Question about ASUS P5GDC-V DELUXE P4(S775)/915G/DDR1+DDR2/V&A&L/ATX Motherboard (MOTAS42)

1 Answer

Can,t get on the internet or listen to any music!

I changed the harddrive for a new 400GB loaded my os XPPro & service pack 2 combined disk that came with my computer & every thing seemed fine until i tried to connect to the i-net & then tried to play some music & thats when i found the problem of no sound & no i-net. So frantic now to find my support CD with all my drivers & after turning the house upside-down,thay seem to have vanished.
So if you can help me by sending me the 1GBIT Marvel Yukon controller/drivers to this machine of my sons so i can load it on a flash drive stick & then run it on my computer.
My Motherboard is a ASUS P5GDC-V, & as soon as i am on-line i will connect to your site for an update of all my drivers, thank you mark sewell. phone No.07849 922354... E-Mail: marksewell1958@hotmail.co.uk p.s. "very slow one finger typist"

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 158 Answers

Hiii, to download the driver for your ASUS motherboard, please visit this website i.e. http://support.asus.com/download/download.aspx?SLanguage=en-us
 Here, you just specify your requirement or scan your pc for driver as a new user. After downloading the driver you just install it one by one and after single installation please reboot your computer.

Posted on Feb 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to setup a new xp windows


Restart your computer during the boot process you will see on the screen to press a certain key to enter setup usually the delete or F2 key


Press and hold that key during the boot up process to enter BIOS then using the arrow keys scroll down to advanced bios features press enter change your first boot device to cd press escape then press f10 to save to cmos to restart


note this will erase you operating system you will have to have an operating system disk to load it onto you hard drive or create a partition to load another operating system


note after you have loaded the operating system you should go back and change the first boot device to failsafe or optimised defaults

after windows has loaded


your computer will automatically restart it might restart 2 times one to finish the installation

the next will be because the operating system is loaded and will boot from your cd


if your installation disk is only a service pack 1 or 2 you might need to create an xp sp3 disk

http://windows.microsoft.com/en-US/windows/help/learn-how-to-install-windows-xp-service-pack-3-sp3

if you have a copy of windows service pack there is a program that allows you add service pack 3 to it so you have a copy of xp sp3
http://www.nliteos.com/changelog.html


hope this helps

Oct 12, 2012 | Fujitsu Computers & Internet

1 Answer

The harddrive files seem to be gone and it will not load the OS cd. it keeps saying harddrive not found. what do i do?


Hi,
When you use OS CD it has to boot, there's nothing like it will not load. Check in the BIOS what is the boot option. If your first boot device is hard disk change it to CD-ROM and then boot your PC. Then you can start reinstalling the OS.
Regards

Mar 18, 2010 | Dell Inspiron 1525 Notebook

1 Answer

I upgraded my hp pavilion zd8000 to 2GB of ram. When I try to load windows XP, I get a can not format disk error. I removed 1 GB of memory and added 250 K in it?s place and everything installs and runs OK....


what service pack are you running ? if you have service pack 3 installed you can not reinstall the OS period , you'll have
to remove the service pack 3 and go back to service pack 2
ram and the HDD don't have any connection with the OS
you can try switching out the ram to another computer for
testing and for checking the DIMM slots on your computer
if its a notebook there will be only 2 slots if its a PC you may
have 4 check your manual for 1234 configuration they never
go as 1234 its usually 1324 , windows XP 32 bit edition will only
hold 3072 MB of Ram while the 64 bit edition will hold up to 8
gigabytes .

Mar 11, 2010 | HP PAVILION ZD8000 SEREIS 100GB (4200...

1 Answer

Got a brand new 5630ez. trying to boot it up. can't get by the acer erecovery management. I'm new to computers


you might have to reload the os or flash the bios.you can only reload it by haveing a operating system installation disk.

not so good with flashing bios but you can look it up.i will tell you how to load the os

back up all of your data(music,documents,videos)before you do this..if you can boot up then use ubuntu,slax or other types of bootable cds to set it back to the factory setting you are going to have to get a xp installation(asuming it is xp,or what ever disk came with your comp)the disk should say operating system on it.what you do is put the disk in and boot off of it.if this message don't come up 'press any button to boot from cd......' then your going to have to go into the bios and change the cd drive before the harddrive.if the message does come up hit any button and wait for the blues screen.after it is loaded hit enter f8.if a screen says existing operating systems hit esc(on that screen there is a option to repair the os but you have to know th command lines to do so).if not and it goes to the partion screen then delete the existing partion and create a new one.to do so go to the partion and (delete)hit d L enter.(create)c enter. after you have formed a new partion hit enter....it will format the drive(delete everything)after it is done formatting it will start to instal the os.in xp it will stop 2 times for your input.after everything is done loading you should be able to custamize everything and install things.in the bottom right hand cornor there should be a marker telling you to activate windows.click it and use the product key on the side of your comp(laptop under it)if there is none there try keyfinder..also be aware that you have to reinstall office, antivirus and other programs. so make sure you have all of the cd's

Aug 09, 2009 | Computers & Internet

1 Answer

Technic GN3 Organ 3 1/2 floppy drive will not read 720mb DD disks


Hello,

You can change SY-FD20 floppy drive by a new one, modified to work on.
Service Manual, Schematics, pinout and floppy drives available : http://floppy.shugart.free.fr/page.php?page=materiels/technics/sy-fd20/index.htm

Jun 10, 2009 | Technics SA-EX320 Receiver

1 Answer

Replacement harddrive into acer pc


No matter what you do, you need to partiton and format the drive and install an OS, be it with the Acer recovery disks or with an original XP install disk. You will need to boot from your CD drive to install the OS, if your drive is not bootable you will need to boot from a floppy and load drivers for the CD drive. For information on how to get these boot floppies check out this Microsoft link:
http://support.microsoft.com/kb/310994

Apr 13, 2009 | Acer Aspire T310 PC Desktop

2 Answers

Install XP/sp3 on toshiba portege R500


Do you have XP or Vista installed on your laptop?
Does you laptop boot up into Windows?
What steps are you doing in trying to install the Service Pack?

You have to install the correct Service Pack for youe laptop, these were released in 2008.
SP3 is for Windows XP.
The service pack for Vista is SP1

Jan 02, 2009 | Compaq Armada E500 Notebook

1 Answer

Hi i am tryning to load an operating system onto my brand new hard drive. It keeps coming up with disk boot failure, insert system disk and press enter.. what do ido


Hi, By brand new harddrive, I assume that its fresh and empty.
You need to install the Operating System (OS) in that harddrive.
You can do that my inserting the OS installation CD/ DVD into the drive before you bootup.
If you still get the error, get into the setup mode and change the boot sequence to boot from CD-ROM first.
Hope it helps :)

Sep 21, 2008 | Computers & Internet

2 Answers

Game guard dump_wmimmc.sys


Cloaked Malware. The Process is packed and/or encrypted using a software packing process. DUMP_WMIMMC.SYS has been the subject of the following behavior:
Created as a new Background Service on the machine
Loaded and Executed as a System Driver File
Deleted as a process from disk
Created as a process on disk

This file I believe it is from GameGuard, Nprotect.

Aug 20, 2008 | Computers & Internet

1 Answer

Help me ! Lacie ED Disk Ethernet 10/100


if you are using (sata)harddrive dont install windows 98.i have a solution now before connecting your harddrive change the jumper to the slave (for single harddrive and single cd-rom or combo drive).it will work.plz install windows xp (service pack 2) or windows vista these are good versions for all!

Dec 07, 2007 | LaCie (300770) 250 GB Hard Drive

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

David
David

Level 3 Expert

781 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...