Question about Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Door locked light flashing when door is closed

My washing machine was in mid cycle when the power went off. when the power went back on the machine lightsn were flashing so we reset the cycle to start again, closed the door then pressed start. the door locked light started flashing and the cycle will now not star despite the door being closed properly please help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Push on the door where the lock is... it may not be fully locked.

Posted on Feb 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cannot unlock door


Try first putting the control on 0 , then unplugging power cord for ten minutes, then plugging it bac.

If this does not work try restarting the cycle at any point and leave the cycle to complete, then you try openoing the door.

Sep 14, 2008 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Indesit IWD7145K Washing Machine Error code F06 flashing on digital display + all program indicator lights. What does this mean. There is no such error code in the troubleshooting section of the manua


F06 - Door lock fault
Issue: Washing machine door cannot be opened or closed/when the door is closed the machine the programme will not start.
Advice: If your washing machine door will not close, please check for any obstructions in the door lock.
OR,
Switch off the device. Disconnect power. Wait about 3 minutes.
Open the door, then close. Reconnect device to the network.
Start device.

Cause: Door lock fails to close / open door lock triac open / closed,
frequency signal fault

Dado

Feb 12, 2015 | Indesit Washing Machines

1 Answer

Samsung wf317aag stopped mid cycle now machine has no power


First, are you sure there is power to the unit? Check the breakers and post back.

Nov 03, 2012 | Samsung WF317AAG Front Load Washer / Dryer

1 Answer

I have a candy go1282 washing machine that has stopped mid cycle and blew the electrics in the house ( not sure if it was the washer or something else that tripped the electrics), now it will not do...


do u still have power to the machine? try a spin cycle? try a rinse cycle if neither works u have a power supply fault.did u wire the door lock correctley?

Jun 28, 2010 | Washing Machines

1 Answer

I have a hotpoint few12 washing machine and have just replaced the interlock door lock as door locked indicator kept flashing even though door was closed,sometimes happened mid cycle,and had to open...


hi
check the spring on the door handle/catch,the easiest way to check this if you close the door and it indicates that the door hasnt locked,push the inner part of the handle towards the machine,if it locks then the spring is worn.(this is more commen than the interlock).

Aug 03, 2009 | Washing Machines

1 Answer

Door light flashes 4 times and can hear 4 clunks?


First measure the door lock, make sure it's fine, then ensure that there's current flowing towards the door lock. if it'll trip all the electricity out you'll need to ru very close inspection or to replace the main circuitboard

Update me about your progress

Jul 24, 2009 | Washing Machines

1 Answer

Hotpoint washer/dryer aqaurius stopd mid cycle with message F-01


f01 is a motor short circuit. you will probably need a new one and maybe the circuit board that powers it if all the lights went out unless the fuse is gone.

Jan 28, 2009 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?
Hotpoint Aquarius WMA42 Front Load Washer Logo

2,777 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...