Question about iLO 3200 32 in. LCD Television

1 Answer

I took off cable box,turned cable off on tv menu. Put rabbit ears on then went channel set up to auto programming.It asked me, are you sure. I said yes, now my tv is stuck on one channel. How can i solve this.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

I do beleive most tv companies stopped broadcasting over the air. the only way to receive more channels is to take the cable wire that comes out of the wall and then into the tv then auto pragram one more time and see if this helps. One question why would you remove the cable box? if you cancelled cable tv all together you will not get any channels. And like i said before all tv channels are removing there air broadcasting. so rabbit ears are going to be in the past soon. i hope this clarifies the situation.

Posted on Feb 22, 2009

  • donald greth
    donald greth Apr 11, 2016

    its 2016, I still get free over the air tv with rabbit ears

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

On an orion tv, how can i get channels after 13??


In the menu, find antenna/cable. Locate cable and program from there.

Dec 20, 2014 | Orion1934 19" TV

1 Answer

Just purchased an RCA 32" LED TV from K-Mart. Trying to set-up and in auto-scan it will not pick up any channels


It really depends on how your connecting signal. I am not sure about where you are but virtually all cable companies in Canada require the use of the cable box. Searching channels will only check either the analog cable input or rabbit ears. Typically you hook up the cable box via HDMI and set the televsion to that HDMI input and channels are changed on the cable box.

Dec 07, 2014 | RCA Televison & Video

1 Answer

How to make bunny ears work on my 1996 panasonic tv


Rabbit ears will only get channels that are very close or strong--a lot of channels are no longer broadcast in analog over the air---ask your neighbors what they use and consider going to cable or sat.

May 19, 2012 | Televison & Video

1 Answer

Want to set this up without cable. Someone told me to go to "air" mode and add rabbit ears and this will work. I cannot find an air mode on this tv. How do you set this one up with rabbit...


You will once again, purchase a converter box to receive an over the air channel. I don't think you will have to really worry about using an over the air mode on the TV. It may be in the menu, but will work otherwise after being placed on channel 3 to receive through the converter box. The rabbit ears will be connected to the converter box itself.

Feb 13, 2011 | Televison & Video

2 Answers

Finds no channels


It is meant for Rabbit Ears or Outside Antenna Only.....

Jul 24, 2009 | Insignia Digital-to-Analog Converter for...

4 Answers

NO channels now, we had some before!!!!!


Here is how you should have it connected.
1- Antenna (rabbit ears or whatever)
2- Converter box
3- Television

When you turn on the TV and the converter box, go to channel 3 on the TV. You should see the converter box signal there. If you do not see it try channel 4. Bring up the convert box menu and go through the AUTO SEARCH, not manual search. Now your box will search all the frequencies and add any stations that are in your area. Make sure you change channels with the converter box, not the tv. An antenna on the roof will still provide somewhat better range, but even rabbit ears will likely pick up something. If you still get no channels you could be too far away, digital signals have a shorter range than analog signals. You can check your local TV stations website or call to see if they are broadcasting digital yet.

Apr 08, 2009 | RCA Analog (RCA) to Digital (VGA)...

2 Answers

Cannot get local channels back after dropping cable.


Are you positive that your city has not done the Digital Conversion? Some Cities are doing it early before the February deadline. Also make sure you are tuning in to the correct channels. Meaning that if on your Cable Provider ABC was on Channel 3 that does not mean that ABC with still be on Channel 3 after you have your Cable turned off. Most of the Time the Local Stations Tag will let you know what channel its on. It will be something like "KWAS ABC 27" So on your TV you would Tune it to channel 27 to get ABC and the same fore NBC , FOX, CBS , etc...
I hope this helps Take Care =)

Dec 07, 2008 | Televison & Video

1 Answer

Magnavox TB 100 MW9 STB Converter Boxes I'm trying to solve the antenna/rabbit ear connection from this converter box to the t.v. I only get a pic when the rabbit ears are connected to the back of the...


Analog signals have nothing to do with your problem. Make sure that the TV is set channel is set to 3 or 4 (cf read of Converter box for channel switch). The TV received signal from Converter box on Channel 3 (or AV Cables if you have them)

Jun 11, 2008 | Televison & Video

1 Answer

Cable box, digital service, channels not appearing


connect the RF lead from the wall to your cable box then out from that to your dvd then out from your dvd to your tv. now connect a scart lead from the cable box to AV 2 on the DVD then connect AV 1 on the DVD to your TV if you have a second scart on your tv connect that to the cable box. NOW on the DVD select AV2 now whatever is on the cable box will be recorded onto DVD/VCR. Put the DVD recorder into VCR mode and set it to auto tune all the Digital Video Broadcasts. You cannot physically tune the cable boxes own channels into the DVD via RF it has to be via a scart.

Apr 27, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

Sony TV snow at startup


Bad solder connection in tuner.....replace with new or rebuild.
............................T.

Mar 09, 2008 | Televison & Video

Not finding what you are looking for?
iLO 3200 32 in. LCD Television Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Televison & Video Experts

AFcityboy

Level 1 Expert

4 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...