Question about Zanussi ZWD1480W Front Load Washer / Dryer

1 Answer

Error code E40 on Zanussi Timeline 1400 ZWD1480W

Did 2 loads of washing no probs, came to use dryer and flashed up error code E40 have read this could be a door related problem, cant see anthing wrong with door.Any ideas? Thanks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

E20 and E10

Posted on Mar 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset zanussi jetsystem programme function board with error E40


E40 is a door lock fault code, you need to replace the door lock,
you cannot reset the fault code, this happens automatically when the fault is rectified. nice easy job though.

Sep 30, 2016 | Zanussi Washing Machines

2 Answers

My Zanussi Jetsystem Timeline washer/dryer starts its wash cycle, but when it comes to draining, it wont drain and flashes E20.


Have you taken the filter out at the front of the washer and cleaned it. Mine wouldn't drain but once I did that it worked ok.

Mar 04, 2011 | Zanussi ZWD1680W Front Load Washer / Dryer

1 Answer

Hi, I have a Zanussi Timeline 1400 front loader and after it has completed a wash, it will not do another wash for some time. If you select a program it will think about it and then say it is complete with...


Try this..
Reading Error Codes
1. Wake the washer by pressing any button. 2. Wait 5 seconds. 3. Press and hold the START/PAUSE and CANCEL buttons simultaneously. As long as the buttons are held, the failure code will appear in the display as an "E" followed by two numbers, a number and a letter or two letters. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash. let me know what code come up.

Jan 30, 2011 | Zanussi ZWF1450W Front Load Washer

1 Answer

Washing Machine does not work and shows error code E40


E40 is a door related problem. Possible causes are faulty door interlock or door circuit triac on the main PCB.
Most likely cause is the door interlock.

Nov 14, 2008 | Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

Zanussi zwf1631w error code e40


hiya
E40 is the fault code for the doorlock, these are relatively cheap and easy to fit and if an independent (non zanussi) engineer was to fit it, you will probably be looking at around £40-£50 all in as a rough guide.

hope this helps

please dont forget to rate the helpfulness of this reply, thanks kj

Nov 10, 2008 | Zanussi ZWF1440 Front Load Washer

1 Answer

Zanussi zjd1219


Hi

Machine is showing E40 ERROR

Sep 07, 2008 | Zanussi ZJD1219 Front Load Washer / Dryer

1 Answer

Error`E40


hi there e40 fault is a problem with your door interlock. get it replaced and all will be fine..

Feb 28, 2008 | Zanussi ZWD1470W Front Load Washer / Dryer

1 Answer

E40 error code


The E40 error code indicates a loss of electrical power usually but not always due to the door not shutting properly or not locking. But, since you smelled burning it could be any electrical short that blew a fuse and shut the machine down. It could also be the motor windings with the internal overload protector shutting it down.

Dec 16, 2007 | Zanussi ZWF1440 Front Load Washer

1 Answer

RE: ERROR E40 ON ELECTROLUX ZANUSSI JETSYSTEM 1200


hi there e40 fault could either be your door interlock or main pcb

Dec 11, 2007 | Zanussi FJS1225W Front Load Washer

1 Answer

Door closed, but getting error E40


Look for solved probs in this site, you are sure to find something abt unlocking your door without a prob. You can look thru your model for solved probs.

Apr 07, 2007 | Zanussi FJD1466S Front Load Washer

Not finding what you are looking for?
Zanussi ZWD1480W Front Load Washer / Dryer Logo

1,030 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...