Question about American Diagnostic Corp ADC 4500-1 Diagnostic Replacement Lamps Replaces Welch Allyn 00110,04700

1 Answer

What are the troubleshooting in ecg? - American Diagnostic Corp ADC 4500-1 Diagnostic Replacement Lamps Replaces Welch Allyn 00110,04700

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Those are some examples of ECG malfunctions and troubleshooting however there are to many more problems that you can find in ECG equipment. If the problem is not on this short list you can contact us. Or another Medical Repair Organization (MROs).

  • Symptom: Machine runs, but the thermal tip stylus does not write or writes very lightly.
  • Possible cause: (1) Too little heat on the stylus tip, (2) insuficient stylus pressureon the paper.
  • Troubleshooting: (1) Using a insulated probe, such as a srewdriver, gently press the stylus onto the paper. (2) Is a dark line appears on the paper, the problem is too little pressure, but if no dark line appears, the problem is not enough heat.
  • Symptom: Smeared trace
  • Possible causes: Worn stylus or incorrectly loaded paper.
  • Trobleshooting: Check paper loading and if proper, check stylus, for wear, pitting, or another irregularities.

Posted on Sep 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to load paper


How to load paper - Fixya

www.fixya.com > Forum > EKG/ECG Machines
39 mins ago - How to load paper - EKG/ECG Machines question. ... Machines. Open Question ... Aug 30, 2012 ' Schiller Cardiovit At 2 Light Ecg Machine.

Loading paper into the MAC 1200 ecg machine - Fixya

www.fixya.com/.../t4590309-loading_paper_into_mac_1200_ecg_mach...
Apr 19, 2010 - loading paper into the MAC 1200 ecg machine how to load the paperinto the machine? ... Ge Medical Systems Ge Marquette Mac 1200 question.

Contec ECG Monitor & pulse oximeter Ekg printed sheet ...

www.hcuck.com/search/p1207318-contec_ecg.../ekg_printed_sheet
Question about Ge Medical Systems EKG/ECG Machines ... Open the . ... ...ekg-manual The paper is is backwards, there are 4 ways to load paper BUT only 1 ...

Electrocardiograph (EKG / ECG) Questions and Answers


Dec 21, 2015 | EKG/ECG Machines

1 Answer

I have a Mortara ECG machine that I need to take back to factory settings and remove all preprogrammed persistent forms. Any ideas?


Hey Bro,

First, tell me what model of MORTARA ECG are you referring to. I work with different models of MORTARA ECG for some times. Maybe I can help you.

Jul 17, 2012 | EKG/ECG Machines

1 Answer

The battery on my ECG is not working. Can I use the ECG?


Hi,
Its recommended that you should take the ECG on battery backup. Because if you use power line while taking the ECG there is a possibility of interference on the base line. Try to replace the battery before taking ECGs.
OK

Jan 31, 2012 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

How can I print out a stored ECG on the MAC 1200? After I choose the ECG, select 'Print' and press 'Enter' I get taken back to the ECG screen. Please Help!


Hi,

- Go to the storage program by pressing "Shift" + "Store/retrieve" simultaneously.
- using the down arrow, move the cursor to the space where your ECG's are listed and underline the ECG you wish to re-print.
- Once the ECG is underlined, press "Shift" + "down arrow" simultaneously. Two little cursors will state that the ECG is selected.
- Press "Enter". The cursor will come back on top of the screen, on "Print".
- Press "Enter" again. The machine will start to print.

I hope this helps !

Fel

Nov 09, 2011 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

How does ECG machine find that signals are good for printing (in auto mode)? some ECG machines take up to 20 second time for printing start


hi,
When the at2 is in auto mode, first of all it check the leads are properly connected or not.Then it will acquire the ECG and store the same in its memory then only it starts printing. that's why it takes that much time to give a printout. When its starts printing you can remove the connections from the patient because it have already memorized the ECG.
If interpretation is in on position it will compare the acquired ecg with the standards in its memory (allready programed by the manufacturer). and will give a detailed report with ecg.
ok

Feb 04, 2011 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

Troubleshooting


What is the fault detail, losing time & date?
Bob - www.woodenmen.co.uk

Apr 24, 2010 | Ge Medical Systems Ge Marquette Mac 1200...

1 Answer

What does the Power line data interference error message on the GE MAC 5000 ECG machine mean? We do not have a troubleshooting manual to review.



It means there is electronic noise coming from your electrical outlet. You can test to be sure by trying the unit unplugged from the wall. If it does not give the same error then it is definitely you power outlet.

Apr 15, 2009 | EKG/ECG Machines

1 Answer

ADC for ECG signal


example of design circuit using OTA to detect EMG/ECG signals.

Feb 27, 2009 | ADC EKG/ECG Machines

Not finding what you are looking for?
American Diagnostic Corp ADC 4500-1 Diagnostic Replacement Lamps Replaces Welch Allyn 00110,04700 Logo

984 people viewed this question

Ask a Question

Usually answered in minutes!

Top American Diagnostic Corp EKG/ECG Machines Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Iron
Iron

Level 3 Expert

3018 Answers

yadayada
yadayada

Level 3 Expert

61101 Answers

Are you an American Diagnostic Corp EKG/ECG Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...