Question about Canon Office Equipment & Supplies

Open Question

The error message is cover is open in canon mx 308

Posted by on

5 Suggested Answers

Healeyman
  • 1198 Answers

SOURCE: Canon Printer Inside Cover Open Error Message

There are sensors that tell if covers are in place. Some sensors are photocells, some are little switches. A tab will interrupt the photocell or push the switch. If the tab has broken off, make a new one. The fun part is finding the sensor.

Posted on Apr 26, 2009

  • 1 Answer

SOURCE: Canon MX 308

Req Service Soon

Posted on Mar 26, 2010

  • 1 Answer

SOURCE: canon mx 308 resetter

westink full

Posted on Apr 12, 2010

pineworks
  • 4041 Answers

SOURCE: How to reset error message 6000, thank you

Hi there it is ink error.
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Start with printer off

  1. Press and hold resume Button (triangle in the circle) and click “Power” button. Green led should be on
  2. While holding the Power button, release the Resume Button.
  3. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
  4. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
  5. Turn off the printer and turn on againPlease come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Posted on Apr 26, 2010

SuperTech-11
  • 1591 Answers

SOURCE: Ink aborber is full I

1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button.
(DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and
Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light
alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4) When the Power LED lights in green, press the Resume/Cancel button 4 times (Waste ink counter resett)

Should fix you right up!

Posted on Jun 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon MX 892 = Printer error has occurred. Turn off power than turn back on. If problem persists see the manual.


The grinding noise would be a clue that something needs to be put right before the reset would work!

Open the cover and check the paper has not jammed or cartridge has not been placed correctly.......remove cartridge and replace! Then turn off power and back on again!

Oct 19, 2014 | Canon PIXMA MX892 multifunction printer

1 Answer

Canon mx 308


If you are looking for the printer driver for the Canon printer then -
You can download the Canon printer drivers from their support WEB site. Please click on this link and select your model printer to download : - http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

Feb 06, 2013 | Canon PIXMA Office Equipment & Supplies

3 Answers

Canon pixma mx 320 error 5800


there are two ways you can remove the error message from your printer..

the first is to reset the printer and the second is to replace the waste ink absorber. If the reset thing did not work for your then you'll be spending money to replace the absorber.

How to reset? follow these steps
1. Turn off your printer
2. Press and hold the STOP/RESET button
3. Press and hold Power ON button
4. While holding the Power ON button, release the STOP/RESET button
5. While holding still the Power ON button, press twice the STOP/RESET button
6. Release the Power ON button
7. Wait until it display an "idle" message. It will take about a minute.
8. When "idle" appear, open the top cover to expose the cartridges.
9. Lift up the cover for cartridge holder and take out both the black and color cartridges
10. Return the cover of cartridge holder and turn off the printer
11. Return the top cover and turn on the printer again
12. After the printer initialize, return the cartridges.

Hope that solve the waste ink absorber in your printer..

Jun 02, 2010 | Canon PIXMA MX320 Color USB InkJet Printer

1 Answer

How to reset error message 6000, thank you


Hi there it is ink error.
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.


Start with printer off
  1. Press and hold resume Button (triangle in the circle) and click “Power” button. Green led should be on
  2. While holding the Power button, release the Resume Button.
  3. Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
  4. Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
  5. Turn off the printer and turn on againPlease come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Nov 07, 2009 | Canon MX300 Office All-In-One Printer

2 Answers

HOW TO RESET CANON MX 308


I found this in the canon troubleshooting guide:

The machine has a built-in ink absorber to hold the ink used during Print Head Cleaning, for example.
This error message indicates that the ink absorber is nearly full.
Press the OK button to cancel the error so you can continue printing.
However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact your Canon service representative as early as possible. (You will need to replace a particular part of the machine.)

I hope this is of some help. Good Luck

Jul 21, 2009 | Office Equipment & Supplies

1 Answer

Canon MX860 Rear Paper Jam


I have a small piece of paper jammed in my Canon MX-860 that Cannot be seen from anywhere. Can you help me find so I can clear it

Jun 27, 2009 | Canon Office Equipment & Supplies

2 Answers

MX 308 do not give the fax receive tone


to enable sound/tone check the settings in the fax section in the software

Feb 26, 2009 | Canon MX300 Office All-In-One Printer

3 Answers

Canon MX 308


How to reset canon MX 308 ??
Error Code 5800
Any Software to reseter this printer?

Feb 24, 2009 | Canon PIXMA MX310 All-In-One Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1812 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...