Question about Crime Stopper Crimestopper EZ-95FM EzeeStart 2-Way FM/FM Remote Start System w/5-Button R

Open Question

Don't know how to program my ezee start remote car starter.

Posted by on

  • james kappers
    james kappers May 11, 2010

    what exactly are you trying to program, tach, doorlocks, etc...?

×

1 Suggested Answer

MECP Guy
  • 344 Answers

SOURCE: Have an ezee start remote starter which, honestly,

take it back to where it was put in, any good installation place will try to fix it for free, at least that's what I do

Posted on Jan 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viper remote start system just installed. When I use the remote to lock the car--there is no longer a chirp noise that confirms I hit the lock key. Thanks, Mary


I don't know which remote starter you have, but I have a Viper 5101. To fix this problem, I started the ignition, then turned it off, leaving the key in the ignition. I pushed the Valet button (it has a blinking blue light, mine is near my rear view mirror) and held it. Then, I pushed it 3 times, then held it down a 4th time. Then, I pressed the lock button once. I pushed the Valet button again to take it out of programming mode, and it worked! I got this sequence of steps from the installation manual online: http://www.scribd.com/doc/45065156/Installation-Viper-5101 Hope that helps!

May 12, 2011 | Viper Remote Start System

1 Answer

Remote car starter worked last week but this week it won't start. Changed battery in the remote and still won't start. It will unlock and lock the doors but just won't start.


It probably needs to be re-programed
I have a viper model 5101 and this is how you program it Hope it helps !



Programming the Viper Remote Starter 5101


Unlock the doors before starting


Push and hold f button for 8-10 seconds until amber light is on solid


Push Remote start button for about 4 seconds till amber light flashes 3 times


Put key in IGN to the on position but don

Jan 05, 2011 | Viper Remote Start System

1 Answer

After install every thing but the starter itself won't start no matter what i do. can anyone help me ? or if you know how to reprogram the remote please show me...


did you follow the procedure for programming the remote starter portion of the unit yet?? We get 20-30 calls a day because people do NOT program the starter to start a certain way. It is specified in the INSTALLATION manual that the unit needs to be programmed before using the remote starter.

Jan 03, 2011 | Autopage C3RS915 SST Remote Car Start...

1 Answer

I need instructions on how to use my viper 5101 remorte starter


go to www.directed.com this is the manufacturer of the viper remote starters, there you should be able to download instructions.

Here is how you program the viper 5101 remote.



Programming the Viper Remote Starter 5101


Unlock the doors before starting


Push and hold f button for 8-10 seconds until amber light is on solid


Push Remote start button for about 4 seconds till amber light flashes 3 times


Put key in IGN to the on position but don

Dec 30, 2010 | Viper 5101 LE 1 Way Car Remote Starter...

1 Answer

I lost my viper remote starter, i already bought a replacement remote, but how do i progam it? I have the basic five button remote, black buttons and silver borders around the whole remote.




Programming the Viper Remote Starter 5101


Unlock the doors before starting


Push and hold f button for 8-10 seconds until amber light is on solid


Push Remote start button for about 4 seconds till amber light flashes 3 times


Put key in IGN to the on position but don

Dec 12, 2010 | Viper 5101 LE 1 Way Car Remote Starter...

1 Answer

Have an ezee start remote starter which, honestly, has never worked 100%. It seems very temperamental; one day it works and the following day it doesn't.


take it back to where it was put in, any good installation place will try to fix it for free, at least that's what I do

Jan 07, 2010 | Crime Stopper Crimestopper EZ-95FM...

3 Answers

How to program marksman car alarm remote


I have a Marksman H50T13 remote starter and had to change the batteries in my remote. I also recently replaced the car battery. My remotes will work now, but my car starts on its own without touching the remotes.

Mar 23, 2009 | Vehicle Security Systems

1 Answer

Ezee start remote stopped working


if you have the manuals look under transmitter programming. if not go to crimestopper.com and look under manuals and you can download one from there and follow the steps into reprogramming the transmitter.

Nov 26, 2008 | Crime Stopper Crimestopper EZ-95FM...

1 Answer

My aunt's car has an ezee start remote for it that stopped working. i replaced the battery but it still isn't working. i believe it needs to be reprogrammed to work again but i can't find any info on how...


go to crimestopper.com and go to manuals and click on the remote start that you have and you can download the manual and follow the transmitter programming.

Nov 26, 2008 | Crime Stopper Crimestopper EZ-95FM...

Not finding what you are looking for?
Crime Stopper Crimestopper EZ-95FM EzeeStart 2-Way FM/FM Remote Start System w/5-Button R Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crime Stopper Vehicle Security Systems Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

John
John

Level 2 Expert

473 Answers

Steve
Steve

Level 3 Expert

688 Answers

Are you a Crime Stopper Vehicle Security System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...