Question about HP Computers & Internet

1 Answer

Sound When playing music it skips, stops as if I'm playing an audio cd.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,992 Answers

This can often be resolved by reinstalling the sound drivers, which may have been corrupted by some application. The drivers can usually be found in a directory on the disk drive somewhere, on restore CD's that may have been supplied with the computer, or by downloading from the manufacturer's website. It's best to get the drivers from the website, since you will get the latest version the manufacturer offers. They may have updated the software to take care of problems. You can also get full details about installation at their site, but it's usually a matter of downloading the driver package and running it.

It's also possible the application you are using to play music isn't working properly with your sound device. Try downloading an updated version if one is available.

A final possibility is that the sound circuitry itself has gone bad. It's not likely, though, and if other WIndows sounds are normal, the hardware probably just fine.

If this solution has given you what you needed, please take a moment to rate it. Thanks for asking here!

Posted on Feb 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SYSTEM SKIPS CDS AND MUDDLES SOUNDS


The laser pickup over time becomes weaker until it starts skipping and will not play sound in some cases. Try a cd cleaning kit and follow instructions, if no change unit will need to be replaced.

Aug 16, 2012 | Venturer Home Stereo AM/FM Cassette 5 CD...

1 Answer

I have lost the Instructions for my portable CD/MP3 player. I simply need to know what the various buttons do: Mode: 10+Album:Skip/Search: Play/Pause: Stop :Eq/Prog : Vol+-


mode: for repeat
10+Album: to change song more than 10 like 11 19
Skip/Search: press one time will go to next song press and hold search the song
Play/Pause: start playing song or make it stop
Stop : stop the song you are playing
Eq/Prog : setting menu
Vol+- increase or decrease the sound

Jul 29, 2011 | Audio Players & Recorders

1 Answer

Stops and starts at random. don't have manual. craig model #cdm2891 so don't know whay all the buttons are for


Hi there.
I'm assuming this is the CD Player you own :

http://www.craigelectronics.com/product_detail/personalCDPlayer/CDM2891.html

I only ask as this brand does not exist in England. However I know that if your portable CD Player is cutting out sound, this is due to excessive movement fron being in a pocket or from being in a bumpy car. The cutting out is because the "Antishock" has not had a chance to store the music information, so instead the unit just pauses or cuts out sound.

-> Once = Skip track forward
<- Once = Play from start of track or skip backwards
Hold down either of these to fasst forward or rewind
The square means stop
II = Pause (press again to resume....sometimes pressing play will resume too)

These are universal key functions. Having not seen the item before, I am unable to guide furthur unless you can direct me to some pictures that I can see the function buttons larger and can explain what they do

All the best

Jan 13, 2011 | Audio Players & Recorders

1 Answer

The cd skips When I put a new cd in, it begins at one then skips to much higher numbers. I have cleaned the cd. Used a laser cleaner disk and I do not know what else to do. Am very frustrated. I have dried...


The "read-ahead" memory cache is too short.
Not much you can do, short of replacing the player; however:
Does your CD player support playing MP3's?
Convert your Audio music CD's to MP3.
The same audio music is "smaller" in MP3 format than audio format. More of the song can fit in the memory cache so it is less likely to "run out" of mermory and skip.

Oct 13, 2009 | 2004 Toyota Sienna

1 Answer

No music or videos will play without skipping


hii
to resolve your this problem i need to know the configiration of your system.For further assistance you can visit-----http://techbuddies-robin.blogspot.com/2009/06/free-computer-related-technical-support.html

Jun 13, 2009 | HP (400745-001) Sound Card

1 Answer

CD's skip, then completely stop playing on my 1999 acoustic wave


Sounds like a maintenance issue - try cleaning the disc lens using a standard disc lens cleaner (you can buy in many high street stores) or using a lint-free cloth on the glass eye.
Otherwise, contact Bose.

Dec 09, 2008 | Bose Acoustic Wave music system II -...

1 Answer

DVD Problem


The Magnavox MRD500VR is not used for music cd's thats why.....

Nov 23, 2008 | Philips Magnavox MRD500VR System

4 Answers

Intermitent audio


I had that happen before, one problem was my car had bad shocks or i hit a pothole in the road. The second time i had the volume up so loud the bass wass thumping the floor and it skips the CD. My question is, how lowd is the thign turned up? :P Some CD players load the data into a memory and then it plays from the memory till it needs more info. It maybe that the unit is not stable or the CD is not balanced right so it cant read the info at a consistant speed. The music maybe playing faster then it can read because of the vibrations. Is the disk clean? i know this may sound dumb but it is easy to over look. If the surface of the data side is so scratched up it may have problems reading the data quickly enough. Sometimes the coating can fall of the disk if you hold it in the light you can sometimes see spots threw the disk where the foil has been chipped off. The CD player could have a focus problem also, it could be damaged in shipping or have been dropped and it cant focus properly on the data. Do you have any other disks to try? a new one? one you never play?

Apr 04, 2006 | Philips CDR785 3-Disc CD Recorder

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...