Question about Pioneer Car Audio & Video

Open Question

Pioneer cd changer not functioning

I have a Pioneer 25685332 12 disc cd changer. When the magazine is loaded, it goes through its cycle and finishes on disc 1, but shows trac 0. No matter what disc I switch to, it only shows trac 0. Never does anything and after a short time, shows err. If I hit rdm, it shows err immediately.

Posted by on

5 Suggested Answers

  • 2 Answers

SOURCE: pioneer 10 disc changer magazine stuck

i would like to be of assistance but i need to know the which pioneer 10 disc changer it is. send me the information and i may be able to help. thanks

Posted on Nov 26, 2007

  • 33 Answers

SOURCE: Ejecting magazine on Pioneer CDX-fm1257

I have very gently taken a pair of needle nose pliers and grasping the edge of the cartridge that holds the disk carefully work it back into the magazine.

Posted on Jan 09, 2008

SOURCE: chm -s620 cd changer not loading cds

I've got the same problem with my Alpine changer. It seems like a widespread problem, but known cause or solutions.

Posted on May 25, 2008

ohms
  • 1879 Answers

SOURCE: Remove CD Magazine - No power to unit!

u need to re-connect it in order to remove the magazine

Posted on Jun 15, 2008

  • 1 Answer

SOURCE: how do I reset CD changer?

I disconnected the car bettery for a minute, reconnected and was then able to eject the magazine.

Posted on Oct 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need a 6 disc magazine for my Pioneer PD M530 Multi-disc player. Can anyone tell the model number of the magazine so I can locate one for sale


I may have one for sale. Please let me know by visiting my website, audioserviceclinic.com, and contact me there.Thank you.

Dec 24, 2014 | Pioneer Car Audio & Video

2 Answers

Magazine won't eject?


A CD may be stuck between the player unit and the magazine. You can try loading and unloading several times but in extreme cases it is necessary to do some disassembly to get at the disk

Oct 20, 2012 | Clarion Caa-355 6-Disc CD Magazine...

1 Answer

Mercedes cd changer stuck


There may be a CD that did not completely return to its slot in the magazine, for example if power was turned off before the return was completed. Don't know how to fix it. You might power up and try a load-unload cycle to get back to normal.

Sep 12, 2012 | Blaupunkt IDC-A09 5-Disc CD Changer

1 Answer

Pioneer PD-M501 6-CD Player manual and what magazine cartridge


The standard cartridge for the Pioneer PD-M501 is the Pioneer JD-M300 6-disc magazine, and you can find them at Amazon.com for $25 new. The JD-M300 fits a lot of different brands of CD players, not just this particular brand and model. And here's a link to a copy of the owner's manual: http://www.scribd.com/doc/22613342/Pioneer-PD-M601-M551-M501

Mar 26, 2010 | Pioneer PD-M603 6-Disc CD Changer

3 Answers

Eurovox 'Maestro Series' 10 stacker displaying 'E-99'


CD ERROR DISPLAYS
CD Changers
E01:
The disc magazine is not inserted in the cd changer
E02:
No disc is inserted in the disc magazine
E04:
The disc is dirty, or the disc is inserted into the disc magazine
upside down
E99 RESET PROCEDURE:
Remove CD magazine by pressing eject button on changer.
Remove all discs from magazine and re-load empty magazine into
changer. Using the Radio RESET CD system by pressing and
holding the “ON”/”POWER” button for about ten seconds, or in
earlier models the “EJECT/6” button.


FM/RF Remote Controls
E99 RESET PROCEDURE FOR REMOTES:
Remove disc magazine from changer by pressing eject button.
Remove all discs from magazine and re-load empty magazine into
changer. Press RESET button on interface unit
WAIT:
The temperature is exceeding more than 55c(130f) and the cd
changer cannot be operated. When the cd changer cools off, this
wait disappears. When the RESET button on the interface unit is
pressed, this WAIT appears for a few seconds.


IF THESE ERROR CODES STILL KEEP APPEARING
CONTACT YOUR DEALER.

Jun 21, 2009 | iLO CA3000V CD Player

1 Answer

Jensen hd5112 error 2


CD Changer Error Codes: If problems arise during CD changer operation, the following error codes may appear in the display:
ER-1: No magazine loaded.
ER-2: Problem in the disc loading function.
ER-3: Error in the disc loading function.
ER-4: Error in the disc unloading function.
ER-5: Error in the magazine position.
ER-6: Error in the laser pickup position.
ER-7: Error in the laser focus on the disc.

Dec 21, 2008 | Car Audio & Video

1 Answer

Pioneer CDX_1280 12 Disc Changer


hi sounds like dirty laser, or dodgy disc.

check your cd for marks. you could try a cd cleaner disc. this may cause it

other wise its a new laser

Mark
Blue ICE

www.blueice-electronics.co.uk

Jan 04, 2008 | Pioneer CDX-P1280 12-Disc CD Changer

2 Answers

Pioneer 10 disc changer magazine stuck


i would like to be of assistance but i need to know the which pioneer 10 disc changer it is. send me the information and i may be able to help. thanks

Nov 26, 2007 | Pioneer 6CD CHANGER

1 Answer

Ejecting magazine on Pioneer CDX-fm1257


I have very gently taken a pair of needle nose pliers and grasping the edge of the cartridge that holds the disk carefully work it back into the magazine.

Nov 07, 2007 | Pioneer CDX-FM1279 12-Disc CD Changer

1 Answer

Pioneer pd-m406 cd changer magazine style


The Pioneer component 6 CD magazine changers only play normal store bought CDs, not CDs you make yourself.
sorry.

Nov 03, 2007 | Pioneer PD-M406 6-Disc CD Changer

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

Michael Kovalik III
Michael Kovalik III

Level 2 Expert

117 Answers

The Knight
The Knight

Level 3 Expert

71611 Answers

yadayada
yadayada

Level 3 Expert

67800 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...