Question about SanDisk Sansa m230 MP3 Player

2 Answers

Sandisk will not format? trying to format sandisk 2gb but just keeps saying cannot format?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 630 Answers

Check that the write protect switch isn't in the safe position

Posted on Oct 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,234 Answers

  1. 1 Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com
  2. 2 Open up 'My Computer'. You should see it under the list of available drives.
  3. 3 Check its contents first to make sure that you have the right drive.
  4. 4 In 'My Computer', right-click on the drive and choose 'Format'.
  5. 5 Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.
  6. 6 Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.

Posted on Aug 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What type sandisk mirco sd cards work?


You didn't buy a microSD card, you bought a microSDXC card.

The Eclipse 180 works with microSD cards (2GB or smaller) and microSDHC cards (32GB or smaller). It does not work with microSDXC cards.

Jul 26, 2014 | Mach Speed Eclipse 180 MP3 Player

1 Answer

My sansa 2gb thing won't work


tried formatting your player? remember to do a backup of your mp3 data before

May 20, 2009 | SanDisk Sansa e260 MP3 Player

1 Answer

PMD620 won't recognize SD card


I'm using Sandisk 2gb SD card in my Marantz pMD 620. I've formatted the card but after 5 minutes of recording it stops says Err 8

Apr 05, 2009 | Marantz PMD620 MP3 Player

1 Answer

My sansa fuze 2gb screen keeps saying not enough space and then turns off.


try plugging it into the computer back up all the music and delete some of the songs then try tuning it on again

Mar 20, 2009 | SanDisk Sansa Fuze MP3 Player

1 Answer

Says i need to free 4mb of space


You need to format the device:
Format
This will format your Sansa c200 player’s internal memory
1) Select Settings from the Main Menu.
2) Select Format
3) Select Yes to format the internal memory or No to cancel.

-Tha Mp3 Doctor

Nov 27, 2008 | SanDisk Sansa c250 (2 GB) MP3 Player...

1 Answer

Sandisk 2GB Mp3 player


These are the most common methods for recovering Sandisk's Sansa Mp3 Players. I have been almost universally successful in recovering Sansa players using one or a combination of these methods. These methods do not work if you are having synchronization or music format issues - they are for recovering a player that will not power up, freezes, flashes, is not recognized by the computer, and a host of other issues.

Reset the Sansa Player first. On most models, restart is done by holding the power button in for 15 seconds or longer. Check your specific manual to be sure. The manuals are available from the Sansa website if they have been misplaced.
Download the Sansa Recovery Tool from the Sansa website.
Format - Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "Sansa 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
Firmware Upgrade- Erases Everything: Get the latest firmware upgrade from Sansa - it updates the firmware and erases every song in the player all at once. Note: this method doesn't work if already have the latest firmware. Go to this website and click "Firmware Updater" to find out: http://www.sandisk.com/DriverDownload/driverList.asp
If these fail, then:
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
If you get the problem where MTP Device keeps popping up continuously, uninstall the “MTP Device” by going to Start à Control Panel àSystem à Hardware à Device Manager (you computer may vary slightly, depending on Windows Version).
You may have to restart your computer after each of these methods to get them to work properly. Disconnect your Sansa player BEFORE shutting down your computer.
-Tha Mp3 Doctor

May 16, 2008 | SanDisk Sansa Clip MP3 Player

1 Answer

It shows Sandisk logo and freezes there


Remove the SD card and try this;

Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted.

http://rapidshare.com/files/67740173/e200fw01.00.12.exe____

You need to put the device into "recovery mode" before you run the tool.

- Turn the device off (hold power for 20 seconds)
- Slide the hold switch into "hold" position.
- Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer.

Then run the recovery tool. Select format when prompted.




Best of Luck.

Nov 13, 2007 | SanDisk Sansa e250 MP3 Player

1 Answer

My Sandisk Wont Turn Stay On


Run the recovery tool from the SanDisk website. Make sure you select "format" when prompted.

http://www.sandisk.com/Assets/File/Downloads/firmware/e200fw01.00.12.exe

You need to put the device into "recovery mode" before you run the tool.

- Turn the device off (hold power for 20 seconds)
- Slide the hold switch into "hold" position.
- Press and hold the "record" button while connecting it to your computer. Keep holding the "record" button until you see the "new hardware found" on your computer.

Then run the recovery tool. Select format when prompted.

Best of Luck.

Oct 13, 2007 | SanDisk Sansa e260 MP3 Player

2 Answers

Downloded recovery from sandisk website now get error msg


That software only works with the non-Rhapsody versions, hence the error message. You can call technical support and they can walk you thru the fix. Its too much to type. SanDisk Technical Support 1-866-726-3475 Best of Luck.

Sep 10, 2007 | SanDisk Sansa e250 MP3 Player

1 Answer

482mb instead of 2GB


Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

Mar 07, 2007 | SanDisk Sansa e250 MP3 Player

Not finding what you are looking for?
SanDisk Sansa m230 MP3 Player Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk MP3 & Digital Media Players Experts

kakima

Level 3 Expert

96683 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a SanDisk MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...