Question about Bose Lifestyle 48 System

1 Answer

CD/DVD reads no disc after inserting working CD/DVD

After inserting a CD/DVD, it says READING and shortly theafter says no disc. The system worked fine for the past year since the originial installation.

Is there a way to resolve with a master reset code on the control panel? Is there a diagnostic menu on the control panel for troubleshooting?

Thanks.

Posted by on

  • Anonymous Apr 12, 2009

    Says reading, then no disc or invalid format - tried cleaning the lens - no help

  • bonestorm17 May 04, 2009

    I am having the same issues with my Bose system. It wont read the discs and the discs are clean.How do you clean the laser eye?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

More than likely it has dust on the laser eye, it will need to be cleaned

Posted on Feb 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

XDVD710 Whenever I try playing DVDs the screen says bad disc the CD and tuner works fine but with the disc inserted I hear thedisc sspinning with occasional beeps then get the bad disc message and the disc...


The laser unit is most likely faulty and requires replacement. There are usually separate laser diodes for the CD & DVD reading, so the CD might work perfectly while the DVD won't.

Jan 18, 2014 | Televison & Video

1 Answer

JLMS DVD-ROM XJ-HD166 DVD/CD ROM Drive does not acknowledge disc in drive after having the computer set back to factory


Does it not acknowledge dvd disc only or cd or dvd both. If it doesn't read the dvd disc, or able to play dvd disc, but able to exlpore regular cd's, then you have a codec error, and you need to download a dvd codec like powerdvd for it for your system to play dvd disc. Check to see if your dvd-rom drive appears in the "my computer" window, if it is there, but wouldn't be able to play anything, then it could be a driver issue. so make sure in the hardware , the drivers is installed and working properly. If it is working properly and driver is installed, then you got a bad drive, the optical laser lenses isnt reading or the spindle ain't working anymore if you don't hear disc being loaded when inserting the disc.

Jan 30, 2011 | Lite On XJ-HD166S Internal DVD Drive

1 Answer

I have a philips hts6510 home theatre system and when i put a dvd in to play it says no disc


hi,
Normally a dvd player shows the message NO DISC when,
1. The disc inserted is bad.
2 The lase pickup unit inside the dvd lost its reading intensity, dirty lens or the spindle motor damaged .

In your case the second one happened. the intensity of the laser pickup unit has lost or the spindle motor faulty or there is some dust on its lens. just insert a cleaning cd in it for two or three times. then check again is the DVD is reading or not

if the problem remains then you have to check the motor and the laser pickup unit. the lase pickup unit have two laser emitter and receiver in its inside . one for reading and playing DVDs and the other for CD and MP3. also the spindle motor runs in different speed when u insert dvd and cd.

Open the cover of your dvd player and power it on insert an audio cd and watch is it reading or not also notice the speed of the spindling of the cd. if the audio cd reads and play. then the possible problem is the spindle motor

To conform it remove the audio cd and insert a dvd. watch the rotation of the dvd. if it feel very hard to rotate it then, the spindle motor is damaged. if so replace the spindle motor if it runs more the the speed of than audio cd then the laser pickup unit is faulty. Then u have to replace the laser pickup unit.
if you need any further assistance from me , feel free to contact me through fixya.
ok

Jan 16, 2011 | Philips HTS-6500/37 System

2 Answers

"No Disk" message


Your dvd lense need cleaning .
For that buy lense cleaner disk from nearest computer shop then put that disk into cd/dvd rom then play it then it clean dust from lense then you can use it again .
But if still same issue then you need to replace your dvd lense .
Let me know if you need further assistance.
Thanks for using FixYa.

Feb 24, 2010 | Sony Bravia DAV-HDX265 Theater System

1 Answer

Dell Studio 1537 DVD not working


1. clean your cd, then put
2. clean your cd/dvd head
3. scratch cd/dvd shows this type of message

Jun 28, 2009 | Dell Studio 1537 Laptop

1 Answer

No disc present


Try running a cleaner disc in the unit if that doesnt work try the following.

Starting at my computer... Right click on my computer icon.

Go to properties.

Then Hardware tab then go device manager. Right click on cdrom in device list. Select uninstall then reboot the computer. If this doesn't help replacing the unit will be necessary.

Jan 19, 2009 | LG GCC 4480B CD-RW/DVD-ROM Burner

1 Answer

RCA DVD player model DRC105N that won't read discs anymore


If the DVD is not reading any CD, then it is often a lens problem.

If th lens cleaner does not work the unit must be taken apart, to clean the lens pickup with isopropyl alcohol and soft cotton tips.

In some case is necessary to replace the lens pickup, as this is defective.

Nov 26, 2008 | RCA DRC105N DVD Player

1 Answer

Dvd combo not reading/writing any CD


since the device can't identify a disc anymore it is adviseable to get another.


Uzowuanya
e-mail: uzowuanya@yahoo.ca

Feb 13, 2008 | Computers & Internet

1 Answer

Disc reading


hi there

long reading time for cds or dvds only means that there might be dust or residues hindering your cd lens to accurately read the data of the cd/dvd. what you can do is try to clean the lens with a cd cleaner.always check the cd/dvd that you insert are clean and fre of dust . if this still wont work and the player still have the long time to read the cd/dvds, my advise is to bring this to a service center and have this checked out.

hope this helps.

Feb 05, 2008 | Samsung HTQ45 System

1 Answer

My DVD drive reads only Dvd's but doesnot read and CD's?


Two lasers - one for CD one for DVD CD one possibly dirty - so get and run a lazer cleaning disc set and run it or laser burnout -new drive

Jul 04, 2007 | Sony DW-Q28A (DW28Q) DVD±RW Dual...

Not finding what you are looking for?
Bose Lifestyle 48 System Logo

Related Topics:

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Ben Armstrong

Level 2 Expert

334 Answers

Are you a Bose Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...