Question about HP Pavilion a1640n (RC663AA) PC Desktop

1 Answer

For 2nd int. hard drive ? SATA or IDE -HP Media Center a1640n

Want to clone hard drive. 250gb. plan to install 2nd internal hard drive, but don't know whether to buy SATA or IDE.

Posted by on

  • DaRicker Feb 23, 2009

    On this website I found a listing for the computer that listed the components. The primary drive is SATA so I'm pretty sure it'll take SATA for a number 2. thanks again.

    rw


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,226 Answers

Hello,

You can contact your vendor. Or at ebay

( http://computers-networking.shop.ebay.ph/Computers-Networking__W0QQ_sacatZ58058 )

copy an dpaste the link your Internet browser address bar

melnavz

Posted on Feb 23, 2009

  • Emelio Navaja
    Emelio Navaja Feb 23, 2009

    Thank you for using fixya.

    Please use fixya again next time.


    melnavz


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can u use an ide hard drive on a HP Pavilion Media Center a1510n Desktop PC


First you should check your motherboard. If there is IDE connector (maybe there is connected your CD/DVD-ROM) and free position on the cable(maser or slave) you can attach your HDD (check the jumper position. Maybe there are on the label of your HDD). The other solution is to buy a SATA TO IDE cable.

Jul 09, 2012 | HP Pavilion Media Center a1510n PC...

1 Answer

The computer would not boot with a 2nd IDE drive installed


Try setting the jumper on the IDE hard drive to SL (ie slave).

Mar 17, 2012 | HP (SHP) HP DC7100 CMT SRP US HP...

4 Answers

The hard drive in my HP A1000n Computer crashing and is corrupted. How do I know what type hard drive to buy to replace it?


according to the model you have these are the ones that were built with this computer . One of these is in your computer . Which one of these is your drive ? p/n is on right side

PS591-69001 200GB S-ATA hard drive - 7,200 RPM (Seagate, Quiet)

DK322-69001 80GB IDE hard drive - 7200 RPM

DF283-69001 160GB IDE hard drive - 7200 RPM

please issue positive feedback for me

Oct 19, 2010 | HP Pavilion a1000n (PS567AA) PC Desktop

1 Answer

I want install a bigger internal hard drive,whats in it now is a 160 gb ide ultra ata..wshat are my options?


There are a few options. The easiest option is to put in another IDE drive of your choice, along with your existing drive. That way you don't have to re-install or clone your operating system on or to the new drive.

I couldn't tell for sure from reading the info provided by HP whether your motherboard has SATA ports or not. Probably not, due to the age of the computer. Not to worry, if you want to use a SATA drive, just pick up an adapter, such as this:
http://www.compusa.com/applications/SearchTools/item-details.asp?EdpNo=4143846&sku=ULT40322


Sep 19, 2010 | HP Compaq Presario SR1820NX (ER919AA) PC...

1 Answer

Installation of a 2nd hard drive steps & tips


Step 1: Back up and scout around

First, back up your critical files (don't forget your Outlook .PST archive) to optical discs, an external drive, or online storage. Then check whether a CD comes with the drive, providing drive-specific information and general upgrade assistance. It may also later help you copy the contents of one drive to another. Install this software first. Then, power down your PC, unplug all cables, and open the case. Next, ground yourself by touching a metal portion of the chassis.

Look inside—your first task is to determine where your new drive will go. Bays for internal drives are usually located below the wider, front-accessible bays that house CD or DVD drives. If you plan to replace your boot drive with the new drive and don't have an empty bay, your upgrade will involve more steps than we can cover here. But if you're replacing your boot drive and you have an empty bay, follow our steps for adding a second drive. After formatting it, use Norton Ghost (or a similar program) to clone your boot drive's contents to the new drive. Then, revisit steps 3 and 4 to direct your PC to boot from the new drive.

We'll be installing a SATA drive, but the process is similar for the other common drive type, IDE. SATA drives use a thin, seven-pin data cable; IDE drives use a 40-pin ribbon cable that's usually gray. If you're unsure which drive type your PC already has, check its documentation or label. Most PCs more than a year or two old employ IDE hard and optical drives, and don't support SATA unless they have a SATA PCI card installed. More-recent desktops may use (or just support) SATA drives but should support IDE, too.

Tip: If you transfer Windows XP from one drive to another, you may have to reauthorize Windows.

Step 2: Examine data and power connections


Most hard drive kits include a data cable (SATA or IDE, depending on the drive), a power adapter cable (with some SATA drives), and screws. If yours doesn't include cables, you can purchase them separately.

First, the data connection. If you're installing a SATA drive as secondary storage, follow the data cable from your current drive (assuming it's SATA, too) to the other end. See if an unused SATA port lies nearby on the motherboard or an interface card. If you can't find one, consult your PC's documentation.

If you're adding an IDE drive as a second drive, you may be able to connect it to the same data cable as your primary IDE drive, or along with an IDE optical drive. Look for a third, free connector in the middle of the cable that connects your currently installed IDE drive to the motherboard. Note that some older PCs use 40-conductor IDE cables, not the 80-conductor ones current drives require. (Compare your kit cable to the one installed—the 80-conductor variety has much thinner wires.) 80-conductor cables are backward-compatible (both types use the same 40-pin connector), so you can swap out a 40-conductor cable for your kit's 80 if need be. (The "master" drive goes at the end—see step 3.)

Next, consider the power connection. Our SATA drive has a 15-pin SATA power connector. If you already have a SATA drive installed, follow its power cable (the wider of the two connectors) to see if an unused power-supply lead with the same connector is nearby. If so, earmark that lead for your new drive. If it can't reach the empty bay, see if any bundled adapters help.

Some SATA drives also support familiar legacy Molex four-pin power connectors—you can use a Molex or SATA connector. If so, hunt for a free Molex-style lead. Still no match? Then you'll need an adapter, such as a Molex-to-SATA adapter (some kits bundle one), or a Y-adapter that splits a lead in two.

IDE drives are simpler: They always use Molex connectors. You just need a free Molex-style lead (or a Y-splitter).

Step 3: Mount and connect the drive



When installing SATA drives, jumper settings usually aren't an issue. That's not true of IDE, where a jumper indicates whether a drive is a primary ("master") or secondary ("slave") drive. Check its documentation for the proper setting. If your PC has only one IDE hard drive, it's probably set to "master." Assuming you chain another IDE drive off its cable, the new drive should be set to "slave." (You'll later have to change the jumper to "master"—and attach the drive to the cable's end—if you remove the original boot drive and make the new drive the boot drive.) Another option: Set both IDE drives on an 80-conductor cable to the Cable Select (CSEL) jumper setting. The PC will determine master/slave status according to the drives' placement on the cable ("master" at the end, "slave" in the middle).

Next, look at your current hard drive to see if mounting rails are attached to its sides. If so, screw a set onto the new drive (look inside the case for spares), then slide the drive into its bay. Otherwise, screw it directly into the bay. Four screws are sufficient. Usually, the label side points up; mimic the boot drive.

Attach one end of the SATA data cable (which is keyed for correct insertion) to a SATA port on the motherboard or interface card, the other to the drive. IDE data cables, also keyed, usually have a red stripe that lines up with the "pin 1" marking on the drive.

Next, plug the power-supply lead (keyed, too) that you scouted out in step 2 into the drive, including any necessary extender or adapter. Then close the case.

Step 4: Configure the BIOS

Next, boot into your PC's BIOS-setup utility to verify that it recognizes the new drive and positions it correctly in the drive hierarchy. (Check your PC's startup screen to determine which key launches the utility.) Once there, also check that "auto-detect" is selected for the drives, if an option. If the utility lets you select the boot order, give your intended boot drive priority over any other hard drive. This information may be under Boot Options, Boot Order, or Boot Sequence.

Save changes and exit the utility. Your PC will reboot.

Tip: Using a SATA PCI interface card? It may have its own BIOS to check.

Step 5: Partition and format your hard drive


Our PC runs Windows XP, which lets you partition and format drives within Windows. Older Windows versions, such as 98 and Me, make you do this from DOS.

With XP and 2000, though, use Windows' Disk Management utility. Click Start > Control Panel > Administrative Tools > Computer Management, and choose Disk Management from the tree at left. Your new drive should appear, with a black bar indicating it isn't partitioned. Right-click the bar, and choose New Partition to launch the New Partition wizard.



Click Next, and check that Primary Partition is selected; click Next again, to the Specify Partition Size screen (don't change the partition size in the "Partition size in MB" field); and click Next to advance to another screen, on which "Assign the following drive letter" should be selected. Click Next yet again (to the Format Partition screen), and ensure that "Format this partition with the following settings" is selected and that the "File system" drop-down reads "NTFS." Click Next a final time, hit Finish, and formatting begins.

Formatting could take an hour or more, depending on drive capacity. But don't be surprised if your formatted drive has less capacity than the package claims. A 320GB drive, for instance, formats to about 300GB. Drive manufacturers advertise preformatted size, but a portion of the drive is inaccessible.

Dec 27, 2009 | HP Pavilion a1410n (ER890AA) PC Desktop

2 Answers

Changing hard drive


For some strange reason the HP website does not allude to which drive came with your machine. I would assume that information is in your original shipping manifest, but the site does offer a video or instructions on how to change your hard drive, just remember you will have to "clone" your old drive to the new one so all your features will be enabled in your system.

Take a look at this:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph03429&lc=en&dlc=en&cc=us&product=90829

Jul 01, 2009 | HP Media Center PC 873n (P9875A#ABA) PC...

1 Answer

Install sata drives on abit av8 motherboard (vista home)


Right click on my computer, click on manage. Then on Disk Management. See if the drive shows up . If it does you can format it by right clicking and select format.

Sep 28, 2008 | HP xw4600 Workstation Linux Installer...

Not finding what you are looking for?
HP Pavilion a1640n (RC663AA) PC Desktop Logo

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...