Question about Acer D-Link 2.4GHz Wireless Router 802.11b (DLINKROUTER)

1 Answer

I have a ACER TRAVEL-MATE 800LCI...with wi-fi wireless...sometimes the wireless works some times it doesnt...what kind of router or what ever will help me get a stronger signal from my house...please help this is a older model acer ...mind you...????????

Posted by on

  • Ved Pradhan May 11, 2010

    you can go ahead and update the drivers for the wireless card..let me know what type of wireless card you have in you computer so that i can send u the link to download and update the drivers..

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 611 Answers

Put up the high level things then you get it very stronger signal now you not get be'coz of the signal low strenght is not there so he can't caught the signal so pls change it in the high level

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW do i use wps on my ipad with WNR2000


Depending on your browser, download or display the pdf of the WNR2000 manual ( http://documentation.netgear.com/wnr2000/enu/202-10397-01/pdfs/FullManual.pdf ). The manual might also be found on the CD that came with the router.Follow instructions Chapter 2 Page 7 to enable/setup WPA2-PSK (AES).Make sure you SAVE/APPLY the settings before proceeding. Follow instructions Chapter 2 Page 17 to Disable Router's PIN. When you do, make sure you leave the box checked to "Keep Existing Wireless Settings".Make sure you SAVE/APPLY the settings before proceeding.Here's a work-around ff the above doesn't fix the issue for you. Sorry I don't have iPad-specific instructions, but I don't have access to an iPad/iPhone at the moment. I've done the following on iPads, iPhones, Android phones and tablets, Windows phones and PC's - it works on virtually all Wi-Fi-capable devices..:
Instead of letting your iPad find the network and trying to connect with the password, try manually creating a new Wi-Fi network connection by typing in your Wi-Fi network name (SSID), selecting WPA2 (AES) encryption and entering the Wi-Fi password your configured in STEP 2 above.Please note: You'll have to forget the Wi-Fi network in your iPad's settings if you keep your Wi-Fi network name (SSID) the same as it is currently.

May 25, 2016 | NetGear WNR2000 Wireless Router

1 Answer

I cannot connect. I keep getting a message "authentication Failed"


Do you connect your PC to router in an administrator role using web browser? Or do you connect some device to Wi-Fi network?

  1. Administrator role: You need to have correct login name and password for admin access. Search in manual or ask Google for default login name and password of your router type. If non-default password is set in the router then you must reset router setting and erase its settings to default (factory) status. You will lose all router configuration but default password is back.
  2. Wi-Fi client role: There are more possibilities why authentication fails in wireless communication. Mentioned error message describes what kind of problem occurred.
    (a) A password you put to client device does not match the wireless network password which is set in router. Your computer, tablet or smartphone WI-Fi interface must have exactly same password as WI-Fi network which is transmitted from router. Check and compare passwords on both sides, in client device and in router.
    (b) Client Wi-Fi interface security (encryption) mode differs from Wi-Fi network encryption used in router. But the same mode must be set on both sides (client and router) for successful connection.
Encryption modes are
  • WPA2 Enterpise
  • WPA2 PSK ("home")
  • WPA Enterprise
  • WPA PSK
  • WEP
  • No encryption (open)
Higher position - better security. Enterprise Wi-Fi modes require security devices like authentication servers, certification authorities etc. They are not used in home networks usually.

Jan 21, 2016 | Routers

1 Answer

My n750db wireless n + router suddenly no wi fi


Unplug the router's AC power adapter for 5 minutes to ensure all capacitors have drained. Plug it back in and the router will reboot.
If your wireless doesn't start working. Log in to your router and check your wireless settings

Aug 18, 2014 | D-Link Wireless N 750 Dual Band Router...

1 Answer

Trying to connect my ipad 2 to wi fi via belkin surf n 300 wireless router put password in and message camesup "unable to join the network "Belkin.361B"


Before you start :
Make Sure the Wireless Switch on your Computer is turned Off (If you are using a laptop to connect to the router )
Make sure that the Light on the Router is Solid Green


Step 1 : connect a computer to the router (Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 in the address bar of Internet Explorer

Step 3 : Once you are at the router setup .. on the left side underneath Wireless you can find Wi-Fi Protected Setup

Click it

Step 4 : If it is asking for a password .. leave the password field blank and click submit

Step 5 : Disable Wi Fi Protected Setup and click apply changes

Step 6 : Now on the left under wireless click Security

Step 7 : If it is asking for a password .. leave the password field blank and click submit

Step 8 : Change the Security mode to WPA-PSK (you can also choose WPA-2 but sometimes it doesnt work )

Step 9 : Type a password (8 Characters , It is Case Sensitive)

Step 10: Click apply Changes

Step 11: On the left , Under Wireless Click Channel and SSiD

Step 12: Change the SSiD to a Different name , Change the Wireless Channel to 11

Step 13:Click Apply Changes

Turn On the Wireless Switch on the Computer (If you are using a Laptop to Connect between router)

Now try to Connect to this new network on both your wireless Computers and Ipad

Let Me Know if it Works

Aug 18, 2011 | Belkin Surf N300 Wireless N Router

1 Answer

Linksys WRT160 router doesn't work


Wi-Fi Protected Setup Button
If you have client devices, such as wireless adapters, that
support Wi-Fi Protected Setup, then you can
use Wi-Fi Protected Setup to automatically
configure wireless security for your wireless
network(s).

To use Wi-Fi Protected Setup, run the Setup
Wizard, or refer to the “Wireless > Basic Wireless
Settings” section of “Chapter 3: Advanced
Configuration".

Wi-Fi Protected Setup LED (Blue/Amber) It
lights up blue when wireless security is
enabled. The LED flashes blue for two
minutes during Wi-Fi Protected Setup.
The LED lights up amber if there is an error
during the Wi‑Fi Protected Setup process. Make
sure the client device supports Wi‑Fi Protected
Setup. Wait until the LED is off, and then try again.
The LED flashes amber when a Wi‑Fi Protected
Setup session is active, and a second session
begins. The Router supports one session at a
time. Wait until the LED is off before starting the
next Wi-Fi Protected Setup session.

Jan 01, 2010 | Linksys WRT160N Wireless Router

2 Answers

I have wireless - router with built in dsl modem DGN2000. Working fine with my desktop but I have just purchased a laptop and have not been able to connect signal to it.


1. Dear! Check your notebook wireless settings and correct it if it is necessory.

2. Chekc your wireless router settings may it need to update for your notebook.

Good Luck

Sep 28, 2009 | Routers

2 Answers

Have a linksys router and adapter not sure how to install, my daughter wants to use her laptop but cant get the internet


Connect your router to computer with ethernet cable.
Then access it with following link.
http://192.168.1.1 or
http://1921.168.0.1

type user name as "admin" and password as "admin" or blank or "password"

Then configure your router as WEP.
Then go to wireless and check that wi fi is enabled.

Then go to wi fi security and add WEP key it is your password to connect your wi fi.
Also enable dhcp if you want get ip auto to computers.
configure your wan settings as your internet service provider like dns ip addrses.
Then save settings and restart the router.

Now go on your laptop first turn the wi fi switch on your laptop .
Then check that your wi fi network adapter driver is proeprly installed.Also check in my network places that your wi fi is enabled.
Then double click on wi fi icon and click on "View wi fi networks."
then connect then enter password which you set in router wep key.

Let me know if you need more assistanse.
Thanks.

Aug 29, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

Wi-fi is not working


If you have not tried another device to make certain that the wi-fi is working, then, you should. Wi-fi's do just drop dead.

Aug 24, 2009 | Routers

2 Answers

Cannot get ipod touch to connect to wireless network


Many Wi-Fi issues can be resolved by doing the following:
Basic troubleshooting
  • Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
  • Verify that you are in range of your Wi-Fi router or base station.
  • Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
  • Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.

Jan 01, 2009 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Acer D-Link 2.4GHz Wireless Router 802.11b (DLINKROUTER) Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you an Acer Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...