Question about Audio Players & Recorders

Open Question

Arcam mcd multidisc cd player displays ''E7'' error message

I have a arcam mcd multidisc cd player which displays the ''E7'' error message and that's it, no buttons work etc but if i manually eject the disc tray and then switch the unit on, the display works normal but the tray will automatically close and display the ''E7'' msg again and that's it.

Posted by on

4 Suggested Answers

  • 1 Answer

SOURCE: NAD C541i CD Player won't turn on

I recently bought a second hand C541i as is and I had the same thing; no power up. I took it to a service centre, they re-soldered the connecting pins for the transformer socket. It now works well.
After that I realised that it could have been the problem with the Burson Audio clock that was installed buy the previous owner but had intermittent playback problems. A study of the schematic revealed that the +12v rail for the clock, is from a different secondary coil winding than the +5v for the DAC etc. And the -12v for the analogue output stage could be from a different pin on the connector as well.

I hope this helps.

Posted on Mar 03, 2009

  • 1 Answer

SOURCE: CD Player tray will not rotate or open or close - no power

my cd player will open and rotates but will NOT play, can anyone help me?

Posted on Dec 04, 2009

  • 99 Answers

SOURCE: My CD tray closes before I insert disk

check the micro switches on the cd mechanism. these can go wrong sometimes. it's obviously not sending a message to the micro chip that the tray is open therefor it will close again automatically.

hope this helps?

Posted on Jul 01, 2010

  • 11 Answers

SOURCE: i have a sharp cd-sx62v

Reset the player by pressing ON/STAND BY button and simulatenously press preset << and preset>> buttons of the unit.
This will reset the microprocessor of the player.

Posted on Aug 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

U70 error message on cd player


U70 error message on cd player - Fixya

www.fixya.com/support/t12308553-u70_error_message_cd_player
Apr 5, 2012 - U70 error message on cd player Cd player doesn't work at all. Displays 0 track, 0:00 (min,sec). The play - Technics CD Players question.

Technics error code f 70 CD Players Questions & Answers ...

www.fixya.com > Forum > Tags > error code f 70 > CD Players
Technics cd players error code f 70 related questions and answers. ... won't play cds changer turns on ok, reads error message I have the same problem.

Apr 05, 2012 | Technics Audio Players & Recorders

1 Answer

No display on MCD6 and cannot paerform any function


no power no action. check power source or call your place ware u brout it. if no help on get n it up n running u mite have 2 find a way 2 reboot it. or your unit is off system check.

May 09, 2011 | M&S Systems MCD-6 6-Disc CD Changer

1 Answer

Door keeps opening.


Replace the loading tray belt, it is quite a common problem on CD Players using the same Sony transport mechanism as your Arcam.
The belt loses its tension and cannot fully load and then spits the tray open.
When you try to load a CD you should be able to hear a whirring sound after closing the tray and that's the motor trying to lift the laser mechanism at full travel but is unable to hence not enough tension on the belt.

Hope this helps.

Jan 18, 2011 | Arcam Alpha 7SE

1 Answer

My cd player stopped working the power light is not showing i have changed the lead to make sure it was not the fuse


Check for bulging / leaky capacitors on the main PCB, they are a common problem on Arcam CD Players.
There should be a few 25v 1000uf caps scattered around, check those first.

Hope this helps.

Dec 04, 2010 | Arcam Alpha 7SE

1 Answer

The tray on my Arcam Alpha 6 CD player will not eject and refuses to budge. Neither the remote control nor the load button on the front of the unit will make it open.


It's either the gear on the tray loading mechanism or it's drive belt. The gear is made of a soft material and the teeth wear down on the hard tray rack. Get hold of Arcam and order TP21H replacement part and belt. The same happened to me and the gear had perished. In the meantime stick something onto the front of the tray that you can use to pull it open after you have pressed the 'load' key. Place your CD in the tray, press the 'load' key and push the tray closed manually. The player will work like this until you can replace the gear/belt.

Jul 04, 2010 | Audio Players & Recorders

1 Answer

My CD tray closes before I insert disk


check the micro switches on the cd mechanism. these can go wrong sometimes. it's obviously not sending a message to the micro chip that the tray is open therefor it will close again automatically.

hope this helps?

May 10, 2010 | Arcam Alpha 7SE

1 Answer

American Audio Mcd-810 dual cd/mp3 player


i know its the tray belt.because,the same thing happened to me.my player would sometimes say error. or sometimes it would not read any cds.because,the tray would not close tightly.im shure its an easy fix.i did mine by my self.

May 31, 2009 | American Audio Mcd810 Dual Mp3 CD Player...

1 Answer

Where is the volume control on the BSR MCD-8000? I can't find it on the unit or the remote


There is no volume control. If you look at the MCD 8000's front panel, you'll see there is none there either. The volume is a function of your amplifier or receiver.

Apr 06, 2009 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98694 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69649 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...