Question about Indesit WA 125 Front Load Washer

1 Answer

My indesit widl 126 is not drying. - Indesit WA 125 Front Load Washer

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My indesit widl 126 is not drying.

Posted on Jun 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Indesit Washer/dryer (WIDL 126 S), and it is dot draining the water. I set in on drain or dry and nothing happens, it just fills with more water.


HI,
Check back of washe with a flashlight for a bent or clogged drain hose. Do not move washer to check it. When you move it , it will straighten out and you will never know if it was bent
Also while it is pumping , pick up end of drain hose at drain and observe the volume of water being pumped.
If no water then the Pump needs replaced.
Thank you for using fixya
Leo Ponder
Please rate me if this helped

Aug 12, 2011 | Washing Machines

1 Answer

Washingmachine error


Looks like some electric breakdown. Major repairs is requied; probably a new machine. It is now a case for the insurance company.

Sincerely Michael

Dec 03, 2009 | Indesit Washing Machines

1 Answer

Washing machine not working


The lid switch/latch has failed.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 10, 2009 | Washing Machines

1 Answer

I do i stop the indesit widl 126 mid cycle?


Open the door - or press stop/cancel.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jun 28, 2009 | Washing Machines

1 Answer

Indesit WIDL 106 wont start -ON/OFF-Door Led Flashes rapidly


It is a defectiv controller pcb. I think the eeprom on the controller pcb lost its program (happens often on Indesit machines).

The only solution I know is to change the controller pcb, - not a cheap solution.
I have the same problem with WIDL 106.

Dec 01, 2008 | Indesit W 123 Front Load Washer

1 Answer

Wiring for Indesit Widl 126


Tell me, is the machine compleatly dead or what is it doing?

Sep 10, 2008 | Indesit WA 115 Front Load Washer

1 Answer

Widl 126


hiya
this could be down to a poor connection from one pcb to the other, best thing to do is disconnect one block at a time (make a note of where it goes) and clean the connections.
REMEMBER TO UNPLUG FIRST

hope this helps


please dont forget to rate the helpfulness of this reply, thanks kj

Jul 21, 2008 | Indesit W 123 Front Load Washer

1 Answer

Indesit widl 126-problem with the drum,moving back and forth to much and noisy.


It would seem that the bearings go on this model, which causes the inner drum to knock and bang against the outer during spin. If you continue to use the machine without replacing both sets of bearings, it will cause irreparable damage and the machine will need to be replaced.

Apr 27, 2008 | Indesit Washing Machines

Not finding what you are looking for?
Indesit WA 125 Front Load Washer Logo

Related Topics:

529 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

neilmoto

Level 2 Expert

75 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...