Question about GE DBSR453EBWW Electric Dryer

1 Answer

WONT START PRESS THE BUTTON TO START IT WONT START

Posted by on

  • bdurangirl Mar 05, 2009

    dryer wont start, i checked all the wires and fuse. still wont work timer works lights work, just wont start!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,122 Answers

MAIN FUSE UNDER THE TOP PANEL OR BAD DOOR SWITCH,LET ME KNOW-MIKE

Posted on Feb 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a whirlpool duet gas dryer model ggw9200lw1. when i press the start button it clicks once but wont run.


First, check the door switch. Push and release it by hand and you should hear a click. If no sound, replace the door switch with this part.
If the switch is ok, press the cancel button on the machine. Then do this. press and hold the start button for 2 seconds then release wait 2 seconds and press and hold again for 2 seconds continue this pattern until the dryer goes into test mode. You will see all the lights on the control light up. press each button on the control one at a time 3 times each. (Do not press the cancel button) until the dryer begins to run. When the dryer starts to run then press the cancel button. Then your machine should function properly.

Oct 19, 2012 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

1 Answer

LE5200xtwo dryer press start button and it hums but wont spin


http://www.partselect.com/dryer+dryer-wont-start+repair.htm

Apr 17, 2011 | Dryers

1 Answer

Maytag Electric Dryer will not run. Start button sometimes gives a momentary low pitched hum then dies. Motor wont start. Door is closed power is on to unit.


Try this, tape the button down press start and give the drum a push to see if it will spin. If you can jump start it that way, you will need to replace the motor.

Jan 02, 2011 | Dryers

1 Answer

DRYER WONT START


HELLO THERE:
The most common problems with this problem is that there is a fuse that has blown in the dryer or that the door switch has failed and needs to be replaced or the timer switvch or the motor it'sef has went out (NOT LIKLEY) THOUGH
Or THE dryers push start button is faulty
so please check these things out and replace any parts that are found to be defective

Hope this is very helpful for you best regards Mike

Jan 09, 2010 | Whirlpool ET8CHEXSQ Dryer

1 Answer

Press the start button on dryer, it hums but wont turn. With 2 people pressed the start button again, held the door switch, reached in turned the drum, it hummed stopped humming then no more nothing....


Sounds like a weak motor. You'll have to get a new motor installed. They are fairly inexpensive and easy to install yourself on that type of machine if you are handy. Motor is located in the bottom right of the machine, attached to the drum belt through a small pulley underneath the drum next to the motor.

Dec 27, 2009 | Dryers

1 Answer

Beeping start button


possible stuck button on inter face ,, this sounds like kenmore oasis dryer

Oct 28, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Press start button but wont stay on


the switch is fine
the switch in all dryers triggers a relay, that then latches and supplies current to motor and heater, until deactivated by door switch or timer switch
inside the control panel,
trace the wires from the start switch to the first device
c27eaf9.jpgmay be opaque.
ensure that the wires are all connected.
if all are connected replace relay
the local part store will have the relay it is common to most dryers
Cant give exact instructions, no experience with particular model

Aug 06, 2008 | Tricity Bendix TM310W Electric Dryer

Not finding what you are looking for?
GE DBSR453EBWW Electric Dryer Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Melissa Martin
Melissa Martin

Level 3 Expert

676 Answers

ancel1961

Level 1 Expert

16 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...