Question about GE Profile Spectra JGBP90 Gas Kitchen Range

2 Answers

GE Profile oven won't heat up

Burners are working correctly as well as the broiler. The oven can be set at say...450 degrees but when you push start it will show 100 degrees and won't heat up

Posted by on

  • Anonymous Mar 19, 2009

    I have the same problem...what's the answer??

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 3,361 Answers

Check the temperature sensor with a OHM meter.
It should read 1100 ohms. If not, replace it.
Otherwise make sure the glow bar ignitior is coming on.
Ignitors however can glow and still be bad.

Posted on Feb 21, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The problem is most likely the ignitor. I had this problem and it was $290 to repair through GE ($90 of which was for the house call). The repairman spent less than 1 hour at the house.

Posted on Oct 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ge profile oven lock button won't go off


  • 1.Press the "Clear/Off" button on the control panel to reset the oven. This will clear the lock setting and unlock the door.

    2.Allow the oven to cool to room temperature to avoid turning the lock on again during this heating cycle.

    3.Reset the oven to the temperature you require to finish cooking by pressing the correct temperature control on the control pad.

    or

  • 1.If your GE Profile microwave won't turn on, unplug it, then plug it back in. A power outage may have occurred due to a power surge. Check your home's fuses and circuit breakers.

    2.Set the clock of your GE Profile microwave. Certain models will not operate until you set the clock. Select the "Clock" key and type in the correct time.

  • 3.Hold down your microwave's "Off" button. You may have accidentally hit the control-lock feature on your GE Profile microwave. Hold down the "Off" button for three seconds to turn the lock off.

  • 4.If the sensors of your GE Profile microwave are not working correctly, remove the food from the machine. If the sensors detect food-surface temperatures over 200 degrees Fahrenheit, it will not work properly until the area cools down.

  • 5.Contact GE Support if you are unable to resolve the issue on your own. Call the GE Support hotline or browse the help library on the GE website. You can also schedule a service visit on GE's website.

  • Nov 22, 2011 | GE Profile JK915 Electric Single Oven

    1 Answer

    My GE xl44 gas range broiler won't work,


    Hi,

    The ignitor is not working right and is going bad....
    have the repair man replace the ignitor, or DIY....
    Check out this tip about your problem...

    Oven not Working or Oven not Heating

    Oven Problems Replacing the Igniter


    heatman101

    Jun 02, 2011 | GE Profile JGB900 Gas Kitchen Range

    1 Answer

    Our GE profile oven model JGsp31wet1ww oven will not heat up. When i set the oven to say 400 degrees, it just stays at 100 and never heats up. The broiler seems to work fine and the stove top gas burners...


    pull out the racks and remove the bottom floor of the oven,turn it on bake,if the ignitor doesn't glow most likely it's bad,if it does glow and it doesn't ignite within 40 to 60 seconds the ignitor is bad.even though it glows doesn't mean it's good,it works by amps.it takes 3.2 amps.for a flat ignitor to open the gas valve and 2.5 amps for a round ignitor to open the gas valve.

    May 15, 2011 | GE Profile Spectra JGBP90 Gas Kitchen...

    1 Answer

    GE Profile Stove baking option not working


    Possibly the bake igniter, the temperature sensor or the electronic oven clock/control. Does broil mode heat properly or does it run cool also? If broil heats to the proper temperature then the temperature sensor is probably ok. That leaves the ignitor or the controller which takes some more troubleshooting. If it is the controller, we repair them at www.fixyourboard.com.

    Aug 31, 2009 | GE JGRP17 Gas Single Oven

    2 Answers

    GE spectra xl44 not work


    I have the Ge Xl44 stove the burners and broiler work fine but the over will not heat up. How can I resolve this problem?

    Jan 21, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

    Not finding what you are looking for?
    GE Profile Spectra JGBP90 Gas Kitchen Range Logo

    2,416 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kitchen Ranges Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8205 Answers

    Ismael Rodriguez...

    Level 2 Expert

    162 Answers

     Fix Your Board
    Fix Your Board

    Level 3 Expert

    310 Answers

    Are you a Kitchen Range Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...