Question about Panasonic Phones

4 Answers

Cannot clear old messages from previous phone number

My phone number on my phone was changed their were some numbers on the temporary phone number which I cannot erase. Therefor message light continues to blink.

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi!

Try holding the page button for 5 seconds, that usually clears the blinking light.

You can clear the messages by--

Step 1
Press the menu/ok button ONCE then the up arrow button ONCE.
The display shows MAIN MENU > Answ. Machine
Step 2
Press the MENU/OK button.
Display shows ' AnswMachine>Play
Step 3
Press the MENU/OK button
> the first new message or if non, the first old message will play.
* Use the up or down arrow buttons to adjust the speaker volume.
* Press PHONE button to play message through handset.
Step 4
Press the MENU/OK button then press 'dpwm arrow' or 'up arrow' buttons to control the playback menu:
- Repeat
- Next Message
- Prev. Message
- Delete
- Delete all.

Please tell your model no. for further information.

A Fixya rating would be appreciated if you find this information useful.

Thanks
Rylee

Posted on Feb 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Hqave you unplugged the machine and let it set for about an housr or so? it night help to clear off the old messages

Posted on Feb 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 165 Answers

Go to the inbox option and there you will get the option dele when you will click on any message you just clicvk ok.that will ask you yes or no.you select yes.that will delete the messages.

Posted on Feb 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 13,433 Answers

Whats the model of your panasonic phone? Try unpluging it and remove the battery if it has one, that should reset it, but it depends what model phone you got there?

Posted on Feb 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Home phone KXTGA410 N. How do I get my VM number? or my password number to see who has left me a voicemail?


If you don't remember password for your voce mail, you should go to your call-phone provider's Consumer attencion . They can reset your phone and you can define a new password. Problem is that all your data, even the message you want to listen, will be lost.
So, better try to remember.

May 14, 2015 | Verizon Phones

1 Answer

How do I retrieve recorded messages from an outside phone?


You can access the answering system remotely by dialing your home telephone number from any touch-tone telephone. To remotely access the answering system
Dial your telephone number from any touch-tone telephone. When the answering system answers, enter the two-digit remote access code (19, unless you have changed it). The answering system automatically announces the number of messages (new or old) if there are any. If there are new messages, the answering system automatically begins to play new messages only. -OR If there are no new messages, the answering system automatically begins to play all old messages. You can also enter the remote commands: Play all messages
1 Press to listen to all messages. If there are new messages, the system plays back only the new messages (oldest first). If there are no new messages, the system plays back all old messages (oldest first). Play new messages
2 Press to listen to new messages only. Delete a message 3 Press during message playback to delete the current message. Delete all old messages
3 Press to delete all old messages. Replay current message or previous message
4 To repeat the message currently playing, press 4 after the answering system plays the day and time the current message was received. To listen to the previous message, press 4 while the answering system is playing the day and time the current message was received. Stop
5 Press to stop playback and recording. Play help menu * 5 Press to listen to a list of remote commands. Skip to next message
6 Press during playback to skip the current message and advance to the next message. Record a announcement
7 Press to record a new announcement. Begin speaking after the long beep. Turn system on or off 0 Press to turn the answering system on or off. Exit
8 or hang up Press to end remote access (the call is terminated). 1. 2. 3. 4.5
0 Answering system Remote access Hang up to end the call and save all messages.
NOTES: If you do not enter a valid remote access code, the system answers the call automatically. If the date and time is not set when a message is recorded, the system announces, "Time and date not set" before the answering system announces the number of messages. If there are no messages in the answering system, the system announces, "You have no message." If there are no new messages in the answering system, when you press 2 to play back new messages, the system announces, "You have no new message." If you pause for more than four seconds during remote access, you hear a help menu listing all features and commands. If there is no command for another 20 seconds, the call ends automatically. If the memory is full, the answering system answers after 10 rings and announces, "Memory is full. Enter the remote access code." Enter your remote access code to access the messages and announcements. When the answering system is turned off, the telephone answers after 10 rings and announces, "Please enter your remote access code."

Mar 13, 2015 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Why my uniden dect 6.0 answering phone has announce only and not record message


Check settings. Go to menu / sel button, press once. Scroll down to answering setup. Select. Scroll to record time. Options are announce only, 1 min. Or 4 min. Make selection. You will know your machine is ready to answer and record messages by the change in the LCD display on phone base from "A" (announce only) to a number, designating the number of messages previously saved.

May 11, 2012 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

I need to change voice mail box,, so when a message is left, it calls my cell,, the present ox is calling a previous employeee.. HELP!!


To change your pager notification number, access your voice mailbox, press the admin soft key or 8, then press 6 to open the off prem. message notification, press the admin soft key or 1, choose the type of destination (phone, extension, or pager), press the Chng key to change the destination number, enter in the new telephone number and press the ok soft key.

Sep 03, 2010 | NorStar M7310 Corded Phone

1 Answer

GE answering machine 29870 How do I change the number of rings beffore the machine picks up


SETTING THE RINGS TO ANSWER

The unit announces the rings to answer. To change,
press NEXT or PREVIOUS. To set and go on to the next
item, press SET.
1. Press and release NEXT or PREVIOUS until the unit
announces and displays the correct number of rings
for the answerer to pick up.
2. Once the rings to answer is set, press SET to enter
the incoming message length menu.

Mar 24, 2010 | GE 29870GE1 Corded Phone

1 Answer

Change voice mail message from one person to another person


Step 1 Lift the handset for your telephone and listen for the dial tone. Dial the access code you were given by Verizon when you signed up for residential telephone service. Dialing the access code will call the voicemail system. If you do not have an access code, you will need to call Verizon Customer Servicemag-glass_10x10.gif (see link in Resources).
  • Step 2 Identify the telephone number you are setting up voicemail services for. If you are calling from that telephone number, enter the temporary passcode and then press "#." The temporary passcode is the last 4 digits of your residential telephone number. If you are calling from a different phone, press "*" when the system greeting starts to play, then enter the 10-digit telephone number when prompted. After this, you will be asked to input the temporary passcode.
  • Step 3 Choose a new passcode. The passcode must be from 4 to 8 digits in length. It should be easy for you to remember, but difficult for others to guess. Do not use easy to guess numbers, such as 1234 or 1111. Also do not re-enter the same temporary passcode, since it will be easy for anyone to guess.
  • Step 4 Record your name. Simply say your name, without a long complicated message. This recording is used by the voicemail system to identify you whenever you forward a message to another user. It is not used as the standard greeting when a caller is directed to your voicemail to leave a message.
  • Step 5 Record or change your personal greeting. This greeting is played any time someone reaches your voicemail box. Record a friendly greeting to announce that you are unavailable and will return all calls upon your return.
    Decide if you want to set up a different mailbox for each family member. Verizon residential telephone service allows you to set up multiple mailboxes so that everyone can have his own private message center. Callers who reach voicemail will be prompted to press "1" to leave a message for one person, press "2" for the next person, and so on.
  • Step 6 Hang up the telephone. When you have finished setting up the voicemail system on your Verizon residential phone line, hang up the phone to end the call and exit the voicemail system.
  • Nov 08, 2009 | Uniden Cordless Phone

    1 Answer

    Lucent Parther 18 greeting question:


    Well, which voicemail do you have?

    The answers willbe more clear if we know that.

    It is possible that the old greeting is a different AA number. Some voicemails can have up to 4 AA's.

    Best way is to dial in and go through all AA greetings, both day and night for AA1-4. Listen to the recordings and find the one you need.

    Oct 15, 2009 | AT&T Partner 18 Phone (315805B)

    1 Answer

    How do i record new outgoing message ?


    From your set, dial: -> FEATURE 9 8 1 -or- the voicemail key -> Put your password in (if this is a new install 0 0 0 0 is your temporary password) -> You'll hear your name and how many messages you have -> now press the number 8
    Pressing 8 is to get into the adminsitration of this mailbox, and listen to the prompts. This is where you can change the password, name, greeting. You want to change your primary greeting.
    Good Luck!

    Sep 09, 2009 | Nortel T7316E 2-Line Corded Phone

    1 Answer

    Temporary voicemail replacement.,.."vacation message"


    Do you have a Partner mail vs r5?

    If not, your vociemail does not have this feature.

    Aug 16, 2008 | Avaya Lucent Partner 616 Phone

    4 Answers

    Change my display name


    This is how I did it:
    1. Press the 'Program' button 2. Then dial ** (star, star) 3. Enter the password (usually 1234) 4. Press 'Next' until you get to 'Ext Name' 5. Press 'Enter' 6. You will need to know the Extension Number of you phone, when you find out enter it (eg: 104 or whatever yours is) 7. Press 'Clear' to get rid of the old name then start entering the new name via the number keys. Note: If you keep cycling through the letter on each number you can get to lowercase or uppercase letters. 8. Press 'Enter' then you are all done... pick and hang up the handset.

    Feb 06, 2008 | Panasonic KX-T7630 Corded Phone

    Not finding what you are looking for?
    Phones Logo

    Related Topics:

    24 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Panasonic Phones Experts

    kakima

    Level 3 Expert

    96576 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    guyvstewart

    Level 2 Expert

    82 Answers

    Are you a Panasonic Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...