Question about LG 42PX5D 42 in. Plasma HDTV
Everything seems to work except the picture is very wavy or blotchy on backgrounds and faces
If the Video (Picture/Pix) is gone but you can hear the Audio (sound), then it could mean the YSUS PCB Assembly is gone/kaput/finish. Can replace the PCB, not repair the PCB due to timing circuitry involve. Cost maybe roughly $500 depending where you located. The PCB is located on the left hand side of your TV when you are facing the back (Back open). Might find 3-4 brown flex membrane connecting to the plasma panel. The PCB has a silver or black aluminum heatsink (big) on it.
Posted on Jan 05, 2008
Our LG 50" plasma tv screen went black after a popping noise but still had sound, after great diliberations decided to take the back off and have a peek!
We unplugged the tv and tested the fuses (there were three we could see) one had blown, the one on the left as you look at the back of the tv it also has one above it. We wrote the code/seriel number down and took the fuse to the electrical wholesalers Maplin and bought a pack of 10 fuses for £1.29 replaced the fuse in the tv and everything now fine!!!!!!
Hope this might be of use to anyone whose lost the picture after a loud popping/snacking noise but still has sound.
Posted on Jan 17, 2008
When you boot up your tv for the first time, you get to choose between home and shop-mode.
In your case, he TV is set to "shop-mode".
Then it will go back to factory settings after 5-10 minutes. (so that customers won't mess up the settings all the time)
So change the settings from shop to home, and your problem is fixed!
Posted on Mar 01, 2009
Tips for a great answer:
May 15, 2016 | LG 50PT350 50 in. Plasma TV
Dec 22, 2007 | LG 42PX5D 42 in. Plasma HDTV
Oct 05, 2007 | LG 42PX4DR 42 in. Plasma TV
Mar 21, 2007 | LG 42PX4DR 42 in. Plasma TV
Dec 23, 2006 | LG 42PX4DV 42 in. EDTV-Ready Plasma...
178 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: