Question about NorStar Meridian M7310 Phone

2 Answers

I want to be able to just pick up the handset and have it

Go to the first line thats free. right now when i pick up the handset it goes to intercom and i have to manually hit line one or which ever line happens to be free. please help, thanks

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 192 Answers

Depending on the software level, there is a possible chance for this to work...

first question though... can you dial a 9 to get a line out?
If this is possible, that means that we can change the PRIME LINE for a line pool access rather than intercom.

-> Get into system programming
-> get into TERMINALS&SETS and type in your extension
-> enter LINE ACCESS and hit next till you find PRIME LINE it should say I/C (this is intercom)
-> press change till you see PoolA
-> hit next and RLS to end programming.

Now everytime that you pick up your handset, it will pick the first available line out!

Posted on Mar 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 319 Answers

Most office phones require an "outside" line and cannot just pick up a line, Meridians especially. this is a common amongst most office phone system manufacturers that deal with multi-line situations. sorry I cannot help you much further. Ask your IT department (if available) and see if there is a setting in the main system unit that could be programmed to do so. I dont think its possible though.

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My company has an Avaya phone system that uses Partner 18d phones. When you pick out the receiver the phone would go to one of our 4 outside lines, but recently on ext. 10 when you pick up the receiver it...


http://dstech1.com/changing-the-line-that-is-picked-up-when-you-lift-handset/

All releases of Partner
Lets say that you currently pick up line 1 to make an outgoing call, but you want to pick up your last line (in this case we will say we have 6 phone lines).
This feature is called "Auto line select"
To program Auto line select:
From extension 10 or 11:
Press feature 00
LEFT INTERCOM
LEFT INTERCOM
RIGHT INTERCOM
Enter the extension number of the extension you need changed.
press ** (start, star)
Then the order you want the lines to get picked up
Then ** (star, star) when done
When finished, press feature 00 to get out of programming.
So, in this example I would enter my extension number (22) and press ** (star, star) and press line 6, line 5, line 4, line 3, line 2, and line 1. Then I press ** (start, star) to signify that I am done programming Auto Line Select. And feature 00 to get out of programming.
Easy as pie.

Aug 20, 2011 | Avaya 700340193 Corded Phone

1 Answer

How can i do two way on panasonic 5.8ghz


These directions are for the KX-TG5451, KX-TG5452 and KX-TG5453.

If you want to use the intercom feature, you need to know the handset number for the unit you want to contact. The base is zero. The handset number is set when you register the handsets. So to communicate with the base, press Intercom on the handset followed 0. The base will ring until someone presses Call to answer it (or one minute whichever comes first). (Alternatively, you can use the up/down arrows to select H1, H2, H3 or Base. Then press the right arrow key.)

To communicate between two handsets, press Intercom and then 2 (from handset 1 or 3 to connect with handset 2). Again the handset will ring for one minute or until the person with handset 2 answers. (To answer, they can press the phone, speaker or intercom button.)

If someone at the base wants to use the intercom, they need to press Select until the appropriate handset number is displayed. Then press Call.

To transfer a call, press Intercom and then select the desired handset. When the intercom message is picked up, indicate that a call is being transferred and press Off at the handset or base that initially answered the call.

For a conference call, initiate the call then press Intercom and select the handset to join the conversation. Once that person picks up, then press Conf. (I believe that Conf is a softkey so check the display.) This is only possible with the handset. (Another handset can join the conference by pressing the phone or speaker button on that unit.)

The manual for the KXTG5453 is available here: http://service.us.panasonic.com/OPERMANPDF/KXTG5451S.PDF .

If you have a different model of the Panasonic 5.8 GHz phone, please add a comment with the model number and I'll try to give the directions for that unit.

I hope this helps.

Cindy Wells

Aug 11, 2011 | Panasonic KX-TG5453PK 5.8 GHz DSS Cordless...

1 Answer

When I pick up the handset, the intercom picks up. How can I set it to automatically go to next available line to make a call?


This programming needs to be done from Ext 10 or 11

Press Feature 00
Press LEFT intercom TWICE
Press RIGHT intercom ONCE
press the 2 digit extension number you want to set up
PRESS ** ( STAR STAR)
then press the lines in the order you want them to be picked up.
When finished:
PRESS ** (STAR, STAR)
PRESS feature 00 to exit programming.

Done

Oct 11, 2010 | Avaya Corded Phone avaparp18d

1 Answer

Hi: I have a Panasonic KX-T7420 phone. When one of the incoming lines is ringing and I pick up the handset, it picks up the intercom and not the incoming line. Is there a way to get the thing to answer...


There are 2 things that would prevent you from being able to answer a ringing phone by picking up the handset. Your phone has to be ringing, and you need to set preferred line ringing on incoming calls.

The second part is easy. Press PROGRAM 99 and dial 22 STORE on your phone. Now when a call rings on your phone you can pick it up. If you can't, then your phone is not ringing.

Ringing is set in system programming.

Carl

Aug 04, 2010 | Panasonic KX-T7420 Corded Phone

1 Answer

Panasonic kxt7630 button assignment


I've never heard of the ability to reassign an intercom button as it's a fixed feature, but maybe so. Start by assigning the lower left phone button back to CO1 and let's see what happens. WIthout picking up the handset, press PROG the button and dial 0+01 STORE or ENTER.
Pick up the handset and drop it back in the cradle to exit programming.

Did that work? Making button 1 into CO1 will drop the programming from the intercom button and it should default back to intercom.

Carl

Apr 15, 2010 | Panasonic KX-T7630 Corded Phone

1 Answer

Panasonic KX-T7633


You're in luck. Without picking up the handset, press PROGRAM the line 1 button, and dial 0 001 (or 01) and STORE. Press PROGRAM to exit.

If I "guessed" right, on your TDA system, you have line 1 back.

Carl

Sep 17, 2009 | Panasonic KX-T7633 Corded Phone

2 Answers

Nortel M7310 Phone moved to another jack, now no incoming calls


you need to go to your previous location and get the jack number, than go to the new location and get the jack number. now go to the phone system closet and look for these cable numbers on the 66 blocks. Swap the cross connect of the jacks and wallah your phone will be your s again! ldtnsj.com

Jan 20, 2009 | NorStar M7310 Corded Phone

1 Answer

Pickup lines


From intercom 10 or 11.
Feature 00
Left intercom
Left intercom
Right intercom
Enter the extension number in question
press * *
then touch the lines in the order you want to pick up. (line 1 line 2 etc..)
press * *
Press feature 00

Sep 12, 2008 | Avaya 700340193 Corded Phone

2 Answers

Receiver dosen't pick up line that is ringing


go to programming section 5
You want Automatic Line Selection

Press feature00
left intercom button press twice (system program)
press right intercom once (central tel program)
enter # of extension to be programmed (intercom #)
press **
press line buttons in desired order line1 line 2 etc and
end with left intercom then press**
enter feature 00 to exit programming
Dave

Aug 26, 2008 | Avaya Corded Phone avaparp18d

Not finding what you are looking for?
NorStar Meridian M7310 Phone Logo

Related Topics:

611 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Phones Experts

kakima

Level 3 Expert

96627 Answers

dan4261

Level 1 Expert

14 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a NorStar Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...