1 linksys wrt54gs router 2 xbox 360's and a not open nat setting
Ok i'd like to get it configured so that both of my 360s have an open nat setting, i currently have it so one of them is, but everytime i turn on my 360 i have to unplug my router, and the nat setting is not limited but not open either therfore problems connecting with my friends
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. Log into the router using 192.168.01. or 192.168.1.1 this is done using a browser window such as Internet Explorer or Firefox. 2. go to Application & Gaming 3. In the box on the right column us wan to enter the device ( example: Xbox) 4. you need to enter the start and end port next ( example: 88 and 80 5. then your protocol ( example: tcp ,UDP, or both 6.the IP address if next 7.check enable 8. then save 9.
here is the site with an example page to configure your
How do you connect your Linksys router to Belkin router? Do you connect your Linksys router to the Internet/WAN port of the Belkin?
If so, what is the Internet connection type set in your Belkin router? Is it dynamic?
If the Belkin router is set to dynamic IP and if it is obtaining an IP address from your Linksys router(you may check the status page of your Belkin router and look for IP address), then you may need to forward or set that IP address as the DMZ to your Linksys router. Make sure that XBOX is still configured as the DMZ host in your Belkin