I just bought this thing and I am reding where it says to read what is on my computer screen but nothing is coming up

Hi,
I share a informative support links please visit and read it... support lexmark com and http://www.lexmark.com/publications/pdfs/lexmarkc720/eng/othrprob.pdf
and Lexmark Printer Support

Thanks,

No it Video problem. It can o in estonia ca 100 € - it call reballing. how old is this laptop?

Take it apart and see if the laser is moving up and down (focusing). If not, then the laser focus servo is bad. After it focuses, the spindle motor should turn and the disc should spin. Remove the spindle lock from the top of the drive case and before it spins quickly place the lock on the disc before it spins to hold the disc in place. If all these processes occur and it still doesn't read, check the lens to see if it's dirty or foggy - clean the lens with "Q" tip and alcohol. if this doesn't work, remove the disk and see if a red beam shines through the lens - if no beam, the laser is bad.

GAME CUBES ************!!!!!!!

bad hard drive. nothing is being read.

I have Windows Vista also, but my installation screen came up. If nothing pops up when you put it in, I would suggest opening "My Computer" and right clicking the icon with FinePix and starting it that way. Or, maybe you could check the Fujifilm site and see if you can download the software off the internet.

Try the following steps:

1) press both the "set" and the triangle button
2) press the triangle button until you get the desired unit of measurement: a) Kilogram, b) stone lbs or c) lbs; and
3) press the "set" button.

Try cleaning the lens q-tip and alcohol (not soaking it)
on the main screen the lil rotating lights if they are not moving you got lens problems

I have an LG Flatron 19" black w1952TQ that I bought on 2 Apr 2008; when it goes into sleep mode, will not recover. Did the online troubleshooting, reseting things, unplugging/replugging all cables, nothing works except restarting the computer, and that only works until it sleeps... Read more

change ide cable 1st ok get back with me thx nick