Question about HP DeskJet 920c InkJet Printer

1 Answer

Plugged in and no lights come on

My HP 920 c printer worked at my house just moments before I loaded it into my car. I then transported it to a friend's house, plugged it in and now it won't turn on. I have unplugged and plugged it back in. Taken the cord out of the printer and put it back in. I have tried 4 different outlets, thinking it could be the power coming fromt he wall.
No lights come on. I have read that it could possibly be "offline" but don't know how I would go about fixing this.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 628 Answers

It usually means that the power supply has failed. Perhaps while transporting it, something came loose inside. At any rate, you'll probably need to replace it. Service on inkjet printers isn't cost effective.

Posted on Feb 27, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to load paper for sending only

you old or it, or both, me, im older than dirt.
sending only does that mean faxing/?
HP DesignJet T920 Printer series


ever heard of HP, they have a HUGE web site, one of the biggest on earth really, (for a manufacture..)

its not old, not really? but is ...
here are the books, pick one and read, RTM
T920? i think not.

nah , its the relic 920, HP has like 10,000 models of printers.
its a crazy number, the old ones are all really just trash,
we chuck them , and not wasted hard cash fixing them
when new one is cheaper, say $50?

OK it this old Junker.
its like a YUGO car now, useless.
the word SENDING in your post , confuses me...
why use that word? , you meant print right? i cant print and need to load paper.... ok.
HP has ZERO support on Relics like this but of you learn to google
1st hit shows, the old manual

i dont like that web site but the link is ok
do not download any software to see books , unless at adobe. actual.
the book can be found if you look carefully but most sites
now are infected, and books are the TRAP,

Jun 19, 2017 | HP Office Equipment & Supplies

1 Answer

Reseting ink 920 cartriges

Download the manual for HP 6500,

HP OfficeJet 6500 Wireless Manual.

It is clearly mentioned in it.

-Rate if it helped you.

Apr 10, 2010 | HP Officejet 6500 Wireless All-in-One...

1 Answer

How to refill hp 920 cratridges for office jet 6000

Don't waste your time and money.

Use only factory new ink cartridges from HP.

Apart from voiding any warranty that may be left on the printer, you can end up replacing print heads and getting very poor quality images from your printer.


Feb 01, 2010 | HP Officejet 6000 All-In-One InkJet...

13 Answers

Hp 920 xl ink cartridge filling instructions anyone have them

to refill 920:

1. If you have the plastic cap that covers the 9 mm. hole where you can see the sponge, then tape this cap to the cartidge with scotch tape. If not, use some duct/masking tape to cover the round hole.

2. Use the dry hypodermic needle to find the hole that will be found at the very center of the 920 label. With the needle, pierce the label.

3. Fill the hypodermic needle with 4 cc of ink.

4. Insert the needle 2-3 cm. into the hole made in step 2. Draw out 1 cc of air, then slowly force the 4 cc of ink into the sponge. Use toilet tissue to absorb any ink that might have escaped.

5. Let the catridge stand overnight (if possible) so as to allow the ink to evenly saturate the sponge. If not, insert it into your printer immediately.

Note: If you are going to refill catridges, be certain not to allow the sponge to dry completely. Thus, you might want to do step one immediately and to enclose it in a sealed sandwich bag upon removing an empty catridge from your printer even if you are not going to fill it immediately.

Jul 21, 2009 | HP Officejet 6500 Wireless All-in-One...

1 Answer

Kyocera fs-920 static red light

Your more than likely out of ink.

Apr 16, 2009 | Kyocera FS-920 Laser Printer

Not finding what you are looking for?
HP DeskJet 920c InkJet Printer Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Ben Johnson

Level 3 Expert

685 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides