Question about Yahoo Messenger

1 Answer

I am using Windows vista. every thing just works fine when i log in to my primary account that is administrator but when i switch to some other account on the same computer my yahoo messenger does not works properly i can log into my yahoo account but when i try to chat with my friends i cannot see any thing on the screen of chatting windows how to fix this problem

Posted by on

  • japanu May 10, 2009

    I have the same problem.
    Yahoo messenger is working only on the administrator account on my vista ultimate sistem.
    None of the other users can use it.


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 89 Answers

Ok The Problem is you need to change that programs permissions so that guest have full access only to that program not the whole computer so the computer when log into the other account doesn't block some of the program functions to do this right click on the program you want then say properties then security then you should see something that say admin user etc... click on user then say edit make sure your log in as admin when doing this the check the box that say full control and now click apply close the other box and your done now the program should function right
hope this help doing the following dose not give standards accounts admin privileges it only gives full control to specific programs so that they work properly with out admin rights

Posted on Jul 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I do not know who or what an administrator is how to contact them


That happens when you are running a user account that is not the administrator account. In many ways this is smart because trojans and viruses have the same trouble installing. In schools or office buildings where they want to control who installs what on the computers it makes less problems for an administrator to fix. In your case switch users and log into your administrator account in control panel see if you can give your usual user account administrator privileges, shut down administrator account and log into your usual account and see if it now has administrator privileges in the control panel/user accounts. If not then install software while logged in the administrator account but install for all users from now on. Or you can only use the administrator account and set it up the way you like it (like your regular user account)

Nov 28, 2013 | Microsoft Windows Vista Home Premium with...

1 Answer

I do not have sufficient access to uninstall a specific programme-i must contact my system administrator ???


That happens when you are running a user account that is not the administrator account. In many ways this is smart because trojans and viruses have the same trouble installing. In schools or office buildings where they want to control who installs what on the computers it makes less problems for an administrator to fix. In your case switch users and log into your administrator account in control panel see if you can give your usual user account administrator privileges, shut down administrator account and log into your usual account and see if it now has administrator privileges in the control panel/user accounts. If not then install software while logged in the administrator account but install for all users from now on. Or you can only use the administrator account and set it up the way you like it (like your regular user account)

Nov 28, 2013 | Microsoft Windows Vista Home Premium with...

1 Answer

Administrator password to login not working


Microsoft's latest operating system, Windows 7, and its predecessor, Vista, offer a new layer of security that is different from previous releases, such as XP or 2000.
The earlier Windows versions treated all users as system administrators by default. With Windows Vista and 7, all accounts are treated as limited users.
The User Account Control utility provides elevated permissions when required and prompts users for those permissions.
You can control UAC behavior in Windows 7 so it does not prompt you for these permissions.
Start your computer with Windows 7 and log in as you normally would. Your desktop should appear, and any background applications should be closed.
Click the Windows "Start" orb at the lower left corner of your screen.
Click your account picture at the top right of the menu.
You will be presented with a window that allows you to make changes to your user account.
Click the link that says "Change User Account Control Settings."

Look for the User Account Control options slider.
The default option of User Account Control is to notify you only when programs try to make changes to your computer or you install new programs.
The option directly below that does the same thing but does not dim your desktop.
The "Never Notify" option at the bottom of the list eliminates the prompts for permissions.
Move the slider to the bottom of the options window.
Click "OK."
You may be prompted one last time from User Account Control to confirm your settings and reboot your computer.
or
Log in as an Administrator on Windows 7
If you've recently upgraded from Windows XP to Windows 7, you're probably wondering how to log in as an administrator. In Windows XP, the administrator account was clearly visible from the log-on page, but it's no longer there in Windows 7.

Although there is an administrator account, it must first be enabled with the Windows command prompt before you're able to use it. Enabling the administrator account lets you troubleshoot problems with programs on your computer.

Click on the "Start" button, and then type "command" into the search bar.
Right-click "Command Prompt" when the results appear.
Click "Run as Administrator."
The command prompt opens.

Type "net user administrator /active:yes," excluding the quotation marks.
Hit "Enter."
Click "Start," and then click "Switch User." Click the "Administrator" icon to log in.

Aug 04, 2013 | Computers & Internet

1 Answer

Error Code BIOHD-4


Remove any external devices connected to the computer except the mouse and keyboard to check if it boots normally.

This error can usually be fixed by following the steps below. Doing all this requires a certain level of computer skills. You know yourself best and whether taking the machine to a competent local computer tech (not a BigComputerStore/GeekSquad type of place) is the better solution for you.

1. Log into another user account with administrative privileges. If you neglected to make an extra administrative account do Steps 2-3. Otherwise continue at Step 4. Also see the general information about setting up user accounts in Vista at the end of this post.

2. Boot into Safe Mode. Do this by repeatedly tapping the F8 key as the computer is starting up. This will get you to the right menu where you can use your arrow key to select Safe Mode [enter]. The built-in Administrator account is disabled by default in Vista. However, if no other administrative accounts exist on the system it may be enabled. If it is, you will see an icon for Administrator on the Welcome Screen in Safe Mode. Log into Administrator.

3. If If you don't see the icon for the Administrator account in Safe Mode, then the built-in Administrator account is still disabled and you'll need to do some more work. If you have a Vista installation DVD (not a recovery DVD) you can boot the system with it. Select the default language, then choose "Repair your computer". Then select "Command Prompt". At the command prompt type:

net user administrator /active:yes [enter]

[Note: Do not type the brackets!]

If you don't have a Vista installation DVD (only have a recovery disc), the computer mftr. may have given you the Vista System Repair option (not a System Recovery!) on the diagnostic menu. This diagnostic menu is the same one where you can choose Safe Mode. Or you can make a bootable Vista Repair DVD from the file at this link:

http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/
which will cost you $9.75


Note: All the Neosmart recovery disc downloads are torrent files. There is a good explanation of torrent files at the Neosmart website. You will need a torrent client such as muTorrent to get the files. The torrent client will download the .iso file with which to create the bootable DVD. You will need third-party burning software such as Nero, Roxio, or the free ImgBurn (www.imgburn.com ) to burn the .iso as an image, not as data.

Now remove the rescue CD/DVD you made, reboot the system into Windows, and log into the built-in Administrator account you enabled.

4. Try a System Restore to when things were working. If you can log into your own user account, you're finished. Otherwise continue at Step 5.

5. The critical files are under %systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit elevated and select HKEY_USERS and "load hive" from the menu. Now navigate to:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

There is one line for each profile. If a profile is bad, check:

a) That the key name doesn't end in ".bak" (remove .bak if there)
b) That the RefCount value is 0 (change it if different)
c) That the State value is 0 (change if different)

Make any necessary changes, close Regedit and try to log in as that user.

6. If that doesn't fix your profile, it is corrupted. At that point you should make a new Standard user account and copy your data to it. Do not delete the old account until you have retrieved the data you need!

Once everything is working, log into the extra administrative account you will make per the suggestions below and disable the built-in Administrator account again for security purposes:

Start Orb>Search box>type: cmd
When cmd appears in Results above, right-click it and choose "Run as administrator" [OK]. Now you will get the command prompt. At the command prompt type:

net user administrator /active:no [enter]

Exit the command prompt.

General Recommendations For Setting Up Users In Vista

You absolutely do not want to have only one user account. Like XP and all other modern operating systems, Vista is a multi-user operating system with built-in system accounts such as Administrator, Default, and Guest. These accounts should be left alone as they are part of the operating system structure.

You particularly don't want only one user account with administrative privileges on Vista because the built-in Administrator account (normally only used in emergencies) is disabled by default. If you're running as Administrator for your daily work and that account gets corrupted, things will be Difficult. It isn't impossible to activate the built-in Administrator to rescue things, but it may be more work than you want to do. Best not to get into a bad situation to begin with.

The user account that is for your daily work should be a Standard user, with the extra administrative user (call it something like "CompAdmin" or "Tech" or the like) only there for elevation purposes. Running as a Standard user is best practice for security purposes and will help protect your computer from infection. After you create "CompAdmin", log into it and change your regular user account to Standard. Then log back into your regular account.


Apr 16, 2012 | HP Pavilion Elite m9500f PC Desktop

2 Answers

I'am have trouble get my password to work .I have tryed ever thing My emailaddrees is rebecca2088@luckymail.com


If you have another account on your laptop that has administrator rights, log in into that account and change the password for your account. If you have an administrator account (even if you don't try putting in Administrator and leave password field blank) try using that account to reset the password, otherwise try one of the following:
- see this for XP http://support.microsoft.com/kb/321305
- or this for Vista/Win7 http://windows.microsoft.com/en-us/windows-vista/What-to-do-if-you-forget-your-Windows-password
- or if anything else didn't work you can use third party software from Hiren's Boot CD to reset your login password http://www.hirensbootcd.org/download.html

Mar 31, 2011 | Computers & Internet

3 Answers

How do i login on as administrator on my computer?


Login With the Administrator Account in Windows XP Professional

Click the "Start" menu and then click "Log Off."

Click "Switch User" when the prompt screen opens.

Press "Ctrl," "Alt" and "Delete."

Click on "Administrator" when the "Log on to Windows" screen pops up. Type in the administrator password, if applicable.

Click "OK." You will now be logged in as the administrator.



Log On as An Administrator in Windows Vista

Start your computer and allow it to continue through its startup process. By default your computer will simply load directly to the primary user account (usually the administrator account), but if there are multiple users on the system it will load to the account login screen.

Use the mouse to click on the administrator account from the list of available accounts to log on. This step is only necessary if you've customized Windows Vista with more than one account or you have set the operating system to load the login screen first.

Enter the password required in the password field to log on to the administrator account.

Click the "OK" or "Log On" button once you have entered the password. This button may be labeled differently depending on the version of Windows Vista or any GUI (graphical user interface) changes you may have made.
Log on as an administrator from within the Windows Vista environment by clicking on "Start" and then "Log Off." As soon as you have logged off, you will be returned to the login screen where you can choose the administrator account from the available list.





If this answer helpful please vote me.

Good luck.


Thanks for using FixYa

Jan 17, 2011 | Compaq tc4200 Tablet PC

17 Answers

Forgot asus laptop password Windows vista


Forgetting your Windows administrator login password. With no way to get into the system, you can’t even perform basic maintenance, let alone a thorough tune-up. Formatting is always an option, but we consider that a last resort. (Plus, guess who’s going to have to help reinstall all the programs lost after a wipe?) But all hope is not lost. There are a few ways to actually retrieve a lost Windows account password. Read on, and we’ll show you the light.

1st Method:
The first thing which you check if you forget login password. When we install Windows, it automatically creates an account "Administrator" and sets its password to blank. So if you have forget your user account password then try this:
Start system and when you see Windows Welcome screen / Login screen, press ctrl+alt+del keys twice and it'll show Classic Login box. Now type "Administrator" (without quotes) in Username and leave Password field blank. Now press Enter and you should be able to log in Windows.
Now you can reset your account password from "Control Panel -> User Accounts".
Same thing can be done using Safe Mode. In Safe Mode Windows will show this in-built Administrator account in Login screen.

2th Method:
There are a lot of Windows password revealers and crackers available, but we’ve found that Windows Password Recovery Tool is the most effective.:
Windows Password Recovery Tool is one of the easiest password recovery tools to use. It allows you to reset a user account password, including the Administrator password. It is also a relatively small download.
Windows Password Recovery Tool Service: http://www.windowspasswordsrecovery.com

Feb 19, 2009 | ASUS Eee 4G Notebook

1 Answer

Windows Vista Limited User issue


change the user account to administrator, to unlock privileges.
That should solve your problem, remember to restart the pc so changes are made in the registry

kind regards and please don't forget to rate us

Dec 04, 2008 | Computers & Internet

1 Answer

Unable to log in in my administrative account.


Sounds like a virus......if all the trouble shooting you have done didnt work the only thing you have left is either take it to geeksquad or format the HD and reinstall windows.

Feb 21, 2008 | Microsoft Windows Vista Ultimate Edition

Not finding what you are looking for?
Yahoo Messenger Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yahoo Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Mike

Level 3 Expert

4334 Answers

Barbat Nae
Barbat Nae

Level 3 Expert

508 Answers

Are you a Yahoo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...