Question about iLO 2600 Television

1 Answer

ILO 26HD TV: After playing Playstation, the TV

ILO 26HD TV: After playing Playstation, the TV would not switch back to TV mode. None of the buttons except on/off appear to work. The TV comes on to Composite Mode- No signal. Disconnecting the playstation makes no difference. Reconnecting the cable makes no difference. Unplugging for overnight makes no difference. Is there a reset for the TV?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 1,632 Answers

This is the best solution for your problem as a 40 year experience with wires etc. Go to the source of your cable signal connector . Open it and clean the terminals with emery paper , sand the end of the cable shiny clean from corrosion , get a new barrel connectors with gold terminals if possible lengthen the ends of the cable , insert and tighten good, use thick rg-16 or rg 40 cable with good insulation ends crimped professionally with a crimpier or buy ready made , not from dollar store. Get a gold plated professional splitter if you need one or two , it will cost about 15 or more each . Make the cable runs as short as possible, using the thick good cables. If needed get a signal magnifier. From radio shack or the source etc. Connect them good and tight . Ground the splitters . Problem solved , you will get crystal clear channel 2 to 7 including 3 and 4 . Isolate the TV cable from other cables and power wires. Vitally

Posted on Apr 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Schematic for a ILO-26HD TV TV turns on but will only display Composite1 and No Signal on the screen...and none of the other buttons function


I had the same problem with my unit. The problem is the MAIN Board. I am trying to find a company who sells this so I can replace. When I do I will Post it.

Sep 30, 2010 | iLO 2600 Television

1 Answer

Ilo-26HD televison problems


most of the new TV's use a SCAT plug to allow connection of a PC or laptop. I doubt that this TV has that sophistication. The ISB will not do it and neither will S VIDEO.

As for the cable you could try a male to male plug to mnake a coaxial connection. These TV's were made to a price for walmart and you got what you paid for which was a cheap TV. There was no warranty offered by Walmart for these either

Please rate my help++++Thanks for using FIXYA

Nov 20, 2009 | iLO 2600 Television

1 Answer

I have an ilo 26HD TV and the remote will not change volumn or channel. The buttons on the side of the TV are not functional either.


Try leaving your TV off for a while at the switch and then try again
if nothing call to where you got it from make sure that everything is plugged in too good luck!

Sep 30, 2009 | iLO 3200 32 in. LCD Television

2 Answers

Who is the manufacturer of the ILO 26HD Television?


the manufactured should be on the back of the tv- i have an ilo 27 flat lcd hdtv the name on the back is
SUPERIOR ENTERPRISES
5900 CANOGA AVE
WOODLAND HILLS CA 91367

Mar 15, 2009 | iLO 2600 Television

1 Answer

ILO 26HD


The ilo tv 26HD turns off by its self after about 20 min. of being on.

Jun 10, 2008 | iLO V27DMBX Television

3 Answers

Ilo 26" TV stuck on one station and will not respond to buttons.


all you need to do is buy a control board its a 15 dollar part try shop jimmy .com

Mar 03, 2008 | iLO 2600 Television

1 Answer

ILO-26HD


Some times the mico locks up and if you unplug the tv and wait a few minutes then plug it back in, it will go to the default ant 1 input

Feb 14, 2008 | iLO 2600 Television

3 Answers

Ilo 26hd lcd tv


I unplugged mine over night and plugged it back in this morning but it still will not turn on. It is still in standby mode

Dec 17, 2007 | iLO 2600 Television

2 Answers

ILO-26HD remote problems


I have the same problem.

Nov 06, 2007 | iLO 2600 Television

2 Answers

ILO-26HD


take your tv back to the supplier you bought it from let them rectify the problem.i suppose that your tv is still under warranty.good luck.

Apr 19, 2007 | iLO 2600 Television

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1869 Answers

Are you an iLO Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...