Question about Uniden GMR1038-2 (7 Channels) 2-Way Radio

Open Question

Uniden pmr 885 stuck on receive can tx but will not receive from other handset the receive light is constantly on can't turn it off with the monitor button

Posted by on

2 Suggested Answers

Benimur
  • 6966 Answers

SOURCE: uniden 885 manual needed urgently!

Hi,

For a Uniden GMR885-2CK, pls try here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jul 14, 2008

eradiostore
  • 1641 Answers

SOURCE: I have XTR 446 PMR, 1 unit has become receive only

1) Check your radio to be certain it is programmed the same as the other unit. It is possible the interference eliminator code or the frequency has been changed. 2) Also, it is possible the radio is picking up RF (radio frequency wave) from another radio or device in the area. 3) Or your radio is defective.

Check your programming, reprogram if necessary. Change the radios to another frequency and code to see if you can move away from the issue.

Here is a link to the user manual, which may assist you: http://www.motorola.com/staticfiles/Business/Products/Two-Way%20Radios%20-%20Unlicensed/_Documents/XTR446/Static%20Files/XTR%20Manual%20EU.pdf?localeId=252

Posted on Sep 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Uniden gmr2638_2ck is always stuck on receive. Rd is always showing and static coming from the speaker


Adjust your SQUELCH control or setting so that the noise disappears. The RX indicator will go out.

Mar 01, 2015 | Uniden Radio Communications

1 Answer

UNIDEN TWO WAY RADIOS.ONE TRANSMITS AND RECEIVES THE OTHER DOES NOT.ANY IDEAS OR SUGESTIONS?


Check Batteries swop the batteries around with each set.
Check antennas swop them about.
The set not receiving if possible check for a loose wire inside the set from the antenna connector.
Finally the set you say is not working press the PTT ( Tx button) with both handsets close to each other inches apart . How does the good set react?

Oct 14, 2014 | Uniden Radio Communications

2 Answers

My uniden UH3O5sx is always stuck on receive (rx is always showing) can receive but not transmit


Set up your privacy tones or adjust the squelch level to stop the static and bring the handy out of receive mode. Some models have a busy channel lock out, that if it beleives it hears something it will not let you transmit over the other station.

Oct 04, 2014 | Uniden Radio Communications

1 Answer

Uniden pmr 1188


If they both cover FRS/GMRS frequencies, they should be able to communicate

Mar 03, 2013 | Uniden Radio Communications

1 Answer

How do I turn off the answering machine on my Uniden cordless phone/answerring machine model # EXA 915


To turn the Answering System off, press remote on the handset. The
talk/batt low LED lights green. The current Time and Day Stamp and
number of new messages recorded is announced on the Handset receiver.

Go here to get the complete manual:

http://www.retrevo.com/support/Uniden-EXA915-Telephones-manual/id/471dj482/t/2/

-DB

Aug 14, 2009 | Uniden Lands Phones

1 Answer

Uniden uh064sx-2 2-Way RX Stuck On


Didyou have any luck resolving this issue? We currently have exactly the same problem

Aug 05, 2009 | Uniden GMR1038-2 (7 Channels) 2-Way Radio

1 Answer

"searching" message


the handset is defective, the receiver has failed, no signal triggers the message.

Feb 11, 2009 | Uniden Cordless Phone

1 Answer

Constant beep, channel number and tx flashing


Ok this problem is caused by the spring mic jack
Getting rusty

Oct 26, 2008 | Uniden Atlantis 250 Marine Radio

1 Answer

Bought phone EX18560 Series yesterday. floolowed instructions to charge. Today I came home from work, plugged in telephone jack. phone will not turn on. Attempted to re-register (4X's). Led flashes....


I have two older (2002) model cordless Uniden phones that require the handsets to return to their original factory bases. If they have rested on another Uniden base, even of the same model, there is no dialup tone. Replace to the original base and you should be back in service.

Aug 11, 2008 | Uniden Lands Phones

1 Answer

Uniden 885 manual needed urgently! My kids pressed the buttons and now its on permenantly!


Hi,

For a Uniden GMR885-2CK, pls try here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jul 14, 2008 | Uniden DBGMR-885-2CK 2-Way Radio

Not finding what you are looking for?
Uniden GMR1038-2 (7 Channels) 2-Way Radio Logo

Related Topics:

2,007 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Iron
Iron

Level 3 Expert

3018 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

509 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...