Question about Galaxy Radios DX-93T Base CB Radio

2 Answers

I have a galaxy (pluto) radio that does not go to set freqs till the radio is turned on for about 20 minutes.. then the radio works fine... maybe you can help me... thanks Dave .Melbourne Ont.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 64 Answers

The VCO sounds like it is being temperature sensitive remove the cover turn the radio on cold blow warm air from a hair dryer into the chassis on to the circuit board see if it works as soon as it gets warm if so check the voltage test points and have a VCO realignment done.

Posted on Sep 12, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Radio has a cold solder joint , take an eraser end of a pencil and lightly probe around the board to look for it this is the first thing to try

Posted on Feb 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to pair w/ipad?


On iPad, go to Settings (the cog wheel), Bluetooth. Make sure Bluetooth is on. Switch on your headphones. When iPad finds them, click Pair.

If you have any problems and Bluetooth is already on, turn it off and then back on.

Jan 16, 2016 | Radio Communications

2 Answers

How to connect to a Samsung tv


If you have Samsung wireless and need to pair them, then select sound, addition setting arrow down to Bluetooth ( may not be visible until you arrow down). Follow those instructions.
below this you will find how I set up old headphones.
I have a Samsung SU 4K, I also have an old wireless head phones. I did not want to buy expensive Bluetooth.
how did I make these work. First I purchased a digital optical convertor for $20. Since my headphones are 2 channel, I connected the base (red/white) to the convertor. Then I had to access Samsung menu audio. The Samsung TV has the manual built into TV terrible. Since I did not want the TV speakers off I had to find how to enable the output to headphones base. Select sound from menu , then additional settings , set audio format to PCM, also HDMI to PCM.

Jan 10, 2016 | Samsung Radio Communications

2 Answers

How to connect Motorola S10-HD Universal Bluetooth Stereo Headphones to Iphone 6 plus? Thanks!


turn bluetooth on ,on both units,search for devices with your phone when it finds head phones click on it and pair them

Apr 08, 2015 | Motorola Mobility S10-HD Stereo Bluetooth...

1 Answer

Why does the myzone headset we purchased not work, as the red light will not turn on?


Not sure how old this unit is but you need to check your battery connections for crud.

If the battery's have been leaking or the terminals are corroded it will not power up. I beleave that unit takes rechargeable batterys.

May 15, 2014 | Lands Phones

2 Answers

Phillips headphones


I would say a problem with the headphones, maybe they've been thrown around a bit?

Nov 17, 2013 | Philips SHB9100/00 Bluetooth Stereo...

2 Answers

How do i make it work with an i pod


You need a bluetooth adapter,
search for "bluetooth adapter for ipod" on Google or eBay, to see what's around.

Jan 28, 2011 | Insignia Bluetooth Wireless Headphones...

2 Answers

Motorola S805 headset worked fine with T60 laptop


Solution I found with the same devices is to properly par the devices.

Refer http://direct.motorola.com/ens/s805/QuickstartGuide.pdf

It basically states :

1.Ensure the headphones are turned off (L indicator light not blinking).
2.Press and hold L button. After about 6 seconds, the L indicator light becomes steadily lit.
3.Release the L button. The L indicator light remains steadily lit.

If the L indicator light is flashing or not steadily lit, repeat steps 1 through 3

Now on the T60:

Search for Bluetooth Devices as you would normally.
The T60 lists Bluetooth devices it finds.
Select Motorola S805.
Select OK or Yes to pair your headphones
with your phone.
Enter the passkey: 0000
Select OK.
When your headphones successfully pair
with your phone, the L indicator light
changes from steadily lit to rapidly flashing.

That's it next time you start a audio program on T60 output will be sent to Motorola Headphones

Nov 13, 2009 | Motorola Mobility S805 Wireless Headset

4 Answers

Compatibility issues between Nokia BH 503 headset and Nokia N82 . The official Nokia India website states that of all the Nokia Bluetooth Enabled phones in the Indian market Nokia BH 503 is not compatible...


my nokia is having a headphones issue
when i attach headphone wid my nokia 5233 it also show a notification like headset connect bt do not give sound in ear phones
i hav try many compatible headphones but it is still not working

Apr 16, 2009 | Nokia Bluetooth Headset Headset

Not finding what you are looking for?
Galaxy Radios DX-93T Base CB Radio Logo

Related Topics:

1,591 people viewed this question

Ask a Question

Usually answered in minutes!

Top Galaxy Radios Radio Communications Experts

yadayada
yadayada

Level 3 Expert

66126 Answers

Brad Brown

Level 3 Expert

14336 Answers

Mike Charette

Level 3 Expert

1774 Answers

Are you a Galaxy Radios Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...