Question about Computer Monitors

1 Answer

Proview 900 series black flat panel monitor

I've had my monitor for over a year, and all of a sudden, the monitor is in hybernation mode. Blue power light blinks. That's all it does. It won't come on. In control panel, I made sure it's set on, "never turn off monitor", so I know the settings in the computer are set right.  Another monitor hooked up to the computer works fine. Any help? It's only  1 year old.   I've replaced ALL electrolitics capacitors of 200-000-170DTLBMH power suppy that comes with proview 900w and it is still going black every 5-10 seconds after turn on (while the power led is still on). Any other idea? Thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Its sound you have bad inverter chip. The I.C. "BIT3193G" is the main controller in the inverter circuit. This chips is a surface mount chip and you must be careful remove it or you can damage the board. Also have you check for any burn out transistor?

Posted on Mar 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a xerox Flat Panel LCD Monitor 19" i purchased at office depot in 11/05, manufactured by Proview Technology, Inc. Model# 900P. I love this monitor, about 1 year ago I moved and it went into...


Depends where it was in storage. It may have got damp.
I would try leave it inside in the warm and try again.
If no luck it would probably be cheaper to get a new one than getting it repaired. A 19 monitor start at about £70

Sep 04, 2010 | Computer Monitors

1 Answer

Proview Monitor PL926 Wbi The power indicator


Repair estimate will be according to problem.

Nov 13, 2009 | Proview PL926WBi 19" LCD Monitor

1 Answer

Monitor screen is black


bad capacitors on the power board internal to the monitor they need to be replaced.

Mar 02, 2009 | Proview PL913S 19" Flat Panel LCD Monitor

3 Answers

LCD display Proview


If the screen is pinkish chances are the panel is defective.Should follow-up with Company Proview and do some correspondence.
Samir

May 23, 2008 | Proview PL926WBi 19" LCD Monitor

2 Answers

PROVIEW FLAT SCREEN TFT 17" MONITOR


the vga mode not suppopt is on and not working

May 07, 2008 | Proview PL713S 17" Flat Panel LCD Monitor

1 Answer

Proview PRO576 error message "mode not supported" and will show nothing else


Okay, we got a fix by having another monitor hooked up to our computer and going in to display and changing the display settings to a lower setting. The screen resolution - turn it to lower - I guess somehow - the setting was too high for our monitor. Don't know how it changed itself though. Anyway, change it to a lower resolution then re-hook up your monitor and see if it works. The reslution can be pushed back up until you notice the problem again.

Mar 05, 2008 | Proview PRO576 15 in. Flat Panel LCD...

2 Answers

Proview 900 series black flat panel monitor


Same problem, and solution 1 given here fixed my Proview 900W. A few of the 470uF caps on the power board were oozing dielectric probably due to overheating. Hopefully the replacements will hang in there for a couple more years...

Oct 17, 2007 | Proview PL926WBi 19" LCD Monitor

1 Answer

Doesnt power up


Most common problem is inverter board.

Dec 23, 2006 | Proview PL 566s 15" Flat Panel LCD Monitor

Not finding what you are looking for?
Computer Monitors Logo

Related Topics:

1,041 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...