Question about Canon PowerShot SD500 / IXUS 700 Digital Camera

1 Answer

Canon Powershot S2 IS Disassemly guide?

My canon powershot s2 is got the dreaded e18 error. where can i get a disassemly guide for this camera?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 164 Answers

Just Google in internet "Canon S2 CCD repair" and you will find several places where to donwlod a disassembly guide.

Regards

Posted on Jul 22, 2009

1 Suggested Answer

t00nz
  • 4738 Answers

SOURCE: Canon Powershot S2 IS Disassemly guide?

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...

Here are some things that you can do to try to correct it without disassembly. They only seem to work for less than 50% of the lens errors, but if the camera is out of warranty, they're worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won't shut off or take pics. code E18 comes on


Try removing the batteries and cleaning the contacts inside the battery compartment with a cotton swab "dampened" with rubbing alcohol. Also you'll want to clean the battery and charger the same way. Thank you, Dana

Feb 02, 2010 | Canon PowerShot S2 IS Digital Camera

1 Answer

Canon PowerShot S2 IS camera showing code E18


Hello there,
The E18 error is related to the LENS not able to retract fully. If it is still under warranty, I would advise you bring it to the nearest service center. This is to avoid further damages. Otherwise, you can try a few things below.
There are a couple of things you can do.
1. Turn it on and then off. Spray canned air around the lens.
If trick 1 will not work out, try this.
2. Make sure the battery is fully charged. Turn on the camera and then give it a couple of firm whacks on the side. Make sure nothing is blocking the lens and wait for it to fully retract.
Let me know how it goes.

Jan 20, 2010 | Canon PowerShot S2 IS Digital Camera

2 Answers

Canon PowerShot S2 IS 5.0 Megapixel manual


Click Canon Support to download user manual of S2 IS camera.
Thanks.

Sep 02, 2009 | Canon PowerShot S2 IS Digital Camera

1 Answer

Canon powershot s2 is lens won't retract error e18


Try tapping not so gently. other than that it will most likely need to be taken apart and put back together the right way. And any broken parts replaced.

Mar 17, 2009 | Canon PowerShot S2 IS Digital Camera

1 Answer

Canon Powershot S2 IS Disassemly guide?


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...

Here are some things that you can do to try to correct it without disassembly. They only seem to work for less than 50% of the lens errors, but if the camera is out of warranty, they're worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Feb 22, 2009 | Canon PowerShot S2 IS Digital Camera

1 Answer

I have the Canon Power Show S2 IS Digital it's showing E18?


Check out this:     Generic problem for all Digital Cameras E 18 problem

Dec 23, 2008 | Canon PowerShot S2 IS Digital Camera

1 Answer

Camera - Canon Powershot S2 IS (5.0)


This is caused by a bad lens motor, contamination in the transmission, or mechanical damage from dropping. The only fix for this is to have it serviced by Canon or other camera repair facility.

Dec 14, 2008 | Canon PowerShot S2 IS Digital Camera

1 Answer

Canon powershot s2


The E18 error is fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension.

Here's some things that you can do to try to correct it. They only seem to work for about 50% of lens errors, but they're worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Feb 01, 2008 | Canon PowerShot S2 IS Digital Camera

Not finding what you are looking for?
Canon PowerShot SD500 / IXUS 700 Digital Camera Logo

Related Topics:

629 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...