Question about Hitachi 61SDX01B 61" Rear Projection Television

2 Answers

Everything work's on the tv there's no visible picture

Sound is coming out of my tv but the picture is not coming on the screen

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Did the picture die real slow ?

Posted on Mar 05, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The same thing happend to my 62 in you most likely need to buy a new convergence board which is in the $3000-$5000 price range so you would be better off buying a new tv thats what i did that is the biggest flaw in projection tvs

Posted on Feb 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a lg 32" tv and have connected everything


Dark picture means you have low brightness on the screen. Please increase the brightness. Also try increasing the back light intensity.

Sep 11, 2014 | Televison & Video

1 Answer

Horizontal small green lines, with no visible picture. Toshiba 52xv645u model. Menu screen is visible. Today, the tv works again.


It sounds that the LVDS cable; the cable that connects to its T'Con board to panel have loose contact with its edge connectors. Re-set it once and check. For more information go to http://electronicshelponline.blogspot.com/

Dec 16, 2013 | Toshiba Regza 52XV645U LCD TV

1 Answer

Samsung TV will not turn on.


OK if it is LCD your and have sounds but no picture you possibly have faulty inverter board that need to be replace

Dec 03, 2012 | Samsung LN-S4692D 46 in. LCD HDTV

2 Answers

The red light turns on but no picture comes on


Get real close to screen and maybe use a flash light to shine on the screen and see if you can see the picture still, it will be dark and almost not visible but you should notice something move. If your screen has picture then you most likely have a back light problem. Most common problems are bad inverters, or the inverter controller card. possibly a bad power supply but most likely inverters, test each circuit, replace as needed.

Sep 17, 2012 | LG Televison & Video

1 Answer

My Westinghouse 36 inch TV has picture and sound when I turn it on but when I change channels, the picture disappears and I have only sound. The picture comes back if you turn the TV off and back on but...


Hello, it sounds like your inverter board is goin out on the set, when you change channels if you notice on almost any TV the screen goes dark and the new channel appears, it sounds like you are not getting enough power out of the inverter board to power up the backlight enough to come on. This is why the sound remains because everything else works fine and the sound is connected to the main board.

Nov 22, 2009 | Westinghouse LTV-27w6 27 in. LCD HDTV

1 Answer

No picture just sound


Your projection tubes are messed up. It's a very expensive fix, just get a working TV off craigslist with a smashed screen and reuse your screen itself (usually 100-200$) or just toss the TV and upgrade to an LCD

Apr 29, 2008 | Mitsubishi VS-6043 60" Rear Projection...

1 Answer

No picture but sound works.....


  • adjust brightness setting when playing tv.
  • adjust screen control located on flyback transformer.
  • hope this will help.

Oct 23, 2007 | Sony KV-36FS16 36" TV

1 Answer

Circuit board was damaged in electrical storm. Replaced with new board. Now, screen comes on full raster, but with retrace lines. Picture is very faded and barely visible behind lines. Sound is OK and...


I am unable to find in your statement about which brand or type of motherboard is used. One thing i come to know your using service mode kit. knowing in your statement your are a technical person. My simple idea is first you set the TV in standby mode using remote. Then in FBT reduce the screen control minimum position, the release standby. Now the tv is oscillated, now slightly increase screen control till get maximum video and zero retrace line set in position. Even no improvement give me clear picture of brand and microprocessor ic etc. there is a chances to solve by having the above details.

Aug 27, 2006 | Sanyo DS31520 31" TV

Not finding what you are looking for?
Hitachi 61SDX01B 61" Rear Projection Television Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2294 Answers

The Knight
The Knight

Level 3 Expert

71672 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...