Scrren Goes Blank after the booting

Insert your windows disc. make sure your computer boots from the disc drive. Let the disc load. Do a startup repair for Vista/7. For XP let the disc load. Then select REPAIR COMPUTER. The recovery console comes up. Select your drive(C:). Enter password (if there isnt one leave it blank). Type in CHKDSK /R. Let it complete the scan. restart and you should be good. (it will take a while so be patient).

Hello,
Please roll back or restore the system once.
http://technet.microsoft.com/hi-in/library/bb457021%28en-us%29.aspx

http://vlaurie.com/computers2/Articles/windows7-system-restore.htm
http://www.microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx
Hope this helps.

Sounds like a bad piece of ram try replacing your ram. Just because you do not get a post boot beep does not mean your ram is good.

it seems to be your operating system is corrupted it is done by virus try to format ur os drive nad immediately scan ur system with kaspersky antivirus this solves th problem of urs

Remove the BIOS battery and wait for 1/2+ hour, reconnect the battery, boot up and you will be able to get into the BIOS and configure the date & time etc.

My laptop got problem with the interface the screen appear like gray.

Either the backlight lamp or the invertor for it is failing. I suspect the colors and contrast isn't as it once was either. 

does the screen settle down one the machine has booted?

Had similar problem on two Sony laptops I recently supplied, went back for warranty repair one month after purchase. Apprently turned out to be loose ribbon connecter to the panels.

If you need any more help please ask.

Regards
Nick

I just did this for my laptop and it booted right up after I blew out all the dust. Thanks for the tip!

Chris

A bit more info would be good. Did it shut down normal. can you enter bois. any messages???