Question about Ryobi 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned
Need to replace line in trimmer, have misplaced my manual
Or sometimes you unscrew a retaining bolt set into a plastic "lug", the spool drops out, refill t with line, replace it putting line through holes in the spool casing, refit the "lug" and tighten it again. I think I have the manual for this though and if so maybe I can send you a link to images on MSN Homepage to help you..
Posted on Mar 17, 2009
Use . mm monofilament string. Use original
manufacturer's replacement string for best performance.
n Stop the engine and disconnect the spark plug wire.
n Cut one piece of string approximately 7.6m in length.
n Rotate knob on string head until line on knob aligns
with arrows on top of string head.
n Insert one end of string into eyelet located on the
side of the string head and push until string comes
out through eyelet on the other side. Continue to
push string through the string head until the middle
section of the string is inside the string head and
string outside the string head is evenly divided on
n Rotate the knob counterclockwise on the string head
to wind the string. Wind the string until approximately
0cm remains protruding from the string head.
Posted on May 17, 2009
String trimmers are all different in bumphead designs but usually you have to eitherpush down the linespool and turn it ,like a medicine bottle, or there are 2 tangs you have to push in on the sides of the bumphead that you depress to remove the spool so you can replace the line.
Posted on Feb 22, 2009
Tips for a great answer:
on Jul 03, 2010 | Lawn Trimmers & Edgers
Mar 29, 2015 | Ryobi Lawn Trimmers & Edgers
Oct 12, 2014 | Ryobi Lawn Trimmers & Edgers
Jun 02, 2010 | Lawn Trimmers & Edgers
Dec 29, 2009 | Ryobi Lawn Trimmers & Edgers
Jul 09, 2009 | Ryobi 15" Electric Factory Reconditioned...
May 29, 2009 | Ryobi Lawn Trimmers & Edgers
Mar 13, 2009 | Ryobi Lawn Trimmers & Edgers
1,225 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: