXE

3 Answers

Picture but no sound on a Toshiba Theaterwide HD tv


Hello Iam wondering have you tried to see under the TV setting Audio and see if the fuctions are muted
or try to unplugged the tv and wait for a few minutes plug it back in.

Also when th tv is turn back on or unplugged and plugged back in see if the power button light
flashes red
And listen to the speakers to see if there is a faint crackling

Sep 12, 2008 | Toshiba TheaterWide 50HP16 50 in. Plasma...

1 Answer

My TV is a Sharp-AQUOS Model # LC52D64U, I have 2 DVD players. SONY DVD player Model #DVP-S530D and MAGNAVOX VIDEO CASSETTE RECORDER/DVD PLAYER MODEL#MWD2206. Thanks Barbara


Sorry about the delay Barbara, I was looking for your clarification comments on the other question page. I didn't realize that you posted this information here in a brand NEW question box. No problem though, this will work just fine too. I will post the information on both question pages so there is absolutely no confusion.

First of all here are the links to each of the USER'S MANUALS for your particular system components:

SHARP AQUOS TV - MODEL # LC52D64U:


http://files.sharpusa.com/Downloads/ForHome/HomeEntertainment/LCDTVs/Manuals/tel_man_LC42_46_52D64U.pdf




SONY DVD PLAYER - MODEL # DVP-S530D:

http://www.docs.sony.com/reflib/docget.asp?manualid=8499&template_id=1&region_id=1&DL
=




MAGNAVOX VCR / DVD PLAYER MODEL # MWD2206:


http://download.m4c.magnavox.com/files/c/cmwd2206_f7/cmwd2206_f7_dfu_aen.pdf




To view the Owner's Manuals with Operating Instructions for each device, just use your mouse to click on the links, which are the underlined and highlighted text just above. Each one of them will open a new web browser page for you automatically and allow you to view the information indicated and the contents of the Owner's Manual.


You did not mention exacly what model of DirecTV receiver you have, so first of all, I will just give you the generic instructions for connecting that device to your TV using an HDMI cable connection.




DIRECTV CONNECTION TO TV


Make sure your TV and DirecTV receiver are turned off before making any cable connections.
Now connect the COAX cable from the satellite antenna to the COAX IN jack on the back of the DirecTV receiver.
Now connect one end of an HDMI cable to the HDMI OUT jack on the back of the DirecTV receiver.
Then connect the other end of that HDMI cable to the HDMI INPUT 5 jack on the back of your TV.
See page 10 of your TV's USER MANUAL for a detailed labelled diagram of the rear input connections on your TV.


Here also is a link to a short video which demonstrates this basic HDMI connection procedure:

http://www.youtube.com/watch?v=J7P-yayRJ6c&NR=1




If you want to test your system at this point, you can. Just plug in the power cords to the DirecTV receiver and your TV, then turn them both on.
In order to see the output from the DirecTV receiver, you will need to select the INPUT 5 input mode using the INPUT button on your TV remote.
See page 11 of the TV manual, button number 7 on the remote control button layout diagram.
Keep pressing the INPUT button repeatedly until you see INPUT 5 on the TV display screen.
At this point you should be getting an input signal from the DirecTV Receiver on your TV.
That completes the DIRECTV to TV connection portion of the system hook-up procedure.



SONY DVD PLAYER CONNECTION TO TV


Your Sony DVD player should have come with an S-VIDEO cable and set of RCA cables (yellow / red / white ) included.
Here is a link to a picture of an S-Video cable in case you need to see one:


http://amazingbestsellerstore.tk/wp-content/uploads/2011/08/31nOF2e5DXL.jpg





And here is a link to a picture of a set of 3 color RCA cables:


http://www.cameratron.co.za/images/productcables/cables/rca%20to%20rca.jpg




Connect one end of the S-VIDEO cable to the S-VIDEO OUT on the back of your SONY DVD player.
See page 8 of the SONY DVD Player manual.
Then connect the other end of the S-VIDEO cable to the S-VIDEO INPUT 2 terminal on the back of your TV.
Now take colored RCA cables and one end of the red and the white cables into the LINE OUT (AUDIO L / R) red and white jacks on the back of you SONY DVD Player.
Then take the other ends of those cables and plug the red and white plugs into the INPUT 2 (AUDIO L / R) red and white jacks on the back of your TV.
In order to see the output from the Sony DVD Player, you will need to select the INPUT 2 input mode using the INPUT button on your TV remote.
See page 11 of the TV manual, button number 7 on the remote control button layout diagram.
Keep pressing the INPUT button repeatedly until you see INPUT 2 on the TV display screen.
At this point you should be getting an input signal from the Sony DVD Player on your TV as long as the DVD player is turned on with a disc inserted.
This completes the SONY DVD PLAYER to TV connection portion of your system hook-up procedure.


MAGNAVOX VCR / DVD PLAYER TO TV CONNECTION

I will describe the connection procedure using the basic 3 color (yellow / red / white) cables which were included with the unit at purchase.
COMPONENT VIDEO cables are also a slightly higher quality option but would have to be purchased by you separately.
Take one end of the 3 color RCA cables and insert the colored plugs into the corresponding colored VIDEO OUT and AUDIO (L / R) OUT connections on the back of the MAGNAVOX VCR / DVD Player.
YELLOW cable plugs into the VIDEO OUT connector.
RED and WHITE cables plug into the AUDIO (L / R) OUT connectors.
See page 7 of the MAGNAVOX manual, METHOD 1.
Now take the other ends of the 3 color RCA cables and plug them into the corresponding colored INPUT 1 connections on the back of your TV.
YELLOW cable plugs into the INPUT 1 - VIDEO IN connector.
RED and WHITE cables plug into the INPUT 1 - AUDIO (L / R) IN connectors.

In order to see the output from the MAGNAVOX VCR / DVD Player, you will need to select the INPUT 1 mode using the INPUT button on your TV remote.
Keep pressing the INPUT button repeatedly until you see INPUT 1 on the TV display screen.
At this point you should be getting an input signal from the MAGNAVOX VCR / DVD Player on your TV as long as the DVD player is turned on with a disc or tape inserted and playing.
This completes the MAGNAVOX VCR / DVD PLAYER to TV connection portion of your system hook-up procedure.
Recording content on the VCR from an outside source will require additional connections which are described in detail on page 6 of the MAGNAVOX manual.

This completes the most basic hook up of your entire system using the cables which were supplied stock with each piece of equipment. As I stated, other options are available for purchase and the instructions for connecting these types of cables are all in the various OWNER'S MANUALS provided above.


Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.

I hope that was helpful to you, good luck and take care.

Joe.

Oct 05, 2011 | Sharp Aquos LC-30HV4U 30 in. LCD HDTV

1 Answer

What's your problem?NO MANUAL FOR 52" sHARP


Sorry about the delay Barbara, I was looking for your clarification comments on the other question page. I didn't realize that you posted this information here in a brand NEW question box. No problem though, this will work just fine too. I will post the information on both question pages so there is absolutely no confusion.

First of all here are the links to each of the USER'S MANUALS for your particular system components:

SHARP AQUOS TV - MODEL # LC52D64U:


http://files.sharpusa.com/Downloads/ForH...




SONY DVD PLAYER - MODEL # DVP-S530D:



http://www.docs.sony.com/reflib/docget.a...





MAGNAVOX VCR / DVD PLAYER MODEL # MWD2206:



http://download.m4c.magnavox.com/files/c...




To view the Owner's Manuals with Operating Instructions for each device, just use your mouse to click on the links, which are the underlined and highlighted text just above. Each one of them will open a new web browser page for you automatically and allow you to view the information indicated and the contents of the Owner's Manual.



You did not mention exacly what model of DirecTV receiver you have, so first of all, I will just give you the generic instructions for connecting that device to your TV using an HDMI cable connection.





DIRECTV CONNECTION TO TV



Make sure your TV and DirecTV receiver are turned off before making any cable connections.

Now connect the COAX cable from the satellite antenna to the COAX IN jack on the back of the DirecTV receiver.

Now connect one end of an HDMI cable to the HDMI OUT jack on the back of the DirecTV receiver.

Then connect the other end of that HDMI cable to the HDMI INPUT 5 jack on the back of your TV.

See page 10 of your TV's USER MANUAL for a detailed labelled diagram of the rear input connections on your TV.



Here also is a link to a short video which demonstrates this basic HDMI connection procedure:


http://www.youtube.com/watch?v=J7P-yayRJ...




If you want to test your system at this point, you can. Just plug in the power cords to the DirecTV receiver and your TV, then turn them both on.

In order to see the output from the DirecTV receiver, you will need to select the INPUT 5 input mode using the INPUT button on your TV remote.

See page 11 of the TV manual, button number 7 on the remote control button layout diagram.

Keep pressing the INPUT button repeatedly until you see INPUT 5 on the TV display screen.

At this point you should be getting an input signal from the DirecTV Receiver on your TV.

That completes the DIRECTV to TV connection portion of the system hook-up procedure.




SONY DVD PLAYER CONNECTION TO TV



Your Sony DVD player should have come with an S-VIDEO cable and set of RCA cables (yellow / red / white ) included.

Here is a link to a picture of an S-Video cable in case you need to see one:



http://amazingbestsellerstore.tk/wp-cont...





And here is a link to a picture of a set of 3 color RCA cables:



http://www.cameratron.co.za/images/produ...




Connect one end of the S-VIDEO cable to the S-VIDEO OUT on the back of your SONY DVD player.

See page 8 of the SONY DVD Player manual.

Then connect the other end of the S-VIDEO cable to the S-VIDEO INPUT 2 terminal on the back of your TV.

Now take colored RCA cables and one end of the red and the white cables into the LINE OUT (AUDIO L / R) red and white jacks on the back of you SONY DVD Player.

Then take the other ends of those cables and plug the red and white plugs into the INPUT 2 (AUDIO L / R) red and white jacks on the back of your TV.

In order to see the output from the Sony DVD Player, you will need to select the INPUT 2 input mode using the INPUT button on your TV remote.

See page 11 of the TV manual, button number 7 on the remote control button layout diagram.

Keep pressing the INPUT button repeatedly until you see INPUT 2 on the TV display screen.

At this point you should be getting an input signal from the Sony DVD Player on your TV as long as the DVD player is turned on with a disc inserted.

This completes the SONY DVD PLAYER to TV connection portion of your system hook-up procedure.



MAGNAVOX VCR / DVD PLAYER TO TV CONNECTION



I will describe the connection procedure using the basic 3 color (yellow / red / white) cables which were included with the unit at purchase.

COMPONENT VIDEO cables are also a slightly higher quality option but would have to be purchased by you separately.

Take one end of the 3 color RCA cables and insert the colored plugs into the corresponding colored VIDEO OUT and AUDIO (L / R) OUT connections on the back of the MAGNAVOX VCR / DVD Player.

YELLOW cable plugs into the VIDEO OUT connector.

RED and WHITE cables plug into the AUDIO (L / R) OUT connectors.

See page 7 of the MAGNAVOX manual, METHOD 1.

Now take the other ends of the 3 color RCA cables and plug them into the corresponding colored INPUT 1 connections on the back of your TV.

YELLOW cable plugs into the INPUT 1 - VIDEO IN connector.

RED and WHITE cables plug into the INPUT 1 - AUDIO (L / R) IN connectors.


In order to see the output from the MAGNAVOX VCR / DVD Player, you will need to select the INPUT 1 mode using the INPUT button on your TV remote.

Keep pressing the INPUT button repeatedly until you see INPUT 1 on the TV display screen.

At this point you should be getting an input signal from the MAGNAVOX VCR / DVD Player on your TV as long as the DVD player is turned on with a disc or tape inserted and playing.

This completes the MAGNAVOX VCR / DVD PLAYER to TV connection portion of your system hook-up procedure.

Recording content on the VCR from an outside source will require additional connections which are described in detail on page 6 of the MAGNAVOX manual.


This completes the most basic hook up of your entire system using the cables which were supplied stock with each piece of equipment. As I stated, other options are available for purchase and the instructions for connecting these types of cables are all in the various OWNER'S MANUALS provided above.



Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.


I hope that was helpful to you, good luck and take care.


Joe.

Oct 04, 2011 | Flat Panel Televisions

1 Answer

Lost manual to connect the right plugs at the back of T.V, & settings to watch T.V. We have DVD but no T.V. Hope you can HELP. ...


Welcome to FixYa.

All you need to check is that the black cable from your antenna (or cable connection) is connected at the back of your TV. There is only one connection that fits to it.

Next is to make sure that your TV is in TV mode. On your remote, find a button that says TV/VIDEO or TV/VCR or INPUT. Press it repeatedly until it is set to TV.

Thank you for using FixYa.

Have a great day.

Sep 11, 2011 | Flat Panel Televisions

1 Answer

I lost my manual and I am trying to connect my DVD player to the set with no luck. I tried hooking it up with just the HDMI cable and I get video but no sound. What can I do? DO I only need to connect a...


Howdy. S-Video will not provide sound either. It and HDMI are just video connections. Find the red and white ended cables and plug them into the inputs closest to the HDMI (or the port labeled HDMI audio) then plug them into the ports on the back of the DVD player. That will put you in business. If you don't have the cable, it can be had at any hardware or department store. Just ask for a red and white audio cable. You almost have it, don't give up:)
Farmerbear at FixYa

Oct 27, 2010 | Envision L32W761 32 in. LCD TV

1 Answer

Looking for manual for Conia plasma c4260w


Look on the jack panel in the rear, if it has no Cable jack then it does not have a tuner. You can use a cable box or a vcr for a tuner if you like, plugged into the Video input.

Mar 14, 2009 | Flat Panel Televisions

1 Answer

I have lost the manual. How do I connect the DVD


The red and white jacks are your left and right audio channels, and the yellow jack is your picture. On the back of the TV, the jacks should be plugged into the audio/video input jacks. You can download a manual at www.service.us.panasonic.com/operman/

Feb 28, 2009 | Panasonic TX-32LXD70 32 in. HD-Ready LCD...

1 Answer

How do I digitally tune my westinghouse TV SK32H24OS. Lost manua


The easiest way might be to unplug the power from the set for several minutes, plug it back in and then run through the setup procedure. You are specifically looking for the channel auto scan function.

Feb 25, 2009 | Westinghouse LTV-32w1 32 in. HD-Ready LCD...

3 Answers

Problem with my ltv-19w6 flat screen TV


hi your tv will  not show picture if there is no cable or antenal connected insted it will show u the blue back baground

Sep 29, 2008 | Westinghouse LTV-19w6 Television

Not finding what you are looking for?
Protron PLTV-37 37 in. LCD Television Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Protron Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you a Protron Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...